US
METRIC
735
OVERVIEW
BENEFITS
-
UP TO 50% LESS OPERATOR INPUT
- A uniquely combined hoist and transmission lever allows for easy operation which suits a wide range of operator experience
-
IMPROVED OPERATOR COMFORT
- Quieter, more spacious cab with improved visibility helps operators work more productively throughout the day
-
22% REDUCTION IN UNLADEN WEIGHT
- Deliver more productivity while using less fuel in any size application
FEATURES AT A GLANCE
MAXIMIZE PERFORMANCE
- Every Tier 2/Stage II equivalent Cat engine is equipped with a combination of proven electronic, fuel, air and aftertreatment components.
- Proven electronic, fuel, air and aftertreament components for peak performance and longevity.
- Emissions control and improved fuel economy.
- Advanced MEUI-C injector platforms deliver increased injection pressures and more precise fuel rates. These durable injectors enhance responsiveness while controlling soot.
- Innovative air management optimizes airflow, power, efficiency and reliability.
- The Cat CX31 six-speed forward, single speed reverse transmission features Advanced Productivity Electronic Control Strategy (APECS) and Electronic Clutch Pressure Control (ECPC) which deliver smooth gear changes with improved acceleration and higher productivity.
- Large capacity torque converter, configured for off-highway applications, allows the higher engine power to be transmitted more efficiently to the lower power train.
- The engine compression brake improves retarding response and increases retarding power.
AUTOMATIC CONTROLS
- Advanced Automatic Traction Control (AATC) proactively applies inter- and cross-axle differential locks ‘on-the-go.’ Operators are freed from this function to concentrate on driving/loading/dumping. Sensors monitor the machine and wheel speeds, enabling instant response in high rolling resistance conditions. Operation is seamless and smooth, eliminating wheel slip for maximum traction and productivity.
- Clutches are automatically disengaged when ground conditions allow, maximizing efficiency when steering or when on uneven ground.
- AATC reduces tire and driveline abuse, eliminating lost machine efficiencies caused by improper manual operation of the differential clutches and reducing the tire wear.
- Automatic Retarder Control (ARC) automates the retarder for the operator. Like AATC, a number of machine operating aspects are monitored. If required, the engine compression brake is engaged automatically to control machine speed when descending a grade. The system can help towards eliminating engine overspeed, improving safe machine operation and reducing cycle times, yet still having the flexibility of manual control if needed.
- New Assisted Hoisting Control automates the dumping function. Flick the new body raise/lower switch and the machine will apply the service brakes, switch the transmission to neutral and raise the body at the required engine rpm. Lowering the dump body is done the same way, flick the switch and the machine will lower the body and place it in float.
- Hill Assist reduces potential ‘roll-back’ on grades. If an operator stops the machine on a grade, when taking his foot off the service brake pedal, the machine will automatically hold the service brakes to prevent machine rolling backwards.
- The Waiting brake applies the service brakes when neutral gear is selected, allowing quick and easy control of the machine at the load or dump area.
HEAVY DUTY CONSTRUCTION
- All three axles promote stability using oscillating a-frames with lateral tie rods. Operate at productive speeds with confidence while virtually eliminating impact loads on truck components.
- The front suspension oscillates ±6° controlled by large-bore, low-pressure cylinders to assist in a smooth ride.
- The rear suspension features a walking beam and long-life suspension mounts optimizing ride and load retention.
- New fully enclosed wet disc brake systems inside of axles keeps contaminants out extending machine life and ensuring uptime.
OPERATOR COMFORT AND CONTROL
- Spacious cab delivers comfort all shift long and is 7dB quieter than prior model.
- Unique combination hoist/transmission lever is intuitive and enhances cycle times with fewer control movements.
- Trainer/passenger seat is fully padded with wide, retractable seat belt for security and comfort.
- New large side storage box is heated/cooled by the HVAC system.
- Air-suspension seat offers greater comfort, with a greater range of adjustments. Fore/aft isolation dramatically reduces vibrations and jolts. Every operator will find a adjustments to ensure comfort and control all shift long.
- Standard cooling/heating system ensures comfort in all conditions.
- Optional four-point seat belt is available to help operator stay in position and comfortable in rugged terrain.
- Integrated, wrap-around dash means all gauges and controls are easy to monitor and access. Automotive feel with Caterpillar's renowned industrial strength.
- Color display panel provides performance and condition pages, and includes video feed from the rearview camera and machine payload (when fitted).
- Optional Bluetooth™ entertainment system allows operator to stay in hands-free phone contact.
BUILT TO PERFORM
- Box section front frame absorb is stiff to handle torque loads. Frame design decreases stress at the hitch and optimizes suspension geometry.
- Rear frame features twin-box construction minimizing stress points and enhancing service life.
- Front axle suspension provides excellent ride via a three-point oscillating design.
- Articulating/oscillating hitch provides steering control and keeps all wheels on the ground in the toughest terrain.
- Dump body design provides a large target area for consistent high-load carrying capacity increasing productivity. Diverging flow when dumping aids material flow out of the body maximizing productivity and avoiding carry-back.
- Output transfer gear distributes power to tractor and trailer for optimum traction. Wet clutch ensures longevity.
- Dual-circuit, all-wheel braking system uses full-power hydraulic system actuating enclosed, oil immersed, multi-disc brakes. Independent front and rear circuits and accumulators deliver smooth control.
- Center axle parking brake is elevated away from damage. Spring applied with hydraulic release.
TECHNOLOGY THAT GETS WORK DONE
- Cat Product Link wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performing. The system tracks location, hours, fuel usage, productivity, idle time, and diagnostic codes through the online VisionLink user interface so you can make timely, fact-based decisions to maximize efficiency, improve productivity, and lower costs.
- Cat Production Measurement brings payload weighing to the cab to help optimize job site efficiency and productivity. Operators can view real-time load weights on the integrated display and know precisely when target is achieved, while cab-mounted external payload lights on all four corners signal the loader operator when to stop, reducing the risk of machine overloading. Operators can track daily productivity from the cab, with quick access to truck payload weights, loads and cycle counts, and daily totals; or remotely via LINK technologies.
- Cat Detect with Stability Assist warns the operator if machine is approaching a pre-set angle during operation; when driving and tipping. If using the assisted hoist, the machine will stop hoisting the body and give an audible and visual warning. The system monitors angles of tractor, trailer and grade independently. This increases operator awareness of machine stability during operation. All tractor and/or trailer rollover events are logged and reported via VisionLink.
BECAUSE UPTIME COUNTS
- Caterpillar design, manufacturing and customer service help ensure peak performance and uptime.
- Long service intervals keep your machine operating.
- Lubrication points are grouped near the hitch for fast, easy routine maintenance.
- Universal joints are sealed and lubed for long life.
- Optional Autolube system saves time and includes alerts via Product Link for low levels and fault codes.
- Radiator package is located behind the cab for protection and uses extended-life coolant to stretch change intervals.
- Electrical Service Center is located inside the cab and provides a power port, diagnostic connector and Cat Data Link connector for use with Electronic Technician (ET) software-equipped laptop computer.
- Easy access to transmission, drive shafts, hydraulic pumps and electrical and hydraulic interfaces provided with tilt-to-side cab and access panel.
- Service points are conveniently located on the left side of the engine, under the electrically raised hood.
- Complete Customer Support is the goal of your Cat dealership. From counsel of product selection, operating costs, operation, maintenance all the way to help with decisions on when and whether to replace or rebuild, your dealer is with you all the way
MORE SUSTAINABLE FUTURE
- Caterpillar designs and functions with great concern for the environment.
- Cat C13 engine incorporates the Cat Clean Emission Module (CEM) to meet Tier 4 Final/Stage IV emission standards. The system uses both Ultra-low-sulfur diesel (ULSD) fuel or up to B20 bio-diesel blended with ULSD.
- All Cat C Series Articulated Trucks are designed for long lifecycles with machines using reman components and machine rebuilds to maximize use of every part, minimizing waste.
- Volume of both hydraulic and engine oil systems has be reduced meaning less waste when oils are replaced.
BUILT-IN SAFETY FEATURES
- Seat belt in use indicator (four-point seat belt available as an option)
- Operator presence detection (prevents gear engagement when operator is not seated)
- Additional mirror for front of machine visibility
- Cab mounted, wide angled, folding mirrors
- Heated mirrors (optional)
- Body raised visual indicator
- Cab integral Roll Over Protection System (ROPS) and Falling Object Protection System (FOPS)
- Electro-hydraulic secondary steering system automatically activates in forward/reverse or when stationary if low pressure is sensed and can be manually selected for machine recovery purposes
- Extensive handrails
- External electrical system disconnect switch for easy access from outside of the machine
- Fire extinguisher in-cab mounting point
- Fully raised body locking pin
- Ground level external engine fuel cut-off switch provides easy access outside of the machine
- In-cab emergency brake switch (tertiary)
- Internal and external grab handles
- LED-flashing beacon (optional)
- Maximum speed limiter
- Multiple camera compatible
- New access lights
- Rearview camera system is fitted as standard
- Reversing indicator
- Slip resistant walkways – punched steel plate
- The parking brake functions are spring applied and hydraulic released
- Cat Detect with Stability Assist
SPECIFICATIONS
- Engine Model Cat® C13
- Bore 130mm
- Stroke 157mm
- Displacement 12.5l
- Net Power - ISO 14396 301kW
- Peak Engine Torque Gross (SAE J1995) 2192N·m
- Net Power - SAE J1349 298kW
- No Engine De-rating Below 3810m
- Gross Power - SAE J1995 306kW
- Peak Engine Torque Speed 1200r/min
- Rated Payload 32t
- Heaped (SAE 2:1) 20m³
- Struck 15.5m³
- Tailgate Heaped SAE 2:1 21.3m³
- Tailgate Struck 16.3m³
- Forward - 1 8km/h
- Forward - 2 15km/h
- Forward - 3 23km/h
- Forward - 4 35km/h
- Forward - 5 48km/h
- Forward - 6 57km/h
- Reverse - 1 9km/h
- Interior Cab 72dB(A)
- Rear Axle - Loaded 18800kg
- Rear Axle - Rated Load 13950kg
- Rear Axle - Empty 4850kg
- Front Axle - Rated Load 4100kg
- Center Axle - Empty 5070kg
- Total - Empty 24880kg
- Front Axle - Loaded 19060kg
- Center Axle - Loaded 19020kg
- Total - Loaded 56880kg
- Center Axle - Rated Load 13950kg
- Total - Rated Load 32000kg
- Front Axle - Empty 14960kg
- Fuel Tank 412l
- Cooling System 83l
- Hydraulic System 110l
- Engine Crankcase 38l
- Transmission 56l
- Final Drives/Differential 125l
- Output Transfer Gear Box 25l
- Raise Time 12s
- Lower Time 11s
- Lock to Lock 4.75 seconds @ 60 rpm
- Brakes ISO 3450 – 2011
- Cab - FOPS ISO 3449 Level II – 2005
- Cab - ROPS ISO 3471 – 2008
- Steering ISO 5010 – 2007
- Type High strength Brinell HB450 wear resistant steel
- Turning Dimensions - SAE Turning Radius 7470mm
- Turning Dimensions - Aisle Width 5393mm
- Turning Dimensions - Clearance Radius 8075mm
- Turning Dimensions - Steer Angle - Left/Right 45°
- Turning Dimensions - Inside Radius 3793mm
- Note Dimensions are for machines equipped with 750/65 R25 tires.
- Note (3) Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
- Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
- Note (1) The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
- Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
- Emissions The 735 meets either Tier 2/Stage II or Tier 3/Stage IIIA equivalent emission standards.
- Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
- Front Plate 7mm
- Engine Model - Either U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage IIIA equivalent Cat C13
- Note An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
- Base Plate 13mm
- Side Plates 11mm
- Peak Engine Torque Net (SAE J1349/ISO 9249) 2155N·m
- Wheel Loaders: 972M/972M XE - Passes 3–4
- Hydraulic Excavators: 349F/349F XE - Passes 4–5
- Wheel Loader: 950M - Passes 5
- Wheel Loaders: 966M/966M XE - Passes 4
- Wheel Loader: 962M - Passes 4–5
- Hydraulic Excavators: 336F/336F XE - Passes 5–6
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.