US
METRIC
302.7 CR
KEY SPECS
- Net Power 17.6kW
- Engine Model C1.1 Turbo
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 17.6kW
OVERVIEW
BENEFITS
-
4 Industry First Features
- Cat Exclusives in a Mini Excavator
-
Up to 5% Lower Total Ownership Costs
- with more common parts, lower repair costs and tilt up cab
-
Up to 10% More Performance
- with programmable operator settings and faster cyle times
FEATURES AT A GLANCE
ALL DAY COMFORT
- Choose either a canopy or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A COMPACT DESIGN
- Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage let you access and work in the tightest areas. Dozer float allows for easy clean up.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab or canopy lets you reach additional service areas when needed.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
UNMATCHED DEALER SUPPORT
- Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.
SUSTAINABILITY
- The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
SPECIFICATIONS
- Net Power 17.6kW
- Engine Model C1.1 Turbo
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 17.6kW
- Bore 77mm
- Displacement 1.1l
- Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Stroke 81mm
- Gross Power - 2,400 rpm - SAE J1995:2014 18.4kW
- Operating Weight 3050kg
- Minimum Operating Weight with Canopy* 2560kg
- Maximum Operating Weight with Canopy** 2925kg
- Minimum Operating Weight with Cab* 2680kg
- EU: CE Plate Weight with Canopy*** 2695kg
- EU: CE Plate Weight with Cab*** 2800kg
- Note (2) **Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, blade, bucket and extra counterweight.
- Note (1) *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, blade, bucket and no extra counterweight.
- Maximum Operating Weight with Cab** 3050kg
- Note (3) ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
- Long Stick 15kg
- Steel Tracks 100kg
- Cab 125kg
- Counterweight (extra) 250kg
- Counterweight (light) 100kg
- Ground Pressure - Maximum Weight 29kPa
- Ground Pressure - Minimum Weight 24.2kPa
- Travel Speed - Low 2.6km/h
- Gradeability - Maximum 30 degrees
- Maximum Traction Force - High Speed 15.6kN
- Travel Speed - High 4.5km/h
- Maximum Traction Force - Low Speed 26.8kN
- Hydraulic System 35l
- Hydraulic Tank 18l
- Fuel Tank 45l
- Engine Oil 4l
- Cooling System 4l
- Digging Force - Stick - Standard 13.8kN
- Auxiliary Circuit - Primary - Pressure 245bar
- Operating Pressure - Swing 176bar
- Auxiliary Circuit - Secondary - Flow 25l/min
- Auxiliary Circuit - Primary - Flow 65l/min
- Auxiliary Circuit - Secondary - Pressure 245bar
- Operating Pressure - Equipment 245bar
- Digging Force - Stick - Long 12.3kN
- Digging Force - Bucket 23.3kN
- Operating Pressure - Travel 245bar
- Pump Flow at 2,400 rpm 100l/min
- Type Load Sensing Hydraulics with Variable Displacement Piston Pump
- Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
- Machine Swing Speed 9r/min
- Boom Swing - Left 75 Degrees
- Boom Swing - Right 50 Degrees
- Height 320mm
- Width 1570mm
- Top Guard ISO 10262:1998 (Level I)
- Tip Over Protective Structure (TOPS) ISO 12117:1997
- Roll Over Protective Structure (ROPS) ISO 12117-2:2008
- Operator Sound Pressure (ISO 6396:2008) 78dB(A)
- Average Exterior Sound Pressure (ISO 6395:2008) 94dB(A)
- Note European Union Directive “2000/14/EC”
- Overall Shipping Length* 4240mm
- Boom In Reach 1710mm
- O/A Shipping Height 2480mm
- Swing Bearing - Height 560mm
- Stick Length 1060mm
- Maximum Reach 4660mm
- Maximum Dump Clearance 2950mm
- Maximum Dig Height 4270mm
- Tail Swing without Counterweight 775mm
- Tail Swing with Extra Counterweight 890mm
- Boom Swing - Right 830mm
- O/A Undercarriage Length 2010mm
- Vertical Wall 1870mm
- Note *Overall Shipping Length depends on blade position during shipment.
- Maximum Reach - Ground Level 4510mm
- Dig Depth 2510mm
- Track Belt/Shoe Width 300mm
- Maximum Blade Height 395mm
- Maximum Blade Depth 515mm
- Boom Swing - Left 605mm
- Ground Clearance 310mm
- Boom Height - Shipping Position 1560mm
- Tail Swing - with Light Counterweight 845mm
- Dig Depth 2710mm
- Boom Height - Shipping Position 1650mm
- Boom Swing - Right 830mm
- Maximum Reach - Ground Level 4710mm
- Maximum Blade Height 395mm
- Maximum Reach 4850mm
- Boom Swing - Left 605mm
- Maximum Blade Depth 515mm
- O/A Shipping Height 2480mm
- Maximum Dig Height 4390mm
- Stick Length 1260mm
- Tail Swing without Counterweight 775mm
- Boom In Reach 1730mm
- Maximum Dump Clearance 3070mm
- Swing Bearing - Height 560mm
- Vertical Wall 2050mm
- O/A Undercarriage Length 2010mm
- Ground Clearance 310mm
- Track Belt/Shoe Width 300mm
- Overall Shipping Length* 4280mm
- Note *Overall Shipping Length depends on blade position during shipment.
- Tail Swing - with Extra Counterweight 890mm
- Track Width 1570mm
- Tail Swing - with Light Counterweight 845mm
- Recyclability 95%
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
302.7 CR
Excavators
- Net Power17.6kW
- Engine ModelC1.1 Turbo
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC17.6kW
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
