KEY SPECS

Net Power 17.6kW23.6hp
Engine Model C1.1 Turbo
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 17.6kW23.6hp

ADD TO BASKET

FIND A DEALER

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

ALL DAY COMFORT

Choose either a canopy or a sealed and pressurized cab which can be equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information. An advanced touchscreen monitor can also be equipped.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls to move the machine and to operate the blade. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A COMPACT DESIGN

Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage let you access and work in the tightest areas. Dozer float allows for easy clean up.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab or canopy lets you reach additional service areas when needed.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.

UNMATCHED DEALER SUPPORT

Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.

SUSTAINABILITY

The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)

SPECIFICATIONS

Net Power 17.6kW23.6hp
Engine Model C1.1 Turbo
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 17.6kW23.6hp
Bore 77mm3in
Displacement 1.1l69in³
Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Stroke 81mm3.2in
Gross Power - 2,400 rpm - SAE J1995:2014 18.4kW24.7hp
Operating Weight 3050kg6725lb
Minimum Operating Weight with Canopy* 2560kg5645lb
Maximum Operating Weight with Canopy** 2925kg6450lb
Minimum Operating Weight with Cab* 2680kg5909lb
EU: CE Plate Weight with Canopy*** 2695kg5942lb
EU: CE Plate Weight with Cab*** 2800kg6174lb
Note (2) **Maximum Weight is based on steel tracks, operator, full fuel tank, long stick, blade, bucket and extra counterweight.
Note (1) *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, blade, bucket and no extra counterweight.
Maximum Operating Weight with Cab** 3050kg6725lb
Note (3) ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
Long Stick 15kg33lb
Steel Tracks 100kg221lb
Cab 125kg276lb
Counterweight (extra) 250kg551lb
Counterweight (light) 100kg221lb
Ground Pressure - Maximum Weight 29kPa4.2psi
Ground Pressure - Minimum Weight 24.2kPa3.5psi
Travel Speed - Low 2.6km/h1.6mile/h
Gradeability - Maximum 30 degrees
Maximum Traction Force - High Speed 15.6kN3507lbf
Travel Speed - High 4.5km/h2.8mile/h
Maximum Traction Force - Low Speed 26.8kN6025lbf
Hydraulic System 35l9.2gal (US)
Hydraulic Tank 18l4.8gal (US)
Fuel Tank 45l11.9gal (US)
Engine Oil 4l1.1gal (US)
Cooling System 4l1.1gal (US)
Digging Force - Stick - Standard 13.8kN3102lbf
Auxiliary Circuit - Primary - Pressure 245bar3553psi
Operating Pressure - Swing 176bar2553psi
Auxiliary Circuit - Secondary - Flow 25L/min7gpm
Auxiliary Circuit - Primary - Flow 65L/min17gpm
Auxiliary Circuit - Secondary - Pressure 245bar3553psi
Operating Pressure - Equipment 245bar3553psi
Digging Force - Stick - Long 12.3kN2765lbf
Digging Force - Bucket 23.3kN5238lbf
Operating Pressure - Travel 245bar3553psi
Pump Flow at 2,400 rpm 100L/min26gpm
Type Load Sensing Hydraulics with Variable Displacement Piston Pump
Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Machine Swing Speed 9r/min9r/min
Boom Swing - Left 75 Degrees
Boom Swing - Right 50 Degrees
Height 320mm12.6in
Width 1570mm61.8in
Top Guard ISO 10262:1998 (Level I)
Tip Over Protective Structure (TOPS) ISO 12117:1997
Roll Over Protective Structure (ROPS) ISO 12117-2:2008
Operator Sound Pressure (ISO 6396:2008) 78dB(A)78dB(A)
Average Exterior Sound Pressure (ISO 6395:2008) 94dB(A)94dB(A)
Note European Union Directive “2000/14/EC”
Overall Shipping Length* 4240mm166.9in
Boom In Reach 1710mm67.3in
O/A Shipping Height 2480mm97.6in
Swing Bearing - Height 560mm22in
Stick Length 1060mm41.7in
Maximum Reach 4660mm183.5in
Maximum Dump Clearance 2950mm116.1in
Maximum Dig Height 4270mm168.1in
Tail Swing without Counterweight 775mm30.5in
Tail Swing with Extra Counterweight 890mm35in
Boom Swing - Right 830mm32.7in
O/A Undercarriage Length 2010mm79.1in
Vertical Wall 1870mm73.6in
Note *Overall Shipping Length depends on blade position during shipment.
Maximum Reach - Ground Level 4510mm177.6in
Dig Depth 2510mm98.8in
Track Belt/Shoe Width 300mm11.8in
Maximum Blade Height 395mm15.6in
Maximum Blade Depth 515mm20.3in
Boom Swing - Left 605mm23.8in
Ground Clearance 310mm12.2in
Boom Height - Shipping Position 1560mm61.4in
Tail Swing - with Light Counterweight 845mm33.3in
Dig Depth 2710mm106.7in
Boom Height - Shipping Position 1650mm65in
Boom Swing - Right 830mm32.7in
Maximum Reach - Ground Level 4710mm185.4in
Maximum Blade Height 395mm15.6in
Maximum Reach 4850mm190.9in
Boom Swing - Left 605mm23.8in
Maximum Blade Depth 515mm20.3in
O/A Shipping Height 2480mm97.6in
Maximum Dig Height 4390mm172.8in
Stick Length 1260mm49.6in
Tail Swing without Counterweight 775mm30.5in
Boom In Reach 1730mm68.1in
Maximum Dump Clearance 3070mm120.9in
Swing Bearing - Height 560mm22in
Vertical Wall 2050mm80.7in
O/A Undercarriage Length 2010mm79.1in
Ground Clearance 310mm12.2in
Track Belt/Shoe Width 300mm11.8in
Overall Shipping Length* 4280mm168.5in
Note *Overall Shipping Length depends on blade position during shipment.
Tail Swing - with Extra Counterweight 890mm35in
Track Width 1570mm61.8in
Tail Swing - with Light Counterweight 845mm33.3in
Recyclability 95%