Articulated trucks
-1.webp)
Dozers
-1-1.png)
Backhoe Loaders
Hydraulic Mining Shovels
ELECTRIC POWER
MARINE POWER SYSTEMS
INDUSTRIAL
OIL AND GAS
US
METRIC
336 GC
KEY SPECS
- Net Power - ISO 9249 195kW
- Engine Power - ISO 14396 195kW
- Engine Model Cat C7.1
OVERVIEW
BENEFITS
-
Up To 5% more fuel efficiency
- The 336 GC gets work done efficiently and reliably with balanced power and control.
-
New cab with more comfort and safety
- An adjustable seat, easy-to-reach controls, and ISO-certified ROPS protection make for a more pleasant, safer work environment.
-
Up To 20% lower maintenance costs
- Increase uptime and reduce costs with extended maintenance intervals.
FEATURES AT A GLANCE
MOVE MORE WITH LESS FUEL
- The excavator is 5 percent more fuel efficient than the 336D2 in similar applications.
- The C7.1 engine meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
- Match the excavator to the job with two power modes. Smart mode automatically matches engine and hydraulic power to digging conditions, providing max power when needed and reducing power when it isn’t to help save fuel.
- The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise digging requirements.
- Valve priority puts hydraulic pressure and flow where you command it to go for fast light- to medium-load cycle times.
- Advansys™ bucket tips increase penetration and improve cycle times.Tip changes can be done quickly with a simple lug wrench instead of a hammer or special tool, improving safety and uptime.
- Add auxiliary hydraulics to do more work with various Cat attachments.
- Product Link™ comes standard so you can remotely monitor machine health, location, hours, and fuel consumption on demand through the VisionLink® online interface.
High Performance
- Work up to 3300 m (10,830 ft) above sea level.
- Standard high-ambient temperature capability is 52° C (125° F) with cold start capability at –18° C (0° F).
- Automatic hydraulic oil warm up gets you to work faster in cold temperatures and helps prolong the life of components.
- Two levels of filtration protect the engine from dirty diesel fuel.
- Grease sealed between track pins and bushings reduces travel noise and prevents debris from entering to increase undercarriage life.
- The center track guiding guard helps keep the excavator track aligned when traveling and working on slopes.
- The sloped track frame prevents mud and debris accumulation, helping reduce risk of track damage.
Work in Comfort
- The Comfort cab has a wide seat that adjusts for operators of all sizes.
- Control the excavator comfortably with easy-to-reach controls all located in front of you.
- Standard automatic climate control keeps you at the right temperature all shift long.
- Advanced viscous mounts reduce cab vibration by up to 50 percent over previous excavator models.
- Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles.
- Use the standard radio’s USB ports and Bluetooth® technology to connect to personal devices.
Simple to Operate
- Start the engine with a push button; use a Bluetooth key fob, smartphone app, or Operator ID passcode.
- Program each joystick button, including power mode, response, and pattern, using Operator ID; the machine will remember what you set each time you go to work.
- Navigate quickly on the standard high-resolution 203 mm (8 inch) touchscreen monitor or with the aid of the jog dial control.
- Protect your hammer from overworking. Auto hammer stop warns you after 15 seconds of continuous firing and then automatically shuts it off after 30 seconds — all to prevent wear and tear on the attachment and excavator.
- Not sure how a function works or how to maintain the excavator? Always have the operator's manual at your fingertips in the touchscreen monitor.
- The Cat Locator is a Bluetooth device that makes finding your attachments and other gear quick and easy. The excavator's onboard Bluetooth reader or Cat App on your phone will locate the device automatically.
Easy Maintenance
- Expect up to 20 percent less maintenance cost than the 336F due to extended service intervals (savings calculated over 12,000 machine hours).
- Check hydraulic system oil and easily drain fuel system water and fuel tank water from ground level.
- Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
- Using Cat genuine oil and filters and doing your typical S∙O∙S monitoring will double the current service interval to 1,000 hours, giving you greater uptime to do more work.
- Oil and fuel filters are grouped and located on right-hand side of machine for easy maintenance.
- The new air intake filter with pre-cleaner has double the dust holding capacity of the previous air intake filter.
- The new hydraulic oil filter provides improved filtration performance, anti-drain valves to keep oil clean when the filter is replaced, and longer life with a 3,000 hour replacement interval – 50 percent longer than previous filter designs.
- S·O·S ports are on ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.
Safely Home Every Day
- Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the push button starting feature.
- The standard ROPS cab meets ISO 12117-2:2008 requirements.
- A travel direction indicator helps operators know which way to activate the travel levers.
- A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
- Enjoy great visibility into the trench, in each swing direction, and behind you with the help of smaller cab posts and larger windows.
- Serrated steps and anti-skid punch plate on the service platform help prevent slipping.
- A rearview camera is standard.
SPECIFICATIONS
- Net Power - ISO 9249 195kW
- Engine Power - ISO 14396 195kW
- Engine Model Cat C7.1
- Bore 105mm
- Stroke 135mm
- Displacement 7.1l
- Main System - Maximum Flow 559 l/min (148 gal/min)
- Maximum Pressure - Equipment 35000kPa
- Maximum Pressure - Travel 35000kPa
- Maximum Pressure - Swing 28000kPa
- Swing Speed 8.74r/min
- Maximum Swing Torque 137kN·m
- Operating Weight 33900kg
- Fuel Tank Capacity 600l
- Cooling System 19l
- Engine Oil 20l
- Swing Drive - Each 18l
- Final Drive - Each 8l
- Hydraulic System - Including Tank 373l
- Hydraulic Tank 161l
- Boom Reach 6.5 m (21'4")
- Stick Reach 3.2 m (10'6")
- Bucket HD 1.88 m³ (2.46 yd³)
- Shipping Height - Top of Cab 3170mm
- Handrail Height 3160mm
- Shipping Length 11170mm
- Tail Swing Radius 3530mm
- Counterweight Clearance 1250mm
- Ground Clearance 510mm
- Track Length 4590mm
- Track Length to Center of Rollers 3610mm
- Track Gauge 2590mm
- Transport Width 3190mm
- Maximum Digging Depth 7520mm
- Boom Reach 6.5 m (21'4")
- Stick Reach 3.2 m (10'6")
- Bucket HD 1.88 m³ (2.46 yd³)
- Maximum Reach at Ground Level 11050mm
- Maximum Cutting Height 10300mm
- Maximum Loading Height 7080mm
- Minimum Loading Height 2580mm
- Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 7360mm
- Maximum Vertical Wall Digging Depth 5660mm
- Bucket Digging Force - ISO 197kN
- Stick Digging Force - ISO 148kN
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
302.7 CR
Excavators
- Net Power17.6kW
- Engine ModelC1.1 Turbo
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC17.6kW
MEDIA GALLERY
