Articulated trucks
-1.webp)
Dozers
-1-1.png)
Backhoe Loaders
Hydraulic Mining Shovels
ELECTRIC POWER
MARINE POWER SYSTEMS
INDUSTRIAL
OIL AND GAS
C4.4 ACERT
KEY SPECS
- Minimum Rating 58R ekW (50 Hz), 51R ekW (60 Hz)
- Maximum Rating 88R ekW (50 Hz), 105R ekW (60 Hz)
- Frequency 50 Hz or 60 Hz
OVERVIEW
FEATURES AT A GLANCE
Noise Reduction
New block for low noise and vibrations, Insulated timing case cover, Isolated oil pan (also provides ease of maintenance), Improved pump and gear train system, Stiffer crankshaft, Multiple fuel injection strategy, 4 valve cross flow head, Double curvature on thick walled crankcase, Piston optimized for high speed operation
Hydraulic Tappets
Hydraulic tappet adjustment removes the need for manual tappet adjustment, that on the 1006 (C6.6) needed to happen every 500 hours. This system is operated by oil pressure, and this saves the customers a considerable amount of cost from an Operating perspective.
Improved Smoke Levels
Improved smoke levels from C4.4 mechanical engine
Serpentine belts to achieve longer service intervals
These belts are more efficient, as they provide more drive surface. Less heating is created during running, and the belt will also last longer. The poly V belt cannot twist over like a single V belt, and any wear of the poly V belt becomes apparent a long time before failure.
Integrated Base Frame
Suitable for wide range of auxiliary accessories
Gear Driven water pumps
Lower servicing costs, reduced down time
Water-cooled turbo
Suitable for “gas tight” applications
Tailored Technology
Meets customer requirements in: voltage, cooling, twin pocket fly wheel housing, and factory options for starting
Caterpillar package
Fully packaged generator set
Advanced fuel and combustion system with 4 valves per cylinder
Lube System
Oil system holds 11L (2.8 gal), 500-hour oil change interval, Max continuous operation angle is 25⁰ (any direction), Max intermittent operation angle 30⁰ (any direction), Simplex and Duplex oil filters options available
Design Features
Control panel standard on LHS with single leg box, Control panel location interchangeable between 3 positions available as option
SPECIFICATIONS
- Minimum Rating 58R ekW (50 Hz), 51R ekW (60 Hz)
- Maximum Rating 88R ekW (50 Hz), 105R ekW (60 Hz)
- Frequency 50 Hz or 60 Hz
- Speed 1500 rpm or 1800 rpm
- Aspiration TA
- Bore 105.0mm
- Stroke 127.0mm
- Displacement 4.4l
- Governor Type Electronic
- Engine Model I-4, 4-Stroke-Cycle-Diesel
- Emissions/Fuel Strategy U.S. EPA Tier 3 / CCNR Stage 2
- Weight 2518-2844 lb (1142 - 1290 kg)
- Length 66.9-69.6 in (1699-1769 mm), 80.2R in (2037R mm)
- Width 37.6 inches (radiator - 38.8 inches)
- Height 49.0 inches (1245 mm)
- Excitation AREP
- Pitch 2/3
- Number of Leads 12-lead reconnectable
- Insulation Class H
- IP Rating IP23
- Voltage Regulator ±0.5%
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
MPP HUB
Marine Power Systems
- Propeller Diameter1200-8500 mm
- Shaft Power500-30000 kW
- Propeller MaterialBronze or Stainless Steel
MTA FP
Marine Power Systems
- Propeller Diameter1100-3400 mm
- Shaft Power500-3500 kW
- PitchFixed Pitch
MTA CP
Marine Power Systems
- Propeller Diameter1100-3400 mm
- Shaft Power500-3500 kW
- PitchControllable Pitch
MPC 800
Marine Power Systems
- Full Redundancy and Graphic DisplaysYes
- Load Control of Main EnginesYes
- Interface to DP systemsYes
MPC 500
Marine Power Systems
- Full Redundancy and Graphic DisplaysYes
- Load Control of Main EnginesYes
- Interface to DP systemsYes
MTT FP
Marine Power Systems
- Propeller Diameter1100-3200 mm
- Shaft Power200-3600 kW
- PitchFixed Pitch
MEDIA GALLERY