US
METRIC
980L
KEY SPECS
- Net Power - ISO 9249 278kW
- Engine Model Cat C13
- Maximum Power - 1,800 rpm - ISO 14396 - Metric 303kW
OVERVIEW
BENEFITS
-
Up To 5% More Power
- Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade. High capacity torque converter results in greater digging efficiency.
-
Designed for Operators
- New best-in-class operator environment provides unmatched comfort, visibility, and efficiency. Controls are easy to use, intuitive, and user-friendly.
-
Up To 25% Fuel Savings
- Engine burns less fuel by providing power and torque when needed. Load sensing hydraulics result in proportional flow for implement and steering on demand. Machine equipped with easy to load buckets.
FEATURES AT A GLANCE
RELIABILITY YOU CAN COUNT ON
- Cat® C13 engine offers increased power.
- Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.
LONG TERM VALUE AND DURABILITY
- Heavy-duty powershift transmission and axles handle extreme applications.
- Improved hydraulic hose routing reduces potential hose wear.
- Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.
BUILT TO PERFORM
- Engine power increased by approximately 5% improves machine performance and response (compared to H Series).
- Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
- High capacity torque converter results in greater digging efficiency.
- Z-bar linkage provides high breakout force at ground level.
- Optional high lift linkage offers increased hinge pin height to load more easily in a variety of applications.
- Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
- Optional limited slip differentials improve performance in the pile and poor underfoot conditions.
- Optional Aggregate Handler configuration offers slightly higher payload capability for loose aggregate rehandling.*
* Optional configurations and equipment may vary from region to region and requires conformance to Caterpillar payload policy. Consult your dealer or Caterpillar representative for details.
DO MORE WITH LESS FUEL
- Up to 25% lower fuel consumption than H Series.*
- Power dense engine burns less fuel by providing power and torque when needed.
- Performance Series Buckets feature a longer floor that easily digs through the pile resulting in lower fuel consumption.
- Load sensing hydraulics result in proportional flow for implement and steering on demand.
- Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.
* Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.
DESIGNED FOR OPERATORS
- New best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
- Intuitive, ergonomic controls keep operators focused on their work.
- Optional new ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.
SAFELY HOME EVERY DAY
- Excellent cab access with wide door and stair-like steps.
- Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.
- Robust, repositioned grab bars provide safe access to the machine.
SAVE ON SERVICE AND MAINTENANCE
- One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
- Safe, ground level access to fuel fill and daily maintenance points means less servicing time is required.
- Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.
TECHNOLOGY THAT GETS WORK DONE
- Monitor, manage and enhance job site operations.
- Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
- Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increases operator awareness of the working environment which enhances site safety.
- Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.
SPECIFICATIONS
- Net Power - ISO 9249 278kW
- Engine Model Cat C13
- Maximum Power - 1,800 rpm - ISO 14396 - Metric 303kW
- Operating Weight 30090kg
- Bucket Capacities 4.2-12.2 m³ (5.5-16.0 yd³)
- Maximum Net Power - 1,800 rpm - ISO 9249 - Metric 278kW
- Cooling System 45l
- Crankcase 37l
- Transmission 77l
- Hydraulic Tank 153l
- Note (1) *Distance of 15 m, moving forward in second gear ratio.
- With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 72dB(A)
- Differential - Final Drives - Front 84l
- Differential - Final Drives - Rear 84l
- Forward - 1 6.9km/h
- Forward - 2 13.3km/h
- Forward - 3 23.5km/h
- Forward - 4 39.5km/h
- Breakout Force 224kN
- Static Tipping Load - Full 37° Turn - With Tire Deflection 19565kg
- Static Tipping Load - Full 37° Turn - No Tire Deflection 20796kg
- With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008) 75dB(A)
- With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 109 LWA***
- Note (2) **For machines in countries that adopt the EU Directives.
- Reverse - 1 7.8km/h
- Reverse - 2 15.2km/h
- Reverse - 3 26.9km/h
- Implement System - Maximum Operating Pressure 34300kPa
- Implement System - Maximum Pump Output at 2,250 rpm 449l/min
- Fuel Tank 426l
- Implement Pump Type Variable Displacement Piston
- Displacement 12.5l
- Reverse - 4 39.5km/h
- Height - Top of Exhaust Pipe 3746mm
- Overall Length - Without Bucket 8302mm
- Rack Back - Maximum Lift 61 degrees
- Hydraulic Cycle Time - Total 10.1s
- Note All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
- Rack Back - Carry Height 48 degrees
- Ground Clearance 453mm
- Height - Top of Exhaust Pipe 3746mm
- Height - Top of ROPS 3813mm
- Note Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m? general purpose bucket with BOCE.
- Maximum Width over Tires 3296mm
- Hinge Pin Height at Carry 678mm
- Maximum Width over Tires 3296mm
- Height - Top of Hood 3110mm
- Peak Gross Torque - 1,300 rpm - ISO 14396 2172N·m
- Centerline of Rear Axle to Hitch 1900mm
- Maximum Net Torque - 1,000 rpm 2040N·m
- With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008) 112dB(A)
- Rack Back - Maximum Lift 61 degrees
- Rack Back at Ground 39 degrees
- Centerline of Rear Axle to Edge of Counterweight 2608mm
- Rack Back at Ground 40 degrees
- Height - Top of ROPS 3813mm
- Overall Length - Without Bucket 8214mm
- Wheel Base 3800mm
- Wheel Base 3800mm
- Hinge Pin Height at Maximum Lift 4760mm
- Note (3) ***European Union Directive 2000/14/EC as amended by 2005/88/EC.
- Centerline of Rear Axle to Hitch 1900mm
- Rack Back - Carry Height 48 degrees
- Ground Clearance 453mm
- Hinge Pin Height at Maximum Lift 4539mm
- Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
- Note Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm roll radius.
- Note All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
- Tread Width 2440mm
- Centerline of Rear Axle to Edge of Counterweight 2608mm
- Tread Width 2440mm
- Lift Arm Clearance at Maximum Lift 4010mm
- Height - Top of Hood 3110mm
- Lift Arm Clearance at Maximum Lift 3795mm
- Hinge Pin Height at Carry 621mm
- With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013) 78 dB(A)*
- Note (1) For a machine configuration as defined under "Weight."
- Bucket Range 4.2-12.2 m³ (5.5-16.0 yd³)
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
906K
Wheel Loaders
- Net Power51kW
- Engine ModelCat C3.3B DIT*
- Maximum Gross Power - SAE J199555kW
908K
Wheel Loaders
- Net Power51kW
- Maximum Net Power - SAE J134951kW
- Engine ModelCat C3.3B DIT*
910K
Wheel Loaders
- Net Power72kW
- Rated Net Power - SAE J134972kW
- Rated Net Power - Rated Engine Speed2200r/min
914K
Wheel Loaders
- Net Power72kW
- Rated Net Power - Rated Engine Speed2200r/min
- Maximum Gross Power - ISO 1439674kW
914K
Wheel Loaders
- Maximum Gross Power75kW
- Engine ModelCat C4.4
- Maximum Gross Power - Maximum Engine Speed2350r/min
924K
Wheel Loaders
- Engine ModelCat® C7.1
- Bucket Capacities1.7-5.0 m3 (2.2-6.5 yd3)
- Operating Weight11795kg
930K
Wheel Loaders
- Engine ModelCat® C7.1
- Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)113kW
- Bucket Capacities2.1-5.0 m3 (2.7-6.5 yd3)
938K
Wheel Loaders
- Maximum Gross Power140kW
- Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)140kW
- Engine ModelCat® C7.1
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
