US
METRIC
D1
OVERVIEW
BENEFITS
-
Easy to Operate
- GRADE with 3D and Slope Assist™ help achieve the best quality grading results, while new technologies make machine operation easier and more efficient.
-
Up to 10% Lower Total Ownership Cost
- with improved fuel economy, long undercarriage life and easy maintenance.
-
Up to 15% More Performance
- with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.
FEATURES AT A GLANCE
IMPROVED VISIBILITY
- New sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.
GRADE TECHNOLOGY
-
Cat small dozers include a suite of Operator Assist features that work seemlessly to save time, effort, fuel, machine wear and overall costs. Cat Grade with Assist is an optional technology available for small dozers.
- Steer Assist automates track steering with light or heavy loads and automates blade tilt steering to help push heavy loads with less effort. This feature helps reduce operator inputs by up to 75% and enhances operator efficiency and productivity. Steer Assist is standard with Assist with Attachment Ready Option (ARO). Steer Assist 3D is standard with Grade 3D with Assist.
- Stable Blade Lift and Tilt automatically works behind the scenes to allow operators to create smooth surfaces with less effort using accelerometers on the blade and chassis with an advanced algorithm to make minor blade raise and lower movements. Stable Blade Lift and Tilt is standard with Assist with ARO and Grade 3D with Assist.
- Blade Load Monitor provides real-time feedback of current load vs. target load to fully utilize machine capacity benefiting operators of all skills levels. Automatically compensates for ground conditions. This feature is not available indoors or in areas where a GPS signal is not available. Blade Load Monitor is standard with Assist with ARO and Grade 3D with Assist.
- Low Slip Traction Control prevents excessive track slip to improve machine efficiency and reduce burden on the operator. Feature offers two modes: Normal Mode helps when pushing heavy blade loads by limiting non-productive track slip, recommended for most applications. And Low Slip Mode limits track slip for applications sensitive to slip such as spreading material on top of a liner, select this mode when needed. Traction Control is standard with Assist with ARO and Grade 3D with Assist.
- AutoCarry™ raises and lowers the blade to maximize pushing capability and prevent excessive track slip when pushing heavy loads. Feature is designed to work in unison with other Operator Assist Features. Not available indoors or in areas where a GPS signal is not available. AutoCarry is standard with Assist with ARO and Grade 3D with Assist.
- Scalable 2D and 3D Cat Grade is an optional feature that makes your job up to 39% faster with up to 82% fewer operator inputs and less rework by maintaining blade angles for better surface quality – even with less experienced operators.
- Cat Command remote control is an optional feature that takes you off the machine and away from hazardous conditions, dust, noise or vibration or operating on unstable surfaces. Eliminates risk of injury from climbing on or off the machine. Integrated with dozer systems, Cat Command enables smooth, precise control with access to all machine functions and advanced features (if equipped) for maximum efficiency and productivity. Availability varies by region.
UP TO 10% IMPROVED FUEL ECONOMY
- The D1 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacrifice when ECO mode is active.
COMFORTABLE WORK SPACE
- The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.
BIGGER, BETTER DISPLAY WITH CAMERA
- This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.
DURABLE UNDERCARRIAGE
- The D1 is available with either a Heavy Duty (HD) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.
SPECIFICATIONS
- Engine Model Cat C3.6
- Power - Net 59.7kW
- Displacement 3.6l
- Net Power - 2,200 rpm - SAE J1349 59.7kW
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 59.7kW
- Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
- Power Train Hydrostatic
- Note (2) Engine equivalent to Tier 3 emission standards.
- Operating Weight 8099kg
- Operating Weight - LGP 8545kg
- Operating Weight - LGP, 762 mm/30 in 8752kg
- Note (2) For machine with ripper, add 554 kg (1,222 lb).
- Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
- FOPS ISO 3449:2005 Level II
- ROPS ISO 3471:2008
- Drive Pumps 1
- Maximum Travel Speed - Reverse 10km/h
- Relief Valve Settings 48500kPa
- Maximum Travel Speed - Forward 9km/h
- Track Motors 2
- Track Gauge 1495mm
- Length - Track on Ground - LGP, 762 mm (30 in) 2248mm
- Shoe Width - Standard 406mm
- Ground Pressure - LGP, 762 mm (30 in) 25.5kPa
- Track Gauge - LGP, 762 mm (30 in) 1860mm
- Length - Track on Ground - LGP 2248mm
- Number of Rollers - Each Side 6
- Shoe Width - LGP, 762 mm (30 in) 762mm
- Track Gauge - LGP 1725mm
- Ground Pressure - LGP 29.9kPa
- Shoe Width - LGP 635mm
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43
- Length of Track on Ground 2248mm
- Ground Pressure 44.5kPa
- Number of Shoes - Each Side - Abrasion Undercarriage 38
- Crankcase - With Filter 10.5l
- Fuel Tank 195l
- Cooling System 19l
- Final Drive - Each - LGP 10l
- Transmission - Hydraulic Tank 90l
- Final Drives - Each Side 10l
- Pump Output 65l/min
- Relief Valve Settings 20600kPa
- Type Parallelogram
- Number of Shanks 3
- Height 165mm
- Weight 554kg
- Overall Width 1710mm
- Maximum Reach - Ground Line 766mm
- Maximum Ground Clearance Under Tip 448mm
- Maximum Digging Depth 337.5mm
- Weight 610kg
- Winch Drive Hydrostatic
- Control Hydraulic
- Speed Variable
- Throat Clearance 171.5mm
- Overall Width 741mm
- Drum Capacity - Recommended Cable 113m
- Maximum Line Pull - Full Drum 11340kg
- Drum Capacity - Optional Cable 78m
- Rope Diameter - Recommended 16mm
- Winch Length 705mm
- Maximum Line Pull - Bare Drum 18144kg
- Maximum Line Speed - Bare Drum 40m/min
- Drum Width 274mm
- Drum Diameter 254mm
- Maximum Line Speed - Full Drum 63m/min
- Rope Diameter - Optional 19mm
- Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
- Track Gauge - LGP 1725mm
- Overall Length - With Blade - LGP 4262mm
- BLADE: Blade Width - LGP 3149mm
- BLADE: Blade Capacity (SAE) - LGP 1.99m³
- BLADE: Blade Width at Maximum Angle - LGP 2874mm
- Ground Clearance - LGP, 762 mm (30 in) 332mm
- BLADE: Digging Depth - LGP 583mm
- Track Gauge - LGP, 762 mm (30 in) 1860mm
- Overall Length - With Blade - LGP, 762 mm (30 in) 4262mm
- BLADE: Maximum Angle (either side) - LGP 25°
- BLADE: Maximum Tilt - LGP 438mm
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
- BLADE: Blade Height - LGP 860mm
- Ground Clearance - LGP 332mm
- BLADE: Blade Lift Height - LGP 730mm
- Overall Length - With Blade - Standard 4273mm
- BLADE: Maximum Tilt - Standard 368mm
- BLADE: Blade Capacity (SAE) - Standard 1.52m³
- BLADE: Blade Width - Standard 2646mm
- Track Gauge - Standard 1495mm
- Ground Clearance - Standard 332mm
- BLADE: Blade Width at Maximum Angle - Standard 2417mm
- BLADE: Digging Depth - Standard 589mm
- BLADE: Blade Height - Standard 910mm
- BLADE: Blade Lift Height - Standard 730mm
- BLADE: Maximum Angle (either side) - Standard 25°
- Note *Abrasion Undercarriage
- BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58°
- Dozer Height - LGP, 762 mm (30 in) 2765mm
- Width of Dozer (standard shoes, no blade) - LGP 2360mm
- Dozer Height - Standard 2765mm
- Dozer Height - LGP 2765mm
- Width of Dozer (standard shoes, no blade) - Standard 1900mm
- Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 2411mm
- Rope Diameter - Recommended 0.6in
- Weight 794kg
- Drum Capacity - Recommended Cable 84m
- Winch Drive Hydraulic
- Maximum Line Pull - Full Drum 9231kg
- Maximum Line Speed - Bare Drum 15m/min
- Rope Diameter - Optional 19mm
- Maximum Line Speed - Full Drum 24m/min
- Maximum Line Pull - Bare Drum 14583kg
- Speed Variable
- Control Hydraulic
- Drum Capacity - Optional Cable 59m
- Drum Diameter 203.2mm
- Winch Length 35.63in
- Drum Width 9.65in
- Overall width 709mm
- Throat Clearance 141.4mm
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
D8R
Dozers
- Engine ModelCat 3406C DITA
- Power - Net226kW
- Net Power (Rated) - 2,100 rpm - ISO 9249/SAE J1349226kW
D11
Dozers
- Engine ModelCat® C32
- Engine Power - Net SAE J1349/ISO 9249 - Forward634kW
- Displacement32.1l
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
