US
METRIC
301.5
OVERVIEW
BENEFITS
-
4 Industry First Features
- Cat Exclusives in a Mini Excavator
-
Up to 15% Lower Total Ownership Costs
- with more common parts, lower repair costs and tilt up cab
-
Up to 20% More Performance
- with programmable operator settings and faster cyle times
FEATURES AT A GLANCE
ALL DAY COMFORT
- Adjustable wrist rests and a suspension seat option help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A COMPACT DESIGN
- Strong lift and dig performance helps you get the job done faster. The retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt are just a couple of the safety features we've built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up canopy lets you reach additional service areas when needed.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.
SUSTAINABILITY
- The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
- Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
- Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
- The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
- Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
- Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
- Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
SPECIFICATIONS
- Net Power 15.7kW
- Operating Weight 1775kg
- Dig Depth 2540mm
- Engine Model C1.1
- Height 225mm
- Minimum Operating Weight with Canopy* 1580kg
- Swing Bearing - Height 445mm
- Displacement 1.1l
- Maximum Blade Height 275mm
- O/A Undercarriage Length 1460mm
- Stroke 81mm
- Pump Flow at 2,400 rpm 66l/min
- Maximum Traction Force - High Speed 10.3kN
- Maximum Reach - Ground Level 3730mm
- Roll Over Protective Structure (ROPS) ISO 12117-2:2008
- Stick Length 1160mm
- Digging Force - Stick - Long 7.2kN
- Boom Swing - Left 65°
- Maximum Reach 3800mm
- O/A Shipping Height 2310mm
- Operating Pressure - Swing 103bar
- Average Exterior Sound Pressure (ISO 6395:2008) 93dB(A)
- Maximum Blade Depth 260mm
- Boom Height - Shipping Position 1040mm
- Bore 77mm
- Minimum Ground Clearance Below Undercarriage 155mm
- Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Maximum Reach 3960mm
- Maximum Dig Height 3490mm
- Note *Overall Shipping Length depends on blade position during shipment.
- Tail Swing 820mm
- Vertical Wall 1800mm
- O/A Undercarriage Length 1460mm
- Ground Pressure - Minimum Weight 27.3kPa
- Dig Depth 2340mm
- Track Width - Expanded 1300mm
- Digging Force - Stick - Standard 8.2kN
- Boom In Reach 1450mm
- Track Width - Expanded 1300mm
- Auxiliary Circuit - Primary - Flow 33l/min
- Cooling System 3.9l
- O/A Shipping Height 2310mm
- Ground Pressure - Maximum Weight 30.6kPa
- Auxiliary Circuit - Secondary - Pressure 213bar
- Track Belt/Shoe Width 230mm
- Maximum Blade Depth 260mm
- Stick Length 960mm
- Maximum Reach - Ground Level 3890mm
- Maximum Dig Height 3430mm
- Engine Oil 4.4l
- Machine Swing Speed 9.8r/min
- Operating Pressure - Travel 213bar
- Note *Expanded – 1300 mm (51 in)
- Overall Shipping Length* 3620mm
- Width* 990mm
- Boom In Reach 1460mm
- Maximum Blade Height 275mm
- Overall Shipping Length* 3590mm
- Travel Speed - High 4.4km/h
- Note (1) *Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank.
- Maximum Dump Clearance 2450mm
- Note Net power is tested per ISO 9249:2007 and 80/1269/EEC.
- Maximum Dump Clearance 2510mm
- Long Stick 8kg
- Boom Swing - Right 50°
- Swing Bearing - Height 445mm
- Note *Overall Shipping Length depends on blade position during shipment.
- Note (2) Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.
- Minimum Ground Clearance Below Undercarriage 155mm
- Travel Speed - Low 2.9km/h
- Boom Swing - Left 65°
- Operating Pressure - Equipment 213bar
- Maximum Traction Force - Low Speed 16kN
- Hydraulic System 26l
- Vertical Wall 1890mm
- Hydraulic Tank 18l
- Track Width - Retracted 990mm
- Track Belt/Shoe Width 230mm
- Boom Height - Shipping Position 1090mm
- Auxiliary Circuit - Secondary - Flow 14l/min
- Tail Swing 820mm
- Tip Over Protective Structure (TOPS) ISO 12117:1997
- Top Guard ISO 10262:1998 (Level I)
- Maximum Operating Weight with Canopy** 1775kg
- Digging Force - Bucket 14.1kN
- Note European Union Directive “2000/14/EC”
- Steel Tracks 57kg
- Boom Swing - Right 50°
- Auxiliary Circuit - Primary - Pressure 213bar
- Track Width - Retracted 990mm
- Note (2) **Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
- Gradeability - Maximum 30 degrees
- Type Load Sensing Hydraulics with Variable Displacement Piston Pump
- Note (1) Engine power is tested per ISO 14396:2002.
- Fuel Tank 22l
- Expandable Undercarriage 129kg
- EU: CE Plate Weight*** 1740kg
- Note (3) ***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC 15.7kW
- Gross Power - SAE J1995:2014 16.1kW
- Recyclability 95%
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
302.7 CR
Excavators
- Net Power17.6kW
- Engine ModelC1.1 Turbo
- Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC17.6kW
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
