160K motor grader

  • Engine Model Cat C7 ACERT
  • Bore 105 mm4.1 in
  • Stroke 127 mm5 in

OVERVIEW

The Cat® 160K Motor Grader is the machine you can count on when you need to get work done. Cat motor graders help you make the most of your investment by delivering maximum productivity and durability. The Cat C7 ACERT™ engine, direct-drive power shift transmission and load sensing hydraulics work together ensuring you have the power and precision you need when you need it.

SPECIFICATIONS

  • Engine Model Cat C7 ACERT
  • Bore 105 mm4.1 in
  • Stroke 127 mm5 in
  • Displacement 7.2 l439 in³
  • Note 1 Base weight calculated on standard machine configuration with 14.00-24 12PR (G-2) tires, SP Rims, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator.
  • Note 2 Typical operating weight calculated on standard machine configuration with HVAC ROPS Cab, 14.00-24 12PR (G-2) tires, MP rims, ripper, push plate, transmission guard, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator.
  • Note 3 Maximum torque measured at 1,000 rpm in gears 4-8.
  • Industry motor-graders
  • Overview The Cat® 160K Motor Grader is the machine you can count on when you need to get work done. Cat motor graders help you make the most of your investment by delivering maximum productivity and durability. The Cat C7 ACERT™ engine, direct-drive power shift transmission and load sensing hydraulics work together ensuring you have the power and precision you need when you need it.

EQUIPMENT

160K Standard Equipment

  • Electrical
    • Alternator, 115 ampere
    • Backup alarm, reversing lights
    • Batteries, maintenance free 750 CCA
    • Common fuse block
    • Electrical system, 24 volt
    • Horn, electric
    • Indication display
    • Lights, stop and tail
    • Motor, starting
    • Product Link ready
    • Working lights
  • Operator Environment
    • Accelerator
    • Control console, adjustable
    • Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)
    • Guard rails, operator station
    • Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)
    • Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)
    • Key start/stop switch
    • Meter, hour
    • Power steering, hydraulic
    • Seat, vinyl-covered static
    • Seat belt
    • Steering wheel, tilt, adjustable
    • Storage area, cooler/lunch box
    • Throttle, electronic control
  • Power Train
    • Air cleaner, dry type radial seal with service indicator and automatic dust ejector
    • Air to air after cooler (ATAAC)
    • Blower fan
    • Brakes, oil disc, four-wheel air actuated
    • Differential with lock/unlock
    • Eco mode
    • Engine idle shutdown
    • Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control - Emits equivalent to Tier 3/Stage IIIA
    • Fuel water separator
    • Muffler, under hood
    • Next gen filter design
    • Parking brake, multi-disc, sealed and oil cooled
    • Prescreener
    • Priming pump fuel, resiliently mounted
    • Sediment drain, fuel tank
    • Tandem drive
    • Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection
    • VHP (Variable Horse Power)
  • Other Standard Equipment
    • Blade Float
    • Bumper, rear
    • CD ROM Parts Book
    • Circle drive slip clutch
    • Cutting edges, 152 mm x 16 mm (6 in x 5/8 in) curved DH-2 steel
    • Doors, engine compartment
    • Drawbar, 6 shoe, replaceable nylon composite wear strips
    • End bits, 16 mm (5/8 in) DH-2 steel
    • Frame, articulated with safety lock
    • Fuel tank, 305 L (80.6 gal)
    • Ground level engine shutdown
    • Link bar, 7 position
    • Moldboard, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) blade with hydraulic sideshift and mechanical tip
    • Moldboard, 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in) blade with hydraulic sideshift and tip
    • SOS ports, engine, hydraulic, transmission and cooling
    • Toolbox with padlock
    • Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes
  • Antifreeze
    • Extended Life Coolant to -35 degrees Celcius (-30 degrees Fahrenheit)

160K Optional Equipment

  • Guards
    • Guard, transmission
  • Operator Environment
    • Air conditoiner with heater
    • Heater, cab
  • Cab/Canopy
    • Cab, ROPS
    • Cab, Non-ROPS
    • Canopy, ROPS
    • Seat, vinyl adjustable
    • Seat, cloth, contour
    • Fan, defroster, front window
    • Fan, defroster, rear window
    • Sun shade, rear
    • Wiper/washer, rear
    • Wipers, intermittent front
    • Mirrors, dual inside
    • Mirror, heated
    • Mirrors, outside mounted
    • Power port, 12V accessory
    • Radio, Bluetooth
    • Radio ready entertainment
    • Rear vision camera
    • Tachometer/speedometer
  • Ripper/Scarifier
    • Ripper/scarifier, rear mounted
    • Scarifier, mid mounted, V-Type
  • Lights
    • Bar mounted, low directional and headlights
    • Beacon light
    • Combination headlight
    • Cab and bar mounted, high, directional, headlights and work lights
    • Rear facing cab lights
  • Power Train
    • Autoshift
  • Other Attachments
    • Cross Slope Indicate
    • Product Link
    • Product Link Elite
    • Snow Wing Mounting, frame-ready
    • AccuGrade ARO
    • Dryer, air
    • Push plate, counterweight
    • Accumulator, blade lift
    • Battery, extreme duty (1,400 CCA)
    • Ether, starting aid
    • Heater, engine coolant, 220V
    • Circle Saver
    • Ripper tow package
  • Hydraulics
    • Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)
    • Hydraulic arrangements with one ormore additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing
  • Blades, Moldboards
    • Blade, 3658 mm x 610 mm x 22 mm (12' x 24" x 7/8") with hydraulic sideshift and tip and 5/8" end bits cutting edge 203 mm x 19 mm (8" x 3/4") - for use with 4.3 m (14') blade
    • End bits, overlay, reversible pair for use with 203 mm (8") cutting edges

360° INTERACTIVE

Exterior

Interior

RELATED PRODUCTS

120K - Motor-graders

120K

motor graders

  • Engine Model: Cat® C7 ACERT™
  • Bore: 105 mm4.1 in
  • Stroke: 127 mm5 in
Get a quote
12K - Motor-graders

12K

motor graders

  • Engine Model: Cat C7 ACERT
  • Bore: 105 mm4.1 in
  • Stroke: 127 mm5 in
Get a quote
140K - Motor-graders

140K

motor graders

  • Engine Model: Cat C7 ACERT
  • Bore: 105 mm4.1 in
  • Stroke: 127 mm5 in
Get a quote
160K - Motor-graders

160K

motor graders

  • Engine Model: Cat C7 ACERT
  • Bore: 105 mm4.1 in
  • Stroke: 127 mm5 in
Get a quote
12M - Motor-graders

12M

motor graders

  • Engine Model: Cat C7 ACERT™
  • Bore: 110 mm4.3 in
  • Stroke: 127 mm5 in
Get a quote
14M3 - Motor-graders

14M3

motor graders

  • Engine Model: Cat C13 ACERT VHP
  • Bore: 130 mm5.1 in
  • Stroke: 157 mm6.2 in
Get a quote
16M3 - Motor-graders

16M3

motor graders

  • Engine Model: Cat® C13 ACERT™ VHP
  • Bore: 130 mm5.1 in
  • Stroke: 157 mm6.2 in
Get a quote
18M3 - Motor-graders

18M3

motor graders

  • Engine Model: Cat® C13 ACERT™ VHP
  • Bore: 130 mm5.1 in
  • Stroke: 157 mm6.2 in
Get a quote
120 / 120 AWD - Motor-graders

120 / 120 AWD

motor graders

  • Engine Model: Cat 7.1
  • Bore: 105 mm4.1 in
  • Stroke: 135 mm5.3 in
Get a quote