US
METRIC
950L
KEY SPECS
- Net Power - ISO 9249 185kW
- Emissions Tier 3/Stage IIIA
- Maximum Gross Power - 2,000 rpm - ISO 14396 - Metric 195 kW (265 hp)
OVERVIEW
BENEFITS
-
Up To 22% More Power
- Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade. High capacity torque converter results in greater digging efficiency.
-
Designed for Operators
- New best-in-class operator environment provides unmatched comfort, visibility, and efficiency. Controls are easy to use, intuitive, and user-friendly.
-
Up To 10% Fuel Savings
- Engine burns less fuel by providing power and torque when needed. Load sensing hydraulics result in proportional flow for implement and steering on demand. Machine equipped with easy to load buckets.
FEATURES AT A GLANCE
RELIABILITY YOU CAN COUNT ON
- Cat® C7.1 engine offers a combination of proven electronic, fuel, and air systems.
- Utilizing rigorous component design and machine validation processes results in unmatched reliability, durability and high uptime.
LONG TERM VALUE AND DURABILITY
- Tough countershaft powershift transmission and axles handle extreme applications.
- Improved hydraulic hose routing reduces potential hose wear.
- Full flow hydraulic filtration system with additional loop filtration improves hydraulic system robustness and component life.
BUILT TO PERFORM
- Engine power increased by approximately 22% improves machine performance and response (compared to H Series).
- Lock-up clutch torque converter, combined with lock-to-lock shifting, delivers smooth shifts, fast acceleration and speed on grade.
- High capacity torque converter results in greater digging efficiency.
- Z-bar linkage provides high breakout force at ground level.
- Optional high lift linkage offers increased hinge pin height to load more easily in a variety of applications.
- Easy-to-load Performance Series Buckets feature a wider mouth and curved side plates that improve material retention (fill factor) and decrease cycle times.
- Optional fully automatic traction control system (differential locks) improves performance in the pile and poor underfoot conditions.
DO MORE WITH LESS FUEL
- Up to 10% lower fuel consumption than H Series.*
- Power dense engine burns less fuel by providing power and torque when needed.
- Performance Series Buckets feature a longer floor that easily digs through the pile resulting in lower fuel consumption.
- Load sensing hydraulics result in proportional flow for implement and steering on demand.
- Standard productive Economy Mode provides maximum fuel savings with minimal productivity impact.
* Actual results may vary based on factors such as, but not limited to, machine configuration, operator technique, machine application, climate, etc.
DESIGNED FOR OPERATORS
- New best-in-class operator environment provides unmatched comfort, visibility, and efficiency.
- Intuitive, ergonomic controls keep operators focused on their work.
- Optional new ride control system with dual accumulators provides excellent ride quality and lowers cab vibrations.
ENSURING A SAFE JOB SITE
- Excellent cab access with wide door and stair-like steps.
- Floor to ceiling windshield, large mirrors with integrated spot mirrors and rear vision camera provide industry leading all-around visibility.
- Robust, repositioned grab bars provide safe access to platforms.
SAVE ON SERVICE AND MAINTENANCE
- One-piece tilting hood with side and rear doors; hydraulic and electrical service centers make access fast and easy.
- Safe ground level access to fuel fill, oil fill, filters and daily maintenance points means less servicing time required.
- Optional, fully integrated Cat Autolube system provides full lube system monitoring and diagnostic test visibility.
TECHNOLOGY THAT GETS WORK DONE
- Monitor, manage and enhance job site operations.
- Cat LINK Technologies: VisionLink® enables owners to access data wirelessly to monitor machine health, utilization and location.
- Cat DETECT Technologies: Integrated rear vision camera enhances visibility behind machine to help operators work safely. Optional Cat Rear Object Detection increases operator awareness of the working environment which enhances site safety.
- Cat PAYLOAD Technologies: Optional Cat Production Measurement 2.0 brings simple and accurate on-the-go payload scale allowing operators to deliver exact loads and work more efficiently. Advanced Productivity subscription provides comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.
SPECIFICATIONS
- Net Power - ISO 9249 185kW
- Emissions Tier 3/Stage IIIA
- Maximum Gross Power - 2,000 rpm - ISO 14396 - Metric 195 kW (265 hp)
- Maximum Net Power - 2,000 rpm - ISO 9249 - Metric 185 kW (252 hp)
- Peak Gross Torque - 1,400 rpm - ISO 14396 1050N·m
- Displacement 7.01l
- Engine Model Cat C7.1
- Operating Weight 18136kg
- Bucket Capacities 2.7-4.4 m³ (3.5-5.8 yd³)
- Static Tipping Load - Full 40° Turn - With Tire Deflection 10926kg
- Breakout Force 152kN
- Static Tipping Load - Full 40° Turn - No Tire Deflection 11624kg
- Forward - 4 25.7km/h
- Reverse - 1 6.9km/h
- Reverse - 2 12km/h
- Reverse - 3 25.7km/h
- Forward - 3 19.3km/h
- Forward - 1 6.9km/h
- Forward - 2 12km/h
- Implement Pump Type Variable Axial Piston
- Implement System - Maximum Pump Output at 2,340 rpm 245l/min
- Hydraulic Cycle Time - Total 9.5s
- Implement System - Maximum Operating Pressure 27900kPa
- Cooling System 54l
- Differential - Final Drives - Rear 43l
- Differential - Final Drives - Front 43l
- Fuel Tank 275l
- Crankcase 20l
- Transmission 43l
- Hydraulic Tank 125l
- With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008) 72dB(A)
- With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013) 75 dB(A)*
- With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008) 107dB(A)
- Centerline of Rear Axle to Edge of Counterweight 2083mm
- Height - Top of ROPS 3446mm
- Overall Length - Without Bucket 6939mm
- Height - Top of Hood 2697mm
- Hinge Pin Height at Maximum Lift 3995mm
- Centerline of Rear Axle to Edge of Counterweight 2071mm
- Centerline of Rear Axle to Hitch 1675mm
- Rack Back at Ground 45 degrees
- Hinge Pin Height at Carry Height 765mm
- Ground Clearance 368mm
- Hinge Pin Height at Carry Height 663mm
- Lift Arm Clearance at Maximum Lift 3794mm
- Wheel Base 3350mm
- With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)** 104 LWA***
- With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)** 69dB(A)
- Note Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm roll radius.
- Note (3) ***European Union Directive 2000/14/EC as amended by 2005/88/EC.
- Tread Width 2140mm
- Maximum Net Torque - 1,400 rpm 984N·m
- Note (1) For a machine configuration as defined under "Weight."
- Height - Top of ROPS 3446mm
- Tread Width 2140mm
- Rack Back - Maximum Lift 66 degrees
- Overall Length - Without Bucket 7428mm
- Note (1) *Distance of 15 m, moving forward in second gear ratio.
- Rack Back - Carry Height 49 degrees
- Forward - 5 39.5km/h
- Height - Top of Hood 2697mm
- Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
- Rack Back - Carry Height 54 degrees
- Rack Back - Maximum Lift 60 degrees
- Note Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link™, open/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m³ general purpose bucket with BOCE.
- Wheel Base 3350mm
- Note (2) **For machines in countries that adopt the EU Directives.
- Height - Top of Exhaust Pipe 3415mm
- Ground Clearance 368mm
- Rack Back at Ground 41 degrees
- Maximum Width - Over Tires - Loaded 2822mm
- Note All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
- Note (2) Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
- Maximum Width - Over Tires - Loaded 2822mm
- Centerline of Rear Axle to Hitch 1675mm
- Lift Arm Clearance at Maximum Lift 3410mm
- Hinge Pin Height at Maximum Lift 4490mm
- Height - Top of Exhaust Pipe 3415mm
- Emissions Tier 3/Stage IIIA
- Bucket Range 2.7-4.4 m³ (3.5-5.8 yd³)
PRODUCT BROCHURES AND MORE ARE READY TO DOWNLOAD!
Caterpillar product brochures and other informational documents are available for your growing business.
RELATED PRODUCTS
906K
Wheel Loaders
- Net Power51kW
- Engine ModelCat C3.3B DIT*
- Maximum Gross Power - SAE J199555kW
908K
Wheel Loaders
- Net Power51kW
- Maximum Net Power - SAE J134951kW
- Engine ModelCat C3.3B DIT*
910K
Wheel Loaders
- Net Power72kW
- Rated Net Power - SAE J134972kW
- Rated Net Power - Rated Engine Speed2200r/min
914K
Wheel Loaders
- Net Power72kW
- Rated Net Power - Rated Engine Speed2200r/min
- Maximum Gross Power - ISO 1439674kW
914K
Wheel Loaders
- Maximum Gross Power75kW
- Engine ModelCat C4.4
- Maximum Gross Power - Maximum Engine Speed2350r/min
924K
Wheel Loaders
- Engine ModelCat® C7.1
- Bucket Capacities1.7-5.0 m3 (2.2-6.5 yd3)
- Operating Weight11795kg
930K
Wheel Loaders
- Engine ModelCat® C7.1
- Maximum Gross Power - 1,600 rpm - ISO 14396 (Standard Power Mode: Range 1-3*)113kW
- Bucket Capacities2.1-5.0 m3 (2.7-6.5 yd3)
938K
Wheel Loaders
- Maximum Gross Power140kW
- Maximum Gross Power - 1,800 rpm - ISO 14396 (Performance Power Mode: Range 1-4)140kW
- Engine ModelCat® C7.1
Tools and Expert Help At Every Turn
Find Dealer > Payment Calculator > Rental Options > Used Options >MEDIA GALLERY
