US
METRIC
14
OVERVIEW
BENEFITS
-
Move more with less fuel
- Eco mode saves fuel while maintaining productivity.
-
Up To 78% Less Arm Movement
- Reduce fatigue from arm movement with joystick controls.
-
Integrated Technologies
- Using Cat® Grade technologies can increase your overall productivity with better accuracy, reduce rework, and lower costs.
FEATURES AT A GLANCE
TECHNOLOGY THAT GETS WORK DONE
- Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
- Optional Cat Grade with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
- Optional Cat Grade uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
- Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.
- Manage your fleet of machines while reducing fuel burn with Cat Production Measurement System option. The Efficiency Coach and Application Segmentation work together to monitor operators and machines at the same time. Measure your jobsite’s efficiency and productivity from anywhere on the website.
MOVE MORE, BURN LESS
- Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
- Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
- Standard VHP Plus provides ideal amount of power in all gears.
- Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.
MORE CONTROL AND EFFICIENCY
- Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.
- Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
- Balanced hydraulic flow is proportioned to ensure all implements will operate at the same time without slowing engine or speed of some implements.
DESIGNED FOR OPERATORS
- Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
- Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
- Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
- Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.
BUILT-IN SAFETY FEATURES
- Optional rear vision camera enhances sight to rear of machine.
- Electrical disconnect and engine shutoff switches are ground level.
- Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
- Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
- Optional seat belt indicator promotes safe operating habits.
SAVE MAINTENANCE TIME
- Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
- Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
SPECIFICATIONS
- Base Power (1st Gear) - Net 178kW
- Engine Model Cat C13
- Bore 130mm
- Stroke 157mm
- Speed at Rated Power 1,850 rpm
- Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
- Standard Capability 50°C
- Note (2) Optimized VHP Plus is standard for the 14M3.
- Torque Rise 41%
- Maximum Altitude - Full Power 4237m
- Maximum Torque - VHP Plus 1542N·m
- Emissions Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
- Maximum Altitude - Full Power (Tier 3) 4374m
- Maximum Altitude - Full Power (Tier 2) 3672m
- Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
- Standard - Fan Speed - Minimum 550 rpm
- Note (4) Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
- Displacement 12.5l
- Number of Cylinders 6
- Operating Weight - Typically Equipped 25968kg
- Blade Width 4.3m
- Circle - Outer Diameter 1822mm
- Front Axle - Wheel Lean - Left/Right 17.1°
- Front Axle - Total Oscillation per Side 32°
- Transmission and Differential 89l
- Diesel Exhaust Fluid Tank (Tier 4 Only) 22l
- Hydraulic System 125l
- Circle Drive 7l
- Cooling System 60l
- Fuel Tank 416l
- Arc Radius 413mm
- Throat Clearance 117mm
- Blade Width - With End Bits 4290mm
- Blade Height - With Cutting Edge 631mm
- Blade Width - Without End Bits 4166mm
- Blade Height - Without Cutting Edge 585mm
- Maximum Depth of Cut 593mm
- Circle Centershift - Left 650mm
- Maximum Lift Above Ground 419mm
- Circle Centershift - Right 520mm
- Blade Tip Range - Backward 5°
- Maximum Shoulder Reach Outside of Tires - Right 2004mm
- Moldboard Sideshift - Right 790mm
- Moldboard Sideshift - Left 740mm
- Maximum Shoulder Reach Outside of Tires - Left 1870mm
- Blade Tip Range - Forward 40°
- Gross Vehicle Weight - Base* - Total 23124kg
- Gross Vehicle Weight - Base* - Front Axle 6344kg
- Gross Vehicle Weight - Typically Equipped - Total 25968kg
- Gross Vehicle Weight - Typically Equipped - Rear Axle 19053kg
- Gross Vehicle Weight - Typically Equipped - Front Axle 6915kg
- Gross Vehicle Weight - Base* - Rear Axle 16780kg
- Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
- Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
- Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
- Standard - Fan Speed - Maximum 1,600 rpm
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
160 LVR
Motor Graders
- Base Power (1st Gear) - Net139kW
- Engine ModelCat C7
- Displacement7.2l
140 LVR
Motor Graders
- Base Power (1st Gear) - Net128kW
- Engine ModelCat C7
- Displacement7.2l
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
