KEY SPECS

Net Power 15.7kW21hp
Engine Model C1.1
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 15.7kW21hp

ADD TO BASKET

FIND A DEALER

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

ALL DAY COMFORT

Adjustable wrist rests and a suspension seat option help keep you working comfortably all day long.

EASY TO OPERATE

Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.

STICK STEER TRAVEL MODE

Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!

BIG PERFORMANCE IN A COMPACT DESIGN

Strong lift and dig performance helps you get the job done faster. The retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.

SAFETY ON THE JOB SITE

Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we've built into the machine.

SIMPLE SERVICE FOR LESS DOWNTIME

Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up canopy lets you reach additional service areas when needed.

LOWER OPERATING COSTS

Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.

SUSTAINABILITY

The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)

SPECIFICATIONS

Net Power 15.7kW21hp
Engine Model C1.1
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 15.7kW21hp
Gross Power - ISO 14396 16.1kW21.6hp
Bore 77mm3in
Stroke 81mm3.2in
Displacement 1.1l69in³
Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (2) Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
Note (1) Engine power is tested per ISO 14396:2002.
Operating Weight 1775kg3913lb
Minimum Operating Weight with Canopy* 1580kg3483lb
Maximum Operating Weight with Canopy** 1775kg3913lb
EU: CE Plate Weight*** 1740kg3836lb
Note (1) *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank.
Note (2) **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
Note (3) ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
Long Stick 8kg18lb
Steel Tracks 57kg126lb
Expandable Undercarriage 129kg284lb
Travel Speed - High 4.4km/h2.7mile/h
Travel Speed - Low 2.9km/h1.8mile/h
Maximum Traction Force - High Speed 10.3kN2315.5lbf
Maximum Traction Force - Low Speed 16kN3597lbf
Ground Pressure - Minimum Weight 27.3kPa4psi
Ground Pressure - Maximum Weight 30.6kPa4.4psi
Gradeability - Maximum 30 degrees
Cooling System 3.9l1gal (US)
Engine Oil 4.4l1.2gal (US)
Fuel Tank 22l5.8gal (US)
Hydraulic Tank 18l4.8gal (US)
Hydraulic System 26l6.9gal (US)
Pump Flow at 2,400 rpm 66L/min17.4gpm
Operating Pressure - Equipment 213bar3089.3psi
Operating Pressure - Travel 213bar3089.3psi
Operating Pressure - Swing 103bar1493.9psi
Auxiliary Circuit - Primary - Flow 33L/min8.7gpm
Auxiliary Circuit - Primary - Pressure 213bar3089.3psi
Auxiliary Circuit - Secondary - Flow 14L/min3.7gpm
Auxiliary Circuit - Secondary - Pressure 213bar3089.3psi
Digging Force - Stick - Standard 8.2kN1843.4lbf
Digging Force - Stick - Long 7.2kN1616.4lbf
Digging Force - Bucket 14.1kN3169.8lbf
Type Load Sensing Hydraulics with Variable Displacement Piston Pump
Machine Swing Speed 9.8r/min9.8r/min
Width* 990mm39in
Height 225mm8.9in
Note *Expanded – 1300 mm (51 in)
Roll Over Protective Structure (ROPS) ISO 12117-2:2008
Tip Over Protective Structure (TOPS) ISO 12117:1997
Top Guard ISO 10262:1998 (Level I)
Dig Depth 2340mm92.1in
Vertical Wall 1800mm70.9in
Maximum Reach - Ground Level 3730mm146.9in
Maximum Reach 3800mm149.6in
Maximum Dig Height 3430mm135in
Maximum Dump Clearance 2450mm96.5in
Boom In Reach 1460mm57.5in
Tail Swing 820mm32.3in
Maximum Blade Height 275mm10.8in
Maximum Blade Depth 260mm10.2in
Boom Height - Shipping Position 1090mm42.9in
O/A Shipping Height 2310mm90.9in
Swing Bearing - Height 445mm17.5in
O/A Undercarriage Length 1460mm57.5in
Overall Shipping Length* 3620mm142.5in
Boom Swing - Right 50°50°
Boom Swing - Left 65°65°
Track Belt/Shoe Width 230mm9.1in
Track Width - Retracted 990mm39in
Track Width - Expanded 1300mm51.18in
Minimum Ground Clearance Below Undercarriage 155mm6.1in
Stick Length 960mm37.8in
Note *Overall Shipping Length depends on blade position during shipment.
Dig Depth 2540mm100in
Vertical Wall 1890mm74.4in
Maximum Reach - Ground Level 3890mm153.1in
Maximum Reach 3960mm155.9in
Maximum Dig Height 3490mm137.4in
Maximum Dump Clearance 2510mm98.8in
Boom In Reach 1450mm57.1in
Tail Swing 820mm32.3in
Maximum Blade Height 275mm10.8in
Maximum Blade Depth 260mm10.2in
Boom Height - Shipping Position 1040mm40.9in
O/A Shipping Height 2310mm90.9in
Swing Bearing - Height 445mm17.5in
O/A Undercarriage Length 1460mm57.5in
Overall Shipping Length* 3590mm141.3in
Boom Swing - Right 50°50°
Boom Swing - Left 65°65°
Track Belt/Shoe Width 230mm9.1in
Track Width - Retracted 990mm39in
Track Width - Expanded 1300mm51.18in
Minimum Ground Clearance Below Undercarriage 155mm6.1in
Stick Length 1160mm45.7in
Note *Overall Shipping Length depends on blade position during shipment.
Operator Sound Pressure (ISO 6396:2008) 72dB(A)72dB(A)
Note European Union Directive “2000/14/EC”
Recyclability 95%
Average Exterior Sound Pressure (ISO 6395:2008) 93dB(A)93dB(A)