Articulated trucks
-1.webp)
Dozers
-1-1.png)
Backhoe Loaders
Hydraulic Mining Shovels
ELECTRIC POWER
MARINE POWER SYSTEMS
INDUSTRIAL
OIL AND GAS
US
METRIC
H190 S
KEY SPECS
- Blows per Minute 370 to 530
- Minimum Operating Weight 5200kg
- Rated Flow - Minimum 280l/min
OVERVIEW
FEATURES AT A GLANCE
High Performance
- Automatic shut off offers blank firing protection by stopping the piston when there is no material under the tool to help extend the life of the hammer.
- The internal buffering system helps reduce machine vibration and increase noise suppression.
- The standard silencing feature allows you to use a Performance hammer on job sites in noise-sensitive areas like neighborhoods or near hospitals where noise is regulated.
Increase Productivity
- Manually adjust the piston speed by choosing between high piston speed or maximum power to help increase efficiency and production on the job site.
- The oil-fired operating cycle helps provide full power during every blow and less waste heat.
- Critical hydraulic components are shielded from damage inside the housing, helping decrease downtime on the job site.
Easy to Maintain
- Standard on-board autolube provides continuous greasing as the hammer runs, eliminating the need for manual greasing.
- The slip-fit and 90-degree rotatable lower bushing allows for easy replacement in the field, helping reduce service time and extend service life.
- The oil-fired design eliminates the need to check gas charge.
- Quick and easy access to maintenance areas helps make hammer maintenance simple.
Boost Efficiency and Productivity with Integrated Technologies
- Never waste time looking for your attachments again. Cat asset tracking is available on all hammers.
- Track your entire fleet of attachments and machines from one source. Hammers with asset tracking can be viewed within VisionLink®.
- Keep your assets secure. Hammers with an asset tracker send an alert if they leave an easy-to-set up site boundary.
SPECIFICATIONS
- Blows per Minute 370 to 530
- Minimum Operating Weight 5200kg
- Rated Flow - Minimum 280l/min
- Rated Flow - Maximum 380l/min
- Minimum Operating Pressure 16000kPa
- Maximum Operating Pressure 17000kPa
- Tool Shaft Diameter 190mm
- Minimum Carrier Weight 43t
- Maximum Carrier Weight 80t
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
H65E Pin-on
Hammers
- Impact Energy Class1085J
- Blows per Minute720-1740
- Tool Shaft Diameter68mm
H55E Pin-on
Hammers
- Impact Energy Class813J
- Blows per Minute600-1680
- Tool Shaft Diameter58mm
B6
Hammers
- Operating Weight - With Tool259kg
- Energy Class680J
- Machine Class4-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
H140 GC
Hammers
- Impact Energy Class7500J
- Blows per Minute250 to 550
- Maximum Operating Weight3074kg
MEDIA GALLERY
