844K

Equipment / NEW / Dozers / Wheel Dozers / 844K

METRIC

844K

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

SPECIFICATIONS

TOOLS AND EXPERT HELP

PRODUCT BROCHURES AND DOWNLOADS

MEDIA GALLERY

KEY SPECS

Engine Model C27 Cat®
Gross Power 561.0kW752.0hp
Bore 137.2mm5.4in

Get a quote

FIND A DEALER

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

Long Term Value and Durability

Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions.

Full box-section rear frame resists torsional shock and twisting forces.
Castings in the engine end frame are used in high stress areas to spread high loads.
Cast axle pivot mounting areas better disperse stress loads for increased structural integrity.
90 percent of the machine structure is robotically welded to provide highly consistent welds and increased strength.

Your key to maximum uptime and productivity is our purpose built front and rear frames.

Full box-section frames absorb torsional forces during dozing, maintaining alignment for hitch pins and drive line.
Spread hitch design features double tapered roller bearings and hardened pins that resist both horizontal and vertical loads.
Enhance strength in key pin areas through the use of one piece castings.

To ensure long life and reliability, solid one piece push beams are through-width, not merely attached to the side of the frame. In corner dozing, stresses are transferred and absorbed through a larger portion of the frame.

Built to Perform

Experience maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.

Simple side-to-side motion turns machine right or left, minimizing operator movements.
Easy to operate finger controlled gear selection.
Smoother, faster cycles and less operator fatigue through the use of low effort integrated controls.

Building your success begins with a best-in-class transmission designed specifically for mining applications.

Consistent, smooth shifting and efficiency through integrated electronic controls.
Long life and reliability through heat treat gear and metallurgy.
Three forward and three reverse speeds to match your application.

Durability and efficiency powering your 844K comes from the Cat C27 Engine. Optimum performance is built in through the use of a 12 cylinder, direct injection design.

Optimized performance and quick engine response with an electronic control module.
Reliable efficiency with complete control over injection timing, duration and pressure with Mechanically Actuated Electronic Unit Injection (MEUI™).
Extended engine life and improved fuel efficiency with reduced rated speed.
Designed to meet U.S. EPA Tier 4 Final or Tier 2 Equivalent emission standards.

Lower your cost per ton utilizing advanced ICTC and RCS for modulated rimpull.

Reduce tire slippage and wear by modulating rimpull from 100 to 25 percent while depressing left pedal. After 25 percent rimpull is achieved the left pedal applies the brake.
Reduce the potential for wheel slippage without reducing hydraulic efficiency with RCS.
Improve fuel efficiency in certain applications with our lock-up clutch torque converter providing direct drive.

Performance and Productivity

Operators increase productivity with our responsive implements feature.

Operate comfortably through electronically controlled hydraulic cylinder stops.
Handle easy-to-use soft detent controls.

Improve operator efficiency by matching the speed of the blade movement to your application.

Three different speeds: Standard, Fine and Fast.
Easily configured through the advisor display.
Only affects blade raise and lower functions.

Confident loader operation starts with precise machine control enabled by the 844K's load sensing hydraulic steering system.

Increase efficiency with our variable displacement piston pumps.
Achieve precise positioning for easy loading in tight areas with 35 degrees of steering articulation.
Enhance operator comfort with integrated steering and transmission control functions.

Benefit from extended performance and reliability of your hydraulic system with our advanced filtration system.

Lift/tilt case drain filters.
Lift/tilt high pressure screens.
Steering case drain filters.
Steering high pressure screens.
Hydraulic case drain filters.
Front pump drive lube filter.
Front and rear brake oil screens.

Work In Comfort

Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.

Enter and exit the cab easily and safely with these newly designed, ergonomic features.

Two side access points.
Fold up STIC steer/arm rest.
Reduced access stairway angles.

Enhance comfort and reduce operator fatigue with Cat Comfort Series III seat.

High back design and extra thick, contoured cushions.
Air suspension system.
Easy-to-reach seat levers and controls for six way adjustments.
Seat-mounted implement pod and STIC steer that moves with the seat.
76 mm (3 in) wide retractable seat belt.

Safely train other operators in comfort with our standard training seat.

76 mm (3 in) wide, retractable seat belt.
Fold-down design with molded drink tray and storage.

Your operator's productivity is enhanced with our clean, comfortable cab environment.

Experience reduced vibrations from viscous cab mounts and seat air suspension.
Maintain desired cab temperature with automatic temperature controls.
Pressurized cab with filtered air.
Sound level reduced to a quiet 69 dB(A).
Convenient floor storage tray/lunch box.

Integrated Cat® Technologies

The 844K electronic systems have been completely integrated to function as one machine. This integration creates a smart machine and more informed operator, maximizing the productivity of both. 844K Wheel Dozer

We have worked hard to help our customers and operators perform at their best through our Vital Information Management System (VIMS 3G).

Easy-to-view Advisor Display features a large screen.
Intuitive operation and easy navigation with our enhanced user interface.
Decrease service time by keeping operators informed about machine system malfunction or operation.

Operator comfort begins with personalized machine feature settings. Through our Advisor Display, an operator can instantly recall personalized profiles.

Store up to 10 separate operator profiles through Advisor.
Decrease setup time between operators by recalling personalized screen layouts.

Technology that Gets Work Done

Cat MineStar System is the industry's broadest suite of integrated mine operations and mobile equipment management technologies, configurable to suit your operation's needs. Its capability sets - Fleet, Terrain, Detect, Health and Command - contain a range of technologies that let you manage everything from fleet assignment and condition monitoring to remote and autonomous control. The 844K can take advantage of many of these advanced technologies, some of which are standard out of the factory. Fleet provides comprehensive, real-time machine tracking, assignment and productivity management, giving you a comprehensive overview of all operations from anywhere in the world.

Terrain with your 844K enables high-precision management of loading operations through the use of guidance technology. It increases 844K's productivity and provides you real-time feedback for improved efficiency. Detect helps increase operator awareness, enhancing safety at your operation. It includes a range of capabilities designed to assist the operator with areas of limited visibility around fixed and mobile equipment.

Health delivers critical event-based machine condition and operating data for your entire fleet. It includes comprehensive equipment health and asset monitoring capabilities, with a wide range of diagnostic, analytic and reporting tools.

Safety First

We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.

Wider stairs with reduced stair angles increase safety for operators getting on and off the 844K.
Walkways with non-skid surfaces and integrated lock out/tag out points are designed into the service areas.
Windshield cleaning platforms provide safe and convenient access for the operator.
Maintain three points of contact at all times through ground level or platform accessible service areas.
Emergency egress access.

Optional pull-down window shade and optional heated mirrors ensure extended visibility for safe operation.
Cat Detect with Object Detection System (rearview camera and radar) or Vision (rearview camera) option increases operator awareness around the machine.
Standard HID lights provide excellent workspace visibility.
Cab mounted LED warning beacons.

Low vibrations to the operator with viscous cab mounts and seat air suspension.
Low interior sound levels.
Operator training seat facilitates safe new operator training.
Standard 76 mm (3 in) seat belts on the operator seat and operator training seat.

The Cat powered access system allows easier access to the primary stairs by improving ingress and egress to and from the rear platform.

Safe, ergonomic access system.
All operators have adequate space when using the wide stairway.
Operators maintain three-point contact when using full handrails on each side.
Raise lower platform from cab level or ground.
Occupants can quickly exit with a conveniently located emergency release valve if the loader becomes inoperable.

Save on Service and Maintenance

Longer service intervals on fluids and filters.
Safe and convenient service with ground level or platform access and grouped service points.
Swing-out doors on both sides of the engine compartment provide easy access to important daily service checks.
Ecology drains for ease of service and prevention of spilling potential environmental contaminants.
Centralized remote pressure taps.
Reduce downtime with VIMS system notifications so your operators and technicians can resolve any problems before failure.

Top-Tier Service and Support

A valued partner, your Cat dealer is available whenever you need them.

Preventive maintenance programs and guaranteed maintenance contracts.
Best-in-class parts availability.
Improve your efficiency with operator training.
Genuine Cat Remanufactured parts.

Reduce Environmental Impact

Sustainability is designed and built into our 844K's features.

Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling.
Reduce waste to the environment with our maintenance free batteries.
The 844K is built for multiple lives. To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certified Rebuild programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost.
Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. And, when you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process.

Purpose-Built Cat Attachments

Maximize your productivity with the right blade for your dozer application.

High strength, pressed rib construction.
Large Cat Track-Type Tractor bolt on cutting edges and bottom wear plates.
Optimized widths and capacities for excellent dozing and rolling characteristics.

• Increase your productivity with a Cat coal blade designed to retain load control and a large capacity for lighter materials. Featuring the characteristics of the S and U blades into one package for increased capacity while retaining excellent spreading characteristics of a straight blade. For unmatched durability in high wear applications the Semi-U blade feature:

Hardox 400 Liner plate and side plates
Additional reinforcements on the bottom of the blade

SPECIFICATIONS

Engine Model C27 Cat®
Gross Power 561.0kW752.0hp
Bore 137.2mm5.4in
Stroke 152.4mm6.0in
Displacement 27.03l1649.5in³
Torque Rise 18.0%18.0%
Net Power - SAE J1349 - Standard Ambient 521.0kW699.0hp
Net Power - SAE J1349 521.0kW699.0hp
Gross Power - ISO 14396 561.0kW752.0hp
Net Power - SAE J1349 - High Ambient 483.0kW648.0hp
Peak Torque - Speed 3557.0N·m2624.0lb/ft
Emissions U.S. EPA Tier 4 Final or Tier 2 Equivalent
Rated Speed 1800.0r/min1800.0r/min
Gross Power - SAE J1995 571.0kW766.0hp
Operating Weight 74883.0kg165089.0lb
Converter Drive - Forward 1 7.3km/h4.5mile/h
Converter Drive - Forward 2 13.3km/h8.3mile/h
Converter Drive - Forward 3 22.9km/h14.2mile/h
Converter Drive - Reverse 1 7.9km/h4.9mile/h
Converter Drive - Reverse 2 14.7km/h9.1mile/h
Converter Drive - Reverse 3 24.9km/h15.5mile/h
Direct Drive - Forward 2 13.7km/h8.5mile/h
Direct Drive - Forward 3 24.5km/h15.2mile/h
Direct Drive - Reverse 1 8.7km/h5.4mile/h
Direct Drive - Reverse 2 15.4km/h9.6mile/h
Direct Drive - Reverse 3 26.4km/h16.4mile/h
Transmission Type Cat Planetary Power Shift
Direct Drive - Forward 1 Lock-up disabled
Fuel Tank - Standard 1085.0l286.6gal (US)
Cooling System 208.0l54.9gal (US)
Crankcase 76.0l20.0gal (US)
Transmission 110.0l29.1gal (US)
Differential - Final Drives - Front 271.0l71.6gal (US)
Differential - Final Drives - Rear 261.0l68.9gal (US)
Hydraulic System - Implement and Hydraulic Fan 261.0l68.9gal (US)
Hydraulic System - Steering and Braking 132.0l34.9gal (US)
Cab - ROPS/FOPS (1) Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan.
Air Conditioning Standard air conditioning system contains environmentally friendly R134a refrigerant
ROPS ROPS meets SAE J11040 APR88, ISO 3471:2008 and ISO 3471:1994 criteria.
Cab - ROPS/FOPS (2) SAE J11040 APR88, ISO 3471:2008, ISO 3471:1994
FOPS FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria.
Brakes Meets ISO 3540:2011
Front Fixed
Rear Trunnion
Oscillation Angle 8.5°8.5°
Blade Capacity Range 15,9-30,7 m3 (20,7-40,2 yd.3)
Machine Sound Level (ISO 6395:2008) 115.0dB(A)115.0dB(A)
Operator Sound Level (ISO 6396:2008) 69.0dB(A)69.0dB(A)
Machine Sound Level (ISO 6395:2008) 113.0dB(A)113.0dB(A)
Operator Sound Level (ISO 6396:2008) 69.0dB(A)69.0dB(A)
Relief Valve Setting - Tilt Cylinders (Small Pump) 20150.0kPa2920.0psi
Output at 2,000 rpm and 6900 kPa (1,000 psi) 311.0l/min82.0gal/min
Cylinders, Double Acting - Lift, Bore and Stroke 133 mm × 1535 mm (5.25 in × 60.4 in)
Relief Valve Setting - Bulldozer (Large Pump) 18650.0kPa2700.0psi
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke 210 mm × 188 mm (8.25 in × 7.4 in)
Total Steering Angle 35.0°35.0°
Steering System - Circuit Pilot, load sensing
Minimum Turning Radius - Over Blade 10369.0mm34.0ft
Relief Valve Setting 31000.0kPa4500.0psi
Steering System - Pump Piston, variable displacement
Maximum Flow 357.0l/min94.3gal/min
Height - Top of Exhaust Pipe 5049.0mm16.6ft
Wheel Base 4600.0mm15.1ft
Length - With Blade on Ground 11120.0mm36.5ft
Centerline of Rear Axle to Edge of Bumper 3795.0mm12.5ft
Centerline of Front Axle to Hitch 2300.0mm7.5ft
Height - Top of ROPS 5240.0mm17.2ft
Ground Clearance 596.0mm2.0ft
Height - Top of Hood 3862.0mm12.7ft