US
METRIC
24
OVERVIEW
BENEFITS
-
Maintain cross slope
- Cat Grade Control helps operator maintain desired cross slope.
-
Up To 11% More Weight
- Ensures reliable traction and blade down pressure.
-
Manage your fleet
- Cat MineStar helps manage your fleet to optimize quality and operating costs.
FEATURES AT A GLANCE
LOWER MAINTENANCE COSTS
- The improved power train rebuild life, new modular design and new machine protection features can save you up to 2,400 servicing hours over the life of the machine.
- Cat C27 engine, 533 mm (21 in) transmission and lower power train provide 33 percent additional machine life before needing to be rebuilt.
- New, innovative main component modular design means they can be removed and installed quicker and easier. Transmission and cooling package can be removed up to 70 percent faster than the 24M.
- Fluid Service Center provides single location at ground level for access to engine, transmission, hydraulic oil and coolant. This feature, along with clustered filters and extended service intervals, saves you maintenance time and operating costs.
- Hoses and electrical harnesses are split at easily accessible bulkhead locations allowing your service technicians to work with smaller sections easier and faster.
- Ok-to-Start and Critically Low Fluid monitoring systems protect your machine by providing electronic verification of fluid levels and alerting you when low fluid levels are detected, protecting your machine.
MAXIMIZE PERFORMANCE
- Cat C27 engine provides enhanced altitude capabilities with no derate up to 3048 m (10,000 ft) for U.S. EPA Tier 4/EU Stage IV emission standards and 4572 m (15,000 ft) for equivalent Tier 2/Stage II emissions.
- An 11 percent weight increase helps provide more traction and blade down pressure than the 24M.
- Consistent Power-to-the-Ground changes real-time engine power levels to offset cooling fan losses resulting in best performance at all times independent of ambient conditions.
- The new high performance circle (HPC) for the Cat 24 Motor Grader improves machine performance, efficiency and uptime availability when maintaining hauls roads at large mines.
ENSURING A SAFE JOB SITE
- Fifteen tie-off points located around engine enclosure and cab provide secure tie off hooks protecting you and your technicians when performing service operations.
- Optional Working at Heights package adds an extra layer of safety by providing handrails and hand holds to improve access and safety.
- The 24 is a Fire Suppression-Ready machine which means you can easily install a fire suppression system to further protect your investment.
- Standard rearview camera provides better visibility from the cab to behind the machine while optional front-facing cameras provide enhanced forward and side visibility.
- Standard seat belt indicator provides visual/audible alerts when the seat belt is not in use. The 24 is pre-wired so you can easily install a beacon on top of the cab to indicate seat belt usage.
TECHNOLOGY THAT PUSHES PROFITS
- The 24 features asset protection and performance-improving technologies including: engine overspeed/underspeed, second generation steering system, articulation eStop, ripper auto stow, implements lock out and circle angle limits, to name a few.
- Standard Cat Grade with Cross Slope improves operator productivity and haul road quality and durability by helping maintain desired cross slope for appropriate water drainage by automatically controlling one side of the blade.
- The Cat 24 is MineStar™ ready and includes Cat Product Link™ Elite and VIMS™ to help optimize equipment management, remote monitoring capabilities, machine availability and component life while reducing both repair cost and the risk of a catastrophic failure.
SPECIFICATIONS
- Net Power - EEC 80/1269 399kW
- Bore 137.2mm
- Stroke 152.4mm
- Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
- Note (3) Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
- Note (2) Optimized VHP Plus is standard for the 24.
- Standard Capability 50°C
- Emissions Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
- Note (4) Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)
- Engine Model Cat C27
- Displacement 27.03l
- Number of Cylinders 12
- Operating Weight - Typically Equipped 74985kg
- Blade Width 7.3m
- Blade Height 1025mm
- Maximum Depth of Cut 550mm
- Maximum Lift Above Ground 410mm
- Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
- Weight* 73344kg
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
160 LVR
Motor Graders
- Base Power (1st Gear) - Net139kW
- Engine ModelCat C7
- Displacement7.2l
140 LVR
Motor Graders
- Base Power (1st Gear) - Net128kW
- Engine ModelCat C7
- Displacement7.2l
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
