US
METRIC
301.8
OVERVIEW
BENEFITS
-
4 Industry First Features
- Cat Exclusives in a Mini Excavator
-
Up to 15% Lower Total Ownership Costs
- with more common parts, lower repair costs and tilt up cab
-
Up to 20% More Performance
- with programmable operator settings and faster cyle times
FEATURES AT A GLANCE
ALL DAY COMFORT
- Choose either a canopy or a sealed and pressurized cab equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A COMPACT DESIGN
- Strong lift and dig performance helps you get the job done faster. The retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer blade float features allow for easy clean up.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt with optional seat belt reminder system are just a couple of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab lets you reach additional service areas when needed.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
SUSTAINABILITY
- The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
SPECIFICATIONS
- Net Power 15.7kW
- Operating Weight 2029kg
- Dig Depth 2570mm
- Engine Model C1.1
- Height 225mm
- Travel Speed - Low 2.9km/h
- Boom In Reach 1420mm
- Maximum Traction Force - High Speed 11.9kN
- Operating Pressure - Equipment 245bar
- Tip Over Protective Structure (TOPS) ISO 12117:1997
- Maximum Operating Weight with Cab** 2029kg
- Stick Length 1160mm
- Auxiliary Circuit - Secondary - Flow 14l/min
- Travel Speed - High 4.4km/h
- Roll Over Protective Structure (ROPS) ISO 12117-2:2008
- Maximum Reach - Ground Level 3800mm
- Maximum Blade Depth 265mm
- Digging Force - Bucket 19.6kN
- Ground Pressure - Maximum Weight 29.6kPa
- Vertical Wall 1940mm
- Cooling System 3.9l
- Stick Length 960mm
- Maximum Reach - Ground Level 3960mm
- Vertical Wall 1850mm
- Boom Height - Shipping Position 1070mm
- Track Width - Expanded 1300mm
- O/A Undercarriage Length 1590mm
- Minimum Operating Weight with Canopy* 1725kg
- Stroke 81mm
- O/A Shipping Height 2300mm
- Track Width - Expanded 1300mm
- Overall Shipping Length* 3720mm
- Maximum Blade Height 270mm
- Operator Sound Pressure (ISO 6396:2008) 73dB(A)
- Operating Pressure - Travel 245bar
- Digging Force - Stick - Long 9.8kN
- Maximum Blade Height 270mm
- Auxiliary Circuit - Secondary - Pressure 245bar
- Overall Shipping Length* 3710mm
- Boom Swing - Right 50°
- Note *Overall Shipping Length depends on blade position during shipment.
- Operating Pressure - Swing 147bar
- Auxiliary Circuit - Primary - Flow 33l/min
- Hydraulic Tank 18l
- Maximum Traction Force - Low Speed 18.4kN
- Pump Flow at 2,400 rpm 66l/min
- Tail Swing 995mm
- Width* 990mm
- Bore 77mm
- Type Load Sensing Hydraulics with Variable Displacement Piston Pump
- Minimum Ground Clearance Below Undercarriage 150mm
- Engine Oil 4.4l
- Track Width - Retracted 990mm
- Digging Force - Stick - Standard 11.3kN
- Note *Expanded – 1300 mm (51 in)
- Steel Tracks 50kg
- Maximum Reach 3870mm
- Maximum Blade Depth 265mm
- Note (2) Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
- Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Auxiliary Circuit - Primary - Pressure 245bar
- Average Exterior Sound Pressure (ISO 6395:2008) 93dB(A)
- Swing Bearing - Height 442mm
- Maximum Dig Height 3550mm
- Maximum Operating Weight with Canopy** 1905kg
- Boom In Reach 1420mm
- Fuel Tank 26l
- Track Belt/Shoe Width 230mm
- Maximum Dump Clearance 2640mm
- Hydraulic System 26l
- Tail Swing 995mm
- Machine Swing Speed 9.8r/min
- Boom Swing - Right 50°
- Maximum Reach 4030mm
- Displacement 1.1l
- Boom Swing - Left 65°
- Note (1) Engine power is tested per ISO 14396:2002.
- Ground Pressure - Minimum Weight 26.8kPa
- Boom Swing - Left 65°
- Maximum Dig Height 3620mm
- Track Width - Retracted 990mm
- Swing Bearing - Height 442mm
- Minimum Operating Weight with Cab* 1848kg
- Boom Height - Shipping Position 1020mm
- Minimum Ground Clearance Below Undercarriage 150mm
- O/A Undercarriage Length 1590mm
- Maximum Dump Clearance 2560mm
- Note *Overall Shipping Length depends on blade position during shipment.
- O/A Shipping Height 2300mm
- Gradeability - Maximum 30 degrees
- Note Net power is tested per ISO 9249:2007 and 80/1269/EEC.
- Note (2) **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
- Dig Depth 2370mm
- Top Guard ISO 10262:1998 (Level I)
- Note (1) *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank.
- Track Belt/Shoe Width 230mm
- Long Stick 8kg
- Note European Union Directive “2000/14/EC”
- Expandable Undercarriage 123kg
- Note (3) ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 15.7kW
- EU: CE Plate Weight with Cab*** 2000kg
- EU: CE Plate Weight with Canopy*** 1880kg
- Gross Power - SAE J1995:2014 16.1kW
- Recyclability 95%
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
302.7 CR
Excavators
- Net Power17.6kW
- Engine ModelC1.1 Turbo
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC17.6kW
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
