US
METRIC
MP332 Demolition Jaw
KEY SPECS
- Cycle Time - Open 1.9s
- Cycle Time - Close 1.3s
- Crushing Force - Primary Cutter 4094kN
OVERVIEW
FEATURES AT A GLANCE
Cycle Times are 50 Percent Faster
- New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
- You’ll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there’s no load.
- Maximum crushing/cutting force is applied as soon as the jaw contacts material.
Up to 19 Percent More Force
- Process more per hour, ship more per shift, make more every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
- Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
- Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.
Change Jaws in 15 Minutes
- Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
- Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
- MP332 accepts these jaw types:
- Concrete Cutter – outer jaw cracks concrete; inner shear jaw cuts steel
- Demolition – opens wide to crack the largest concrete structures
- Pulverizer – crushes concrete, separating the rebar
- Shear – cuts structural steel, pipe, and cable
- Tank Shear – cuts at right angle on three sides, cleanly cutting tanks or plate steel
- Universal – innovative design cuts steel and crushes concrete
Durable and Maintainable
- Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
- Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
- Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.
SPECIFICATIONS
- Cycle Time - Open 1.9s
- Cycle Time - Close 1.3s
- Crushing Force - Primary Cutter 4094kN
- Crushing Force - Cutter Tip 1951kN
- Crushing Force - Tooth Tip 1347kN
- Jaw Circuit - Max. Oil Pressure 5076psi
- Jaw Circuit - Max. Oil Flow 280l/min
- Rotation Circuit - Max. Oil Pressure 2321psi
- Rotation Circuit - Max. Oil Flow 11gal/min
- Jaw Depth 909mm
- Cutter Length 200mm
- Jaw Opening - Maximum 1078mm
- Jaw Width - Fixed 140mm
- Jaw Width - Moveable 140mm
- Length 2253mm
- Height 1995mm
- Width 1005mm
- Excavator Minimum 32 tons
- Excavator Maximum 50 tons
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
MP365 Demolition Jaw
Multi-Processors
- Cycle Time - Open2.1s
- Cycle Time - Close1.6s
- Crushing Force - Primary Cutter7298kN
MP345 Demolition Jaw
Multi-Processors
- Cycle Time - Open1.9s
- Cycle Time - Close1.4s
- Crushing Force - Primary Cutter5327kN
MP332 Demolition Jaw
Multi-Processors
- Cycle Time - Open1.9s
- Cycle Time - Close1.3s
- Crushing Force - Primary Cutter4094kN
MP324 Demolition Jaw
Multi-Processors
- Cycle Time - Open1.8s
- Cycle Time - Close1.2s
- Crushing Force - Primary Cutter3767kN
MP318 Demolition Jaw
Multi-Processors
- Cycle Time - Open1.6s
- Cycle Time - Close1s
- Crushing Force - Primary Cutter2687kN
MP332 Universal Jaw
Multi-Processors
- Cycle Time - Open1.6s
- Cycle Time - Close1.0s
- Crushing Force - Primary Cutter4743kN
MP324 Universal Jaw
Multi-Processors
- Cycle Time - Open1.6s
- Cycle Time - Close1.0s
- Crushing Force - Primary Cutter3646kN
MP318 Universal Jaw
Multi-Processors
- Cycle Time - Open1.6s
- Cycle Time - Close1.0s
- Crushing Force - Primary Cutter2661kN
MP332 Pulverizer Jaw
Multi-Processors
- Cycle Time - Open1.9s
- Cycle Time - Close1.3s
- Crushing Force - Primary Cutter4947kN
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
