US
METRIC
Power Grid Stabilization (PGS) Module
KEY SPECS
- Application Transient Assist
- Module Type Grid stabilization
- Nameplate Power 767 kW | 1000 kW
OVERVIEW
BENEFITS
-
Up to 1260 kilowatts
- Generator set transient-assist enables operation of highly-efficient lean-burn gas gensets in island mode, shutdown of one or more gensets for fuel savings, and achievement of high power quality on highly transient loads
-
Up to 30 min. Continuous Power
- Enables smoothing of intermittent medium-penetration renewables, backup of facilities from outages, and contribution of ancillary services to grid
-
Over 100+ megawatts parallel-ready
- Multiple modules used in parallel increase total output
FEATURES AT A GLANCE
Reliable and Scalable
Factory prepackaged and tested
- Pre-engineered containershipped as a single unit with batteries, inverter, isolation transformer and other equipment installed.
- Parallel ready - multiple modules may be used in parallel to increase total output up to 100+MW.
Renewable Integration
- Designed to work with an array of renewable systems, including solar and wind
- Seamless integration with Cat Microgrid Master Controller (MMC) allows for maximum renewable penetration and full asset control
Transient Assist
When used with a generator set, the Cat PGS module will provide reserve power capacity to:
- Decrease the transient voltage and frequency dips resulting from the application of large loads.
- Enables highly-efficient lean-burn gas gensets to operate in island mode.
Grid Stabilization
- Protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.
High Performance Inverter
- Built-in controls for the charging and discharging of the energy storage equipment.
- Static VAR compensator.
- Four-quadrant output power factor control.
- Automatic anti-islanding to meet UL 1741 and synchronization back to grid.
Applicable Standards and Certifications
UL Listed to the following standards (certification and mark pending):
- UL 9540
- UL 1741 SB
- CSA C22.2 No. 107.1/16
- cULus mark
- CE Declaration of conformity
- IEC60204-1
SPECIFICATIONS
- Application Transient Assist
- Module Type Grid stabilization
- Nameplate Power 767 kW | 1000 kW
- Nameplate Energy Capacity 448 kWh | 672 kWh
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.