Articulated trucks
-1.webp)
Dozers
-1-1.png)
Backhoe Loaders
Hydraulic Mining Shovels
ELECTRIC POWER
MARINE POWER
INDUSTRIAL
OIL AND GAS
.png)
RENTALS
.png)
AFTERMARKET
US
METRIC
302 CR
KEY SPECS
- Net Power 15.7kW
- Engine Model C1.1
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 15.7kW
OVERVIEW
BENEFITS
-
4 Industry First Features
- Cat Exclusives in a Mini Excavator
-
Up to 15% Lower Total Ownership Costs
- with more common parts, lower repair costs and tilt up cab
-
Up to 20% More Performance
- with programmable operator settings and faster cyle times
FEATURES AT A GLANCE
ALL DAY COMFORT
- Choose either a canopy or a sealed and pressurized cab equipped with air conditioning, adjustable wrist rests, and a suspension seat option to help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A COMPACT DESIGN
- Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up cab lets you reach additional service areas when needed.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
SUSTAINABILITY
- The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
SPECIFICATIONS
- Net Power 15.7kW
- Engine Model C1.1
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 15.7kW
- Gross Power - SAE J1995:2014 16.1kW
- Bore 77mm
- Stroke 81mm
- Displacement 1.1l
- Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Note Advertised power is tested per the specified standard in effect at the time of manufacture.
- Note (1) Net power advertised is the power available at the flywheel when the engine is at the rated speed of 2,400 rpm and the engine is installed with the factory configured fan, air intake system, exhaust system and alternator with a minimum alternator load.
- Operating Weight 2262kg
- Minimum Operating Weight with Canopy* 1918kg
- Maximum Operating Weight with Canopy** 2081kg
- Minimum Operating Weight with Cab* 2057kW
- Maximum Operating Weight with Cab** 2262kg
- EU: CE Plate Weight with Canopy*** 2045kg
- EU: CE Plate Weight with Cab*** 2140kg
- Note (1) *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank.
- Note (2) **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
- Note (3) ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
- Long Stick 8kg
- Steel Tracks 60kg
- Expandable Undercarriage 96kg
- Travel Speed - High 4.4km/h
- Travel Speed - Low 2.9km/h
- Maximum Traction Force - High Speed 13.2kN
- Maximum Traction Force - Low Speed 20kN
- Ground Pressure - Minimum Weight 23.7kPa
- Ground Pressure - Maximum Weight 26.8kPa
- Gradeability - Maximum 30 degrees
- Cooling System 3.9l
- Engine Oil 4.4l
- Fuel Tank 26l
- Hydraulic Tank 18l
- Hydraulic System 26l
- Type Load Sensing Hydraulics with Variable Displacement Piston Pump
- Pump Flow at 2,400 rpm 66L/min
- Operating Pressure - Equipment 245bar
- Operating Pressure - Travel 245bar
- Operating Pressure - Swing 147bar
- Auxiliary Circuit - Primary - Flow 33L/min
- Auxiliary Circuit - Primary - Pressure 245bar
- Auxiliary Circuit - Secondary - Flow 14L/min
- Auxiliary Circuit - Secondary - Pressure 245bar
- Digging Force - Stick - Standard 11.3kN
- Digging Force - Stick - Long 9.8kN
- Digging Force - Bucket 19.6kN
- Machine Swing Speed 9.8r/min
- Width* 1090mm
- Height 225mm
- Note *Expanded – 1400 mm (55 in)
- Roll Over Protective Structure (ROPS) ISO 12117-2:2008
- Tip Over Protective Structure (TOPS) ISO 12117:1997
- Top Guard ISO 10262:1998 (Level I)
- Dig Depth 2370mm
- Vertical Wall 1850mm
- Maximum Reach - Ground Level 4040mm
- Maximum Reach 4110mm
- Maximum Dig Height 3550mm
- Maximum Dump Clearance 2560mm
- Boom In Reach 1660mm
- Tail Swing 750mm
- Maximum Blade Height 285mm
- Maximum Blade Depth 295mm
- Boom Height - Shipping Position 1070mm
- O/A Shipping Height 2300mm
- Swing Bearing - Height 442mm
- O/A Undercarriage Length 1850mm
- Overall Shipping Length* 3900mm
- Boom Swing - Right 50°
- Boom Swing - Left 65°
- Track Belt/Shoe Width 250mm
- Track Width - Retracted 1090mm
- Track Width - Expanded 1400mm
- Minimum Ground Clearance Below Undercarriage 150mm
- Stick Length 960mm
- Note *Overall Shipping Length depends on blade position during shipment.
- Dig Depth 2570mm
- Vertical Wall 1940mm
- Maximum Reach - Ground Level 4210mm
- Maximum Reach 4270mm
- Maximum Dig Height 3620mm
- Maximum Dump Clearance 2640mm
- Boom In Reach 1660mm
- Tail Swing 750mm
- Maximum Blade Height 285mm
- Maximum Blade Depth 295mm
- Boom Height - Shipping Position 1020mm
- O/A Shipping Height 2300mm
- Swing Bearing - Height 442mm
- O/A Undercarriage Length 1850mm
- Boom Swing - Right 50°
- Overall Shipping Length* 3880mm
- Boom Swing - Left 65°
- Track Belt/Shoe Width 250mm
- Track Width - Retracted 1090mm
- Track Width - Expanded 1400mm
- Minimum Ground Clearance Below Undercarriage 150mm
- Stick Length 1160mm
- Note *Overall Shipping Length depends on blade position during shipment.
- Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe) (Global Warming Potential = 1430). See label or instruction manual for gas refrigerant identification. The system contains 0.75 kg (1.65 lb), 0.90 kg (1.98 lb) or 1.0 kg (2.20 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons) for R134a and 0.001 tonnes (0.001 tons) for R1234yf (Europe).
- Operator Sound Pressure (ISO 6396:2008) 72dB(A)
- Average Exterior Sound Pressure (ISO 6395:2008) 99dB(A)
- Note European Union Directive “2000/14/EC”
- Recyclability 95%
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
303 CR
Excavators
- Net Power17.6kW
- Engine ModelC1.1 Turbo
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC17.6kW
303.5 CR
Excavators
- Net Power17.6kW
- Engine ModelC1.7
- Net Power @ 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/126917.6kW
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
