972L Wheel Loader

Equipment / NEW / Wheel Loaders / Medium Wheel Loaders / 972L

METRIC

972L

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

SPECIFICATIONS

PRODUCT BROCHURES AND DOWNLOADS

TOOLS AND EXPERT HELP

MEDIA GALLERY

KEY SPECS

Net Power - ISO 9249 222kW302hp
Emissions Tier 3/Stage IIIA
Displacement 9.3l568in³

FIND A DEALER

OVERVIEW

BENEFITS

FEATURES AT A GLANCE

RELIABILITY YOU CAN COUNT ON

Cat® C9.3 engine offers increased power density.
Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.

LONG TERM VALUE AND DURABILITY

Heavy-duty powershift transmission and axles handle extreme applications effectively.
Improved hydraulic hose routing reduces potential hose wear.
Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.

BUILT TO PERFORM

Engine power increased by approximately 5% improves machine performance and response (compared to H Series).
Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
High capacity torque converter results in greater digging efficiency.
Z-bar linkage provides high breakout force at ground level.
Optional high lift linkage offers increased hinge pin height to load more easily in a variety of applications.
Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
Optional fully automatic traction control system (differential locks) improves performance in the pile and poor underfoot conditions.
Optional Aggregate Handler configuration offers slightly higher payload capability for loose aggregate rehandling.*

* Optional configurations and equipment may vary from region to region and requires conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.

DO MORE WITH LESS FUEL

Up to 15% lower fuel consumption than H Series.*
Power dense engine burns less fuel by providing power and torque when needed.
Performance Series Buckets feature a longer floor that easily digs through the pile resulting in lower fuel consumption.
Load sensing hydraulics result in proportional flow for implement and steering on demand.
Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.

* Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.

DESIGNED FOR OPERATORS

New best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
Intuitive, ergonomic controls keep operators focused on their work.
Optional new ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.

SAFELY HOME EVERY DAY

Excellent cab access with wide door and stair-like steps.
Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.
Robust, repositioned grab bars provide safe access to the machine.

SAVE ON SERVICE AND MAINTENANCE

One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
Safe, ground level access to fuel fill and daily maintenance points means less servicing time is required.
Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.

TECHNOLOGY THAT GETS WORK DONE

Monitor, manage and enhance job site operations.
Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increases operator awareness of the working environment which enhances site safety.
Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.

SPECIFICATIONS

Net Power - ISO 9249 222kW302hp
Emissions Tier 3/Stage IIIA
Displacement 9.3l568in³
Maximum Gross Power - 1,800 rpm - ISO 14396 - Metric 242kW329hp
Engine Model Cat C9.3
Operating Weight 24897kg54871lb
Bucket Capacities 3.40-9.90 m³ (4.45-12.95 yd³)
Static Tipping Load - Full 37° Turn - No Tire Deflection 17421kg38396lb
Breakout Force 196kN44075lbf
Static Tipping Load - Full 37° Turn - With Tire Deflection 16164kg35626lb
Forward - 2 13.1km/h8.1mile/h
Forward - 4 39.5km/h24.5mile/h
Reverse - 2 15km/h9.3mile/h
Forward - 1 6.9km/h4.3mile/h
Reverse - 3 26.5km/h16.5mile/h
Reverse - 1 7.8km/h4.8mile/h
Forward - 3 23.2km/h14.4mile/h
Implement System - Maximum Operating Pressure 31000kPa4496psi
Hydraulic Cycle Time - Total 10.7s10.7s
Implement System - Maximum Pump Output at 2,200 rpm 360l/min95gal/min
Implement Pump Type Variable Displacement Piston
Transmission 58.5l15.5gal (US)
Cooling System 71.6l18.9gal (US)
Crankcase 24.5l6.5gal (US)
Fuel Tank 303l80gal (US)
Differential - Final Drives - Front 57l15.1gal (US)
Hydraulic Tank 125l33gal (US)
Differential - Final Drives - Rear 57l15.1gal (US)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 109dB(A)109dB(A)
Note (1) *Distance of 15 m, moving forward in second gear ratio.
Note (2) **For machines in countries that adopt the EU Directives.
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 76 dB(A)*
Hinge Pin Height at Carry 680mm2.25ft
Lift Arm Clearance at Maximum Lift 4140mm13.5ft
Ground Clearance 434mm1.42ft
Reverse - 4 39.5km/h24.5mile/h
Hinge Pin Height at Maximum Lift 4458mm14.67ft
Centerline of Rear Axle to Edge of Counterweight 2500mm8.17ft
Height - Top of Hood 2818mm9.25ft
Height - Top of ROPS 3587mm11.75ft
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 72dB(A)72dB(A)
Lift Arm Clearance at Maximum Lift 3843mm12.58ft
Note All dimensions are approximate and based on L3 XHA2 tires.
Hinge Pin Height at Maximum Lift 4793mm15.75ft
Tread Width 2230mm7.33ft
Note (1) For a machine configuration as defined under "Weight."
Note (3) ***European Union Directive 2000/14/EC as amended by 2005/88/EC.
Maximum Width over Tires 3009mm9.92ft
Hinge Pin Height at Carry 778mm2.58ft
Maximum Net Power - 1,700 rpm - ISO 9249 - Metric 222kW302hp
Height - Top of Exhaust Pipe 3522mm11.58ft
Maximum Net Torque - 1,100 rpm 1632N·m1204ft·lbf
Centerline of Rear Axle to Hitch 1775mm5.83ft
Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Height - Top of ROPS 3587mm11.75ft
Centerline of Rear Axle to Hitch 1775mm5.83ft
Rack Back - Carry Height 49 degrees
Rack Back - Maximum Lift 56 degrees
Centerline of Rear Axle to Edge of Counterweight 2500mm8.17ft
Overall Length - Without Bucket 8111mm26.61ft
Maximum Width over Tires 3009mm9.92ft
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 69dB(A)69dB(A)
Tread Width 2230mm7.33ft
Overall Length - Without Bucket 7773mm25.5ft
Ground Clearance 434mm1.42ft
Rack Back - Maximum Lift 71 degrees
Note All dimensions are approximate and based on L3 XHA2 tires.
Wheel Base 3550mm11.67ft
Height - Top of Exhaust Pipe 3522mm11.58ft
Rack Back - Carry Height 50 degrees
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 108 LWA***
Peak Gross Torque - 1,200 rpm - ISO 14396 1710N·m1261ft·lbf
Height - Top of Hood 2818mm9.25ft
Wheel Base 3550mm11.67ft
Rack Back at Ground 39 degrees
Rack Back at Ground 41 degrees
Note Weight based on a machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 4.8 m3 general purpose bucket with BOCE.
Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 826 mm roll radius.
Emissions Tier 3/Stage IIIA
Bucket Range 3.40-9.90 m³ (4.45-12.95 yd³)