SPECIFICATIONS
- Engine Model Cat® C3.3B
- Bore 94 mm3.7 in
- Stroke 120 mm4.7 in
- Displacement 3.33 l203.2 in³
- Fuel Tank 125 l33 gal (US)
- Cooling System 14 l3.7 gal (US)
- Hydraulic System 94 l24.8 gal (US)
- Note Automatic swing break, spring applied, hydraulic release.
- Emissions Meets U.S. EPA Tier 4 Final and EU Stage IIIB emission standards.
- Note 1 Weight with rubber tracks, bucket, operator (75 kg/165 lb), full fuel and auxiliary lines.
- Note 2 Weight varies depending on machine configuration.
- Note 3 Straight line travel when tracking and operating the front linkage simultaneously.
- Gross Power Iso 14396 49.7 kW66.6 HP
- Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.3 kg (2.9 lb) of refrigerant which has a CO2 equivalent of 1.9 metric tonnes (4,189 lb).
- Hydraulic Tank 82 l21.7 gal (US)
- Industry mini-excavators
EQUIPMENT
308E2 CR Standard Equipment
- ENGINE
- Cat C3.3B diesel engine (meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards)
- Automatic engine idle
- Automatic engine shut-off
- Automatic two speed travel
- Diesel Particulate Filter (North America only)
- Diesel Oxidation Catalyst (North America only)
- Fuel and water separator
- Power on demand
- HYDRAULIC SYSTEM
- 1-way and 2-way (combined function)
- Accumulator
- Automatic swing parking brake
- Auxiliary hydraulic lines
- Adjustable auxiliary relief
- Auxiliary line quick disconnects
- Cat interlock system: hydraulic lockout
- Continuous auxiliary flow
- Ecology drain
- Hydraulic oil cooler
- High definition hydraulics
- Load sensing/flow sharing
- OPERATOR ENVIRONMENT
- 100% pilot control ergonomic joysticks
- Adjustable armrests
- Air conditioning/heat
- COMPASS: complete, operation, maintenance, performance and security system
- Cup holder
- High back suspension seat, heated
- Hydraulic neutral lockout bar
- Interior light
- Literature holder
- Pattern changer (optional in Europe)
- Radio (optional in Europe)
- Site reference system: leveling
- Tool storage area
- Travel control pedals with hand levers
- Washable floor mat
- Windshield wiper
- UNDERCARRIAGE
- Dozer blade with float function
- Track, rubber belt, 450 mm (18 in) width
- Tie down eyes on track frame
- Towing eye on base frame
- FRONT LINKAGE
- 180 degree bucket rotation
- Certified lifting eye on bucket linkage (optional in Europe)
- Front shovel capable
- Thumb ready stick
- ELECTRICAL
- 12 volt electrical system
- 60 ampere alternator
- 650 CCA maintenance free battery
- Fuse box
- Ignition key start/stop switch
- Slow blow fuse
- Warning horn
- LIGHTS AND MIRRORS
- Cab and boom light with time delay capability
- Mirror, rear view, cab left
- SAFETY AND SECURITY
- Anti-theft system (COMPASS)
- Caterpillar Corporate “One Key” System
- Door locks
- Lockable fuel cap
- Rearview camera
- Retractable seat belt
- Roll Over Protective Structure (ROPS) (ISO 12117-2)
- Tip Over Protective Structure (TOPS) (ISO 12117)
- Top guard – ISO 10262 (Level II)
- Travel alarm (optional in Europe)
308E2 CR Optional Equipment
- HYDRAULIC SYSTEM
- Quick coupler lines
- Boom lowering check valve (Standard on VAB configuration.)
- Stick lowering check valve (Standard on VAB configuration.)
- Secondary auxiliary hydraulic lines (Standard on VAB configuration.)
- UNDERCARRIAGE
- Blade, weld on
- Track, triple grouser (steel), 450 mm (18 in)
- Track, triple grouser (steel) with rubber pad, 450 mm (18 in)
- Track, triple grouser (steel), 600 mm (24 in)
- FRONT LINKAGE
- Quick coupler: manual or hydraulic
- Thumb
- Buckets
- Full range of performance matched work tools
- Auger, hammer, shear, ripper
- SAFETY AND SECURITY
- Battery disconnect
- Front wire mesh guard
- Front steel plate guard
- Rain guard
- OTHER ATTACHMENTS
- Counterweight, extra, 1121 kg (2,493 lb) (Standard on VAB configuration.)
360° INTERACTIVE
Exterior
Interior
RELATED PRODUCTS
300.9D
mini excavators
- Engine Model: Yanmar 31NV70
- Displacement: 854 cm³52 in³
- Type: Water cooled model 3-cylinder diesel engine
301.4C
mini excavators
- Engine Model: Yanmar 3TNV76
- Displacement: 1116 cm³68.1 in³
- Note: Weights do not include worktools.
301.7D
mini excavators
- Engine Model: Yanmar 3TNV76
- Displacement: 1116 cm³40 in³
- Fuel Tank Capacity: 24 l6.3 gal (US)
301.7D CR
mini excavators
- Engine Model: Yanmar 3TNV76
- Displacement: 1116 cm³68.1 in³
- Fuel Tank Capacity: 19 l5 gal (US)
302.4D
mini excavators
- Engine Model: Yanmar 3TNV76
- Displacement: 1116 cm³40 in³
- Fuel Tank Capacity: 24 l6.3 gal (US)
302.7D CR
mini excavators
- Engine Model: Yanmar 3TNV76
- Displacement: 1115 cm³68 in³
- Gross Power: 17.9 kW24.3 HP
303.5E CR
mini excavators
- Engine Model: Cat® C1.8
- Bore: 87 mm3.4 in
- Stroke: 102.4 mm4 in
303E CR
mini excavators
- Engine Model: Cat C1.3
- Bore: 78 mm3.1 in
- Stroke: 88 mm3.5 in
304E2 CR
mini excavators
- Engine Model: Cat® C2.4
- Bore: 87 mm3.4 in
- Stroke: 102.4 mm4 in
