SPECIFICATIONS
- Engine Model Cat® 3516E
- Bore 170 mm6.7 in
- Stroke 215 mm8.5 in
- Displacement 78.1 l4766 in³
- Gross Power Sae J 1995 1394 kW1870 HP
- Forward 1 7.4 km/h4.6 mile/h
- Forward 2 12.9 km/h8 mile/h
- Forward 3 21.9 km/h13.6 mile/h
- Reverse 1 8.1 km/h5 mile/h
- Cooling System 520 l138 gal (US)
- Engine Crankcase 288 l76 gal (US)
- Transmission 416 l110 gal (US)
- Brakes ISO 3450:2011
- Note Travel speeds based on 58/85-57 tires.
- Emissions U.S. EPA Tier 4 Final/EU Stage IV* or U.S. EPA Tier 1/EU Stage I Equivalent
- Note 1 The power ratings apply when tested under the reference conditions for the specified standard.
- Note 2 The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and muffler.
- Note 3 The gross power advertised is with the fan at maximum speed.
- Reverse 2 14.1 km/h8.8 mile/h
- Front Fixed
- Wheel Base 6800 mm22.3 ft
- Gross Power Iso 14396 1377 kW1847 HP
- Industry large-wheel-loaders
EQUIPMENT
994K Standard Equipment
- ELECTRICAL
- Back-up alarm
- Alternator (225 amp)
- Dry batteries
- 10/15 amp, 24V to 12V converter
- Disconnect switch in bumper
- LED warning lights (pattern selectable)
- LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
- Emergency jump start receptacle
- Starter and transmission lockout in bumper
- Combined VIMS download and Cat Electronic Technician service port in bumper
- 24V starting and charging system
- Electric starters
- OPERATOR ENVIRONMENT
- Air conditioner
- Cab pressure indicator
- Cab is sound suppressed and pressurized with separate external rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
- Cat Vision (rear vision camera system)
- Coat hook
- Lift and tilt function controls
- Graphical touchscreen information display, conveys real time operating information and payload measurement
- Heater, defroster, auto temperature controls
- Electric (field and shop) horns
- Gauge instrumentation
– DEF Level, if equipped
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter - Warning/indicator instrumentation
– Low DEF Level, if equipped
– Three category action alert system
– Brake malfunction
– Bucket float status
– Delayed engine shutdown status
– Engine idle shutdown status
– Engine malfunction
– Fuel economy mode enable status
– Hydraulic lockout
– Lockup clutch enable status
– Low fuel level
– Parking brake status
– Quick shift enable status
– Rimpull control enable status
– Seat belt warning
– Secondary steering
– Throttle lock status
– Transmission gear
– Turn signal - Keypad control with indicator lights
– Fuel economy mode
– Implement kickouts
– Lockup clutch
– Manual lube
– Quickshift enable
– Rimpull control system
– Side rearview mirror heater
– Throttle lock
– Turn signals
– Hazard lights - Dome light in cab
- Lunchbox and beverage holders
- Rearview mirrors (externally mounted)
- Retractable seat belt, 76 mm (3 in) wide
- Cat Comfort (cloth), air suspension, six-way adjustable seat
- Trainer seat with lap belt, 76 mm (3 in) wide
- STIC system
- Sun screen, pull down (front and rear)
- Tinted glass
- VIMS with Information Display: external data port, Cycle Timer, integrated Cat Production Measurement
- Intermittent wet arm wipers/washers (front and rear)
- Service center
– Keypad, messenger, ET, VIMS, stairway lamp
- POWER TRAIN
- Oil cooled, multi-disc, service/secondary brakes
- Case drain filters
- Electro-hydraulic parking brake
- Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A) Air-to-Air After Cooling (ATAAC) diesel, turbocharged/aftercooled
- Engine prelube
- Fuel priming pump (electric)
- Ground level engine shutoff
- Engine air intake (above hood) precleaner
- Radiator, Aluminum Modular Radiator (AMR)
- Automatic, ether starting aid
- Electronic throttle lock
- Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch (LUC) and rimpull control system
- Planetary powershift, 3F/3R electronic control transmission
- OTHER
- Automatic bucket lift/tilt kickout/positioner
- Automatic lubrication system
- Cat O-ring face seal couplings
- Lockable service access doors
- Ecology drains
- Economy Mode
- High speed engine oil change system
- Front frame access with steps
- Front walkway around cab
- Ground level fast fill fuel system
- Transmission guard
- Drawbar hitch with pin
- Cat XT™ hoses
- Implement, steering and brake filtration/screening system
- Left side service center
- Oil sampling valves
- Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
- Pump bay access ladders with T-handle and platform
- Rear access to cab and service platform
- Load sensing steering
- Supplemental steering system
- Tie-offs on ROPS and radiator guards
- Toe kicks
- Vandalism protection caplocks
- Cooling cleanout service package
- Venturi stacks
994K Optional Equipment
- POWER TRAIN
- Oil Renewal System (ORS) (Not available on Tier 4 Final machines. Not available in all regions.)
- OPERATOR ENVIRONMENT
- AM/FM/CD/MP3 radio
- AM/FM/CD/MP3 radio with Bluetooth® and satellite ready
- MACHINE CONTROL AND GUIDANCE
- SPARE RIMS
- 1118 mm (44") spare rim
- 1194 mm (47") spare rim
- MISCELLANEOUS ATTACHMENTS
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
986H
large wheel loaders
- Engine Model: Cat® C15 ACERT™
- Bore: 137 mm5.4 in
- Stroke: 171.5 mm6.75 in
986H Block Handler Arrangement
large wheel loaders
- Engine Model: Cat® C15 ACERT™
- Bore: 137 mm5.4 in
- Stroke: 171.5 mm6.75 in
986K
large wheel loaders
- Engine Model: Cat® C15 ACERT™
- Bore: 137 mm5.4 in
- Stroke: 171.5 mm6.75 in
988H
large wheel loaders
- Engine Model: Cat® C18 ACERT®
- Bore: 145 mm5.7 in
- Stroke: 183 mm7.2 in
988H Millyard Arrangement
large wheel loaders
- Engine Model: Cat® C18 ACERT™
- Bore: 145 mm5.7 in
- Stroke: 183 mm7.2 in
988H Steel Mill Arrangement
large wheel loaders
- Engine Model: Cat® C18 ACERT™
- Bore: 145 mm5.7 in
- Stroke: 183 mm7.2 in
988K
large wheel loaders
- Engine Model: Cat® C18 ACERT™
- Bore: 145 mm5.7 in
- Stroke: 183 mm7.2 in
988K Millyard Arrangement
large wheel loaders
- Engine Model: Cat® C18 ACERT™
- Bore: 145 mm5.7 in
- Stroke: 183 mm7.2 in
988K Steel Mill Arrangement
large wheel loaders
- Engine Model: Cat® C18 ACERT™
- Bore: 145 mm5.7 in
- Stroke: 183 mm7.2 in
