962L Wheel Loader

Equipment / NEW / Wheel Loaders / Medium Wheel Loaders / 962L

METRIC

962L

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

SPECIFICATIONS

PRODUCT BROCHURES AND DOWNLOADS

TOOLS AND EXPERT HELP

MEDIA GALLERY

KEY SPECS

Net Power - ISO 9249 185kW252hp
Engine Model Cat C7.1
Displacement 7l427in³

FIND A DEALER

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

RELIABILITY YOU CAN COUNT ON

Cat® C7.1 engine offers a combination of proven electronic, fuel, and air systems.
Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.

LONG TERM VALUE AND DURABILITY

Tough countershaft powershift transmission and axles handle extreme applications effectively.
Improved hydraulic hose routing reduces potential hose wear.
Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.

BUILT TO PERFORM

Engine power increased by approximately 10% improves machine performance and response (compared to H Series).
Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
High capacity torque converter results in greater digging efficiency.
Z-bar linkage provides high breakout force at ground level.
Optional high lift linkage offers increased hinge pin height to load more easily in a variety of applications.
Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
Optional fully automatic traction control system (differential locks) improves performance in the pile and poor underfoot conditions.

DO MORE WITH LESS FUEL

Up to 10% lower fuel consumption than H Series.*
Power dense engine burns less fuel by providing power and torque when needed.
Performance Series Buckets feature a longer floor that easily digs through the pile resulting in lower fuel consumption.
Load sensing hydraulics result in proportional flow for implement and steering on demand.
Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.

* Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

DESIGNED FOR OPERATORS

New best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
Intuitive, ergonomic controls keep operators focused on their work.
Optional new ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.

ENSURING A SAFE JOB SITE

Excellent cab access with wide door and stair-like steps.
Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.
Robust, repositioned grab bars provide safe access to machine platforms.

SAVE ON SERVICE AND MAINTENANCE

One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
Safe ground level access to fuel fill, oil fill, filters and daily maintenance points means less servicing time required.
Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.

TECHNOLOGY THAT GETS WORK DONE

Monitor, manage and enhance job site operations.
Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increases operator awareness of the working environment which enhances site safety.
Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.

SPECIFICATIONS

Net Power - ISO 9249 185kW252hp
Engine Model Cat C7.1
Displacement 7l427in³
Maximum Net Power - 2,000 rpm - ISO 9249 - Metric 185 kW (252 hp)
Peak Gross Torque - 1,400 rpm - ISO 14396 1050N·m774lb/ft
Maximum Gross Power - 2,000 rpm - ISO 14396 - Metric 195 kW (265 hp)
Operating Weight 19123kg42159lb
Bucket Capacities 2.7-4.4 m³ (3.5-5.8 yd³)
Breakout Force 146kN32822lbf
Static Tipping Load - Full 40° Turn - No Tire Deflection 12455kg27459lb
Static Tipping Load - Full 40° Turn - With Tire Deflection 11700kg25794lb
Forward - 1 6.9km/h4.3mile/h
Forward - 2 12km/h7.5mile/h
Forward - 3 19.3km/h12mile/h
Forward - 4 25.7km/h16mile/h
Reverse - 1 6.9km/h4.3mile/h
Reverse - 2 12km/h7.5mile/h
Reverse - 3 25.7km/h16mile/h
Implement System - Maximum Pump Output at 2,150 rpm 245l/min64.7gal/min
Implement System - Maximum Operating Pressure 27900kPa4047psi
Hydraulic Cycle Time - Total 9.5s9.5s
Implement Pump Type Variable Axial Piston
Cooling System 54l14.3gal (US)
Crankcase 20l5.3gal (US)
Transmission 43l11.4gal (US)
Hydraulic Tank 125l33gal (US)
Differential - Final Drives - Front 43l11.4gal (US)
Differential - Final Drives - Rear 43l11.4gal (US)
Fuel Tank 275l72.6gal (US)
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 72dB(A)72dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)*
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 107dB(A)107dB(A)
Centerline of Rear Axle to Hitch 1675mm5.5ft
Rack Back - Maximum Lift 66 degrees
Tread Width 2140mm7ft
Height - Top of Hood 2694mm8.83ft
Rack Back - Maximum Lift 60 degrees
Wheel Base 3350mm11ft
Rack Back at Ground 45 degrees
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm roll radius.
Height - Top of Exhaust Pipe 3412mm11.19ft
Maximum Net Torque - 1,400 rpm 984N·m726lb/ft
Tread Width 2140mm7ft
Centerline of Rear Axle to Edge of Counterweight 2147mm7.08ft
Hinge Pin Height at Maximum Lift 4487mm14.72ft
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Ground Clearance 365mm1.2ft
Maximum Width - Over Tires - Loaded 2824mm9.33ft
Forward - 5 39.5km/h24.5mile/h
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 69dB(A)69dB(A)
Hinge Pin Height at Maximum Lift 4182mm13.72ft
Overall Length - Without Bucket 7129mm23.39ft
Ground Clearance 365mm1.2ft
Note (2) **For machines in countries that adopt the EU Directives.
Height - Top of ROPS 3443mm11.33ft
Centerline of Rear Axle to Edge of Counterweight 2186mm7.17ft
Lift Arm Clearance at Maximum Lift 3791mm12.44ft
Maximum Width - Over Tires - Loaded 2824mm9.33ft
Height - Top of ROPS 3443mm11.33ft
Height - Top of Hood 2694mm8.83ft
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 104 LWA***
Note (1) For a machine configuration as defined under "Weight."
Note (1) *Distance of 15 m, moving forward in second gear ratio.
Overall Length - Without Bucket 7543mm24.75ft
Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.4 m3 general purpose bucket with BOCE.
Rack Back at Ground 40 degrees
Hinge Pin Height at Carry Height 762mm2.5ft
Centerline of Rear Axle to Hitch 1675mm5.5ft
Lift Arm Clearance at Maximum Lift 3624mm11.89ft
Wheel Base 3350mm11ft
Note (3) ***European Union Directive 2000/14/EC as amended by 2005/88/EC.
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Rack Back - Carry Height 49 degrees
Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Hinge Pin Height at Carry Height 642mm2.11ft
Rack Back - Carry Height 54 degrees
Height - Top of Exhaust Pipe 3412mm11.19ft
Bucket Range 2.7-4.4 m³ (3.5-5.8 yd³)