US
METRIC
D6K
KEY SPECS
- Engine Model C7.1 ACERT
- Flywheel Power 97kW
- Emissions China Nonroad Stage III and equivalent to U.S. EPA Tier 3/EU Stage IIIA emission standards
OVERVIEW
FEATURES AT A GLANCE
Performance
- Cat C7.1 ACERT™ engine gives you reliable power and best-in-class fuel efficiency.
- Optimized undercarriage – eight (8) bottom rollers and two (2) carrier rollers for smoother ride and excellent finish grading performance.
- Wide blade helps get more work done in fewer passes.
- Optional Traction Control reduces track slip in poor underfoot or muddy conditions.
- Variable Pitch Angle Tilt (VPAT) blade for more versatility, simpler adjustment.
Efficiency
- Eco Modes optimize engine rpm while maintaining ground speed, saving up to 18 percent fuel in lighter blade load applications like finish grading.
- Auto Engine Speed Control reduces engine speed when idling for added fuel savings.
- Engine Idle Shutdown Timer shuts down machine after specified idle time to help save fuel and meet idling regulations.
Ease of Operation
- Intuitive, precise electro-hydraulic controls with sensitivity adjustment.
- New Liquid Crystal Display (LCD) places machine data, settings menus and more conveniently in front of the operator; Display for optional rear vision camera so no additional monitor is needed.
- Easy maintenance with grouped service and diagnostic points.
- Convenient ground level access to primary fuel filter/water separator.
- Easy to transport without blade removal.
- Foldable blade option.
Cat Connect Technology
- To boost your grading productivity, choose from a range of optional GRADE technology features that help you get more quality work done in less time.
- Automatically maintain established blade mainfall/cross slope with Cat GRADE with Slope Assist. Finish jobs faster, with better surface quality and significantly less operator effort. No external hardware or GPS signal required.
- Whether production dozing or finish grading, take on 3D design plans more efficiently with Cat GRADE with 3D.* Factory integrated grade control system features cab roof-mounted GNSS antennas to eliminate blade masts and cables.
- Cat Stable Blade works with electro-hydraulic controls to complement the operator's blade-control input to get better finish grades faster and with less effort.
- Cat Slope Indicate displays machine cross-slope and fore/aft orientation on the primary monitor, helping operators work more accurately on slopes.
- Versatile, scalable Cat AccuGrade™ is a dealer-installed grade control system. Choice of Laser, Global Navigation Satellite System (GNSS) or Universal Total Station (UTS) so you get the right level of accuracy to match your job requirements.
- Factory equip your dozer for easy installation of an AccuGrade system with the AccuGrade Ready Option (ARO).
- Manage your fleet more effectively and profitably with Product Link™**/VisionLink® remote monitoring.
**Product Link not available in all areas. Please consult your Cat dealer for details.
SPECIFICATIONS
- Engine Model C7.1 ACERT
- Flywheel Power 97kW
- Emissions China Nonroad Stage III and equivalent to U.S. EPA Tier 3/EU Stage IIIA emission standards
- Engine Power - 2,000 rpm - ISO 14396 117kW
- Net Power - 2,200 rpm - ISO 9249 97kW
- Engine Power - 2,000 rpm - ISO 14396 (DIN) 117kW
- Engine Power - 2,000 rpm - SAE J1995 (Gross) 119kW
- Net Power - 2,200 rpm - SAE J1349 95kW
- Fuel Tank 260l
- Cooling System 30l
- Operating Weight 14350kg
- Operating Weight - XL 13500kg
- Operating Weight - LGP 14350kg
- Note Weights with Heavy Duty Track
- LGP 3.81m³
- XL 3.26m³
- Note *ISO 9246
- Engine Crankcase 18l
- Hydraulic Tank 64l
- With the Following Attachment, Add to Basic Tractor Length: Ground Clearance from Ground Face of Shoe (per SAE J1234) 360mm
- XL 3196mm
- Ground Pressure (ISO 16754) 40kPa
- Width - Tractor - Standard Shoes - With VPAT Blade Angled 25° 2896mm
- Length - Track on Ground 2645mm
- Ground Pressure (ISO 16754) 31kPa
- Transmission Type Hydrostatic
- Length - Track on Ground 2645mm
- Length - Basic Tractor - With C-Frame and Drawbar 4618mm
- Machine Height - Grouser Tip - ROPS Cab 2965mm
- LGP 3682mm
- Width - Tractor - Standard Shoes - Without Blade 2330mm
- Width - Standard Track - Heavy Duty 760mm
- Width - Tractor - Standard Shoes - Without Blade 2760mm
- With the Following Attachment, Add to Basic Tractor Length: VPAT Blade, Straight 382mm
- Width - Tractor - Standard Shoes - With Foldable Blade in Transport Position 2850mm
- With the Following Attachment, Add to Basic Tractor Length: VPAT Blade, Angled 25° (Standard and Foldable) 1012mm
- With the Following Attachment, Add to Basic Tractor Length: VPAT Blade, Angled 25° (Standard and Foldable) 1012mm
- Final Drive - Each - XL/LGP 18.5l
- Length - Basic Tractor - With C-Frame and Drawbar 4618mm
- Machine Height - Grouser Tip - ROPS Cab 2965mm
- Width - Standard Track - Heavy Duty 560mm
- Reverse 0-10 km/h (0-6.2 mph)
- Note Dimensions with Heavy Duty Track
- Net Power - 2,200 rpm - ISO 9249 (DIN) 97kW
- Width - Tractor - Standard Shoes - With VPAT Blade Angled 25° 3337mm
- Width - Tractor - Standard Shoes - With Foldable Blade in Transport Position 2364mm
- With the Following Attachment, Add to Basic Tractor Length: VPAT Blade, Straight 382mm
- With the Following Attachment, Add to Basic Tractor Length: Ground Clearance from Ground Face of Shoe (per SAE J1234) 360mm
- Forward 0-10 km/h (0-6.2 mph)
- Note Dimensions with Heavy Duty Track
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
D3K2 Shiphold / Port Handling
Dozers
- Engine ModelCat C4.4
- Power - Net55.2kW
- Maximum Travel Speed - Reverse10km/h
D8R
Dozers
- Engine ModelCat 3406C DITA
- Power - Net226kW
- Net Power (Rated) - 2,100 rpm - ISO 9249/SAE J1349226kW
D11
Dozers
- Engine ModelCat® C32
- Engine Power - Net SAE J1349/ISO 9249 - Forward634kW
- Displacement32.1l
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
