| Bit Load | Up to 32 655 kg (Up to 71,993 lb) |
| Hole Diameter | Up to 152-250 mm (Up to 6-9.8 in) |
| Engine | C27 ACERT™ @ 1,800 rpm |
| 11.2 m (36.7 ft) Mast - Hole Diameter Range | Up to 152-250 mm (Up to 6-9.8 in) |
| 11.2 m (36.7 ft) Mast - Hole Depth Range - Single Pass Depth | 11.2 m36.7 ft |
| 11.2 m (36.7 ft) Mast - Hole Depth Range - Multi Pass Depth | Down to 53.6 m (Down to 176.7 ft) |
| 11.2 m (36.7 ft) Mast - Pulldown Capacity | Up to 20 411 kgf (Up to 45,000 lbf) |
| 11.2 m (36.7 ft) Mast - Hoist Capacity | Up to 20 411 kgf (Up to 45,000 lbf) |
| 11.2 m (36.7 ft) Mast - Hoist Speed | 0.81 m/s2.67 ft/s |
| 11.2 m (36.7 ft) Mast - Bit Load - Single Pass | Up to 22 321 kg (Up to 49,210 lb) |
| 13.6 m (44.6 ft) Mast - Hole Diameter Range | Up to 152-250 mm (Up to 6-9.8 in) |
| 13.6 m (44.6 ft) Mast - Hole Depth Range - Single Pass Depth | 13.6 m44.6 ft |
| 13.6 m (44.6 ft) Mast - Hole Depth Range - Multi Pass Depth | Down to 37.9 m (Down to 124.6 ft) |
| 13.6 m (44.6 ft) Mast - Pulldown Capacity | Up to 29 483 kgf (Up to 65,000 lbf) |
| 13.6 m (44.6 ft) Mast - Hoist Capacity | Up to 22 113 kgf (Up to 48,750 lbf) |
| 13.6 m (44.6 ft) Mast - Hoist Speed | 0.66 m/s2.16 ft/s |
| 13.6 m (44.6 ft) Mast - Bit Load - Single Pass | Up to 32 655 kg (Up to 71,993 lb) |
| U.S. EPA Tier 2 Equivalent - Engine | C27 ACERT @ 1,800 rpm |
| U.S. EPA Tier 2 Equivalent - Emissions | U.S. EPA Tier 2 equivalent |
| U.S. EPA Tier 2 Equivalent - Rated Horsepower | 652 kW875 HP |
| U.S. EPA Tier 2 Equivalent - Elevation Capability | 4750 m15000 ft |
| U.S. EPA Tier 4 Final - Engine | C27 ACERT @ 1,800 rpm |
| U.S. EPA Tier 4 Final - Emissions | U.S. EPA Tier 4 Final |
| U.S. EPA Tier 4 Final - Rated Horse Power | 655 kW879 HP |
| U.S. EPA Tier 4 Final - Elevation Capability | 3658 m12000 ft |
| Compressor - Rotary Drilling | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) |
| Compressor - DTH Drilling (1) | 38.2 m³/min (1,350 ft³/min) @ 34.4 bar (500 psi) |
| Compressor - DTH Drilling (2) | 42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi) |
| Angle Drilling Available | 30° (in 5° increments) |
| U.S. EPA Tier 2 Equivalent - Engine | C27 ACERT @ 1,800 rpm |
| U.S. EPA Tier 2 Equivalent - Emissions | U.S. EPA Tier 2 equivalent |
| U.S. EPA Tier 2 Equivalent - Rated Horsepower | 652 kW875 HP |
| U.S. EPA Tier 4 Final - Engine | C27 ACERT @ 1,800 rpm |
| U.S. EPA Tier 4 Final - Emissions | U.S. EPA Tier 4 Final |
| U.S. EPA Tier 4 Final - Rated Horse Power | 655 kW879 HP |
| Components (1) | Dual starter motors |
| Components (2) | Ether starting aid |
| Components (3) | Common air intake filters provide +500 hour service interval normal operating conditions |
| Features | Scheduled oil sampling (S·O·S℠) ports |
| DTH Drilling | Includes tool lubrication system and hammer storage |
| DTH Drilling - 1350 cfm/500 psi | 38.2 m³/min (1,350 ft³/min) @ 34.4 bar (500 psi) includes 113 L (30 gal) tool oiler |
| DTH Drilling - 1500 cfm/350 psi | 42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi) includes 113 L (30 gal) tool oiler |
| Rotary Drilling | Optional tool lubrication system |
| Rotary Drilling - 2000 cfm/125 psi | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) |
| Choice | Compressor control box enclosure with purged air lines |
| Note | With the compressors variable volume control, the operator can limit air output and engine speed both resulting in reduced fuel consumption. All of these compressors contain this feature. |
| Choice (1) | Low pressure 8.6 bar (125 psi) for ASME/CRN/AU or CE |
| Choice (2) | High pressure 24.1 or 34.4 bar (350 or 500 psi) for ASME/CRN/AU or CE |
| Components (1) | Coolers with easy cleaning access |
| Components (2) | Separate engine cooling module |
| Components (3) | All cooler core sections are replaceable |
| Components (4) | Automatic variable speed fan control |
| Features | Functional in ambient temperature of 52° C (125° F) |
| Climate Level 1 Standard Fluids and Lubricants (1) | –1° C (30° F) |
| Climate Level 1 Standard Fluids and Lubricants (2) | Withstands high heat to 52° C (125° F) |
| Climate Level 2 Arctic Fluids and Lubricants | –18° C (–0.4° F) |
| Climate Level 4 Arctic Fluids and Lubricants (1) | –40° C (–40° F) Level 4 Arctic fluids and lubricants; –40° C (–40° F) Temps |
| Climate Level 4 Arctic Fluids and Lubricants (2) | Engine coolant and water tank heater, battery trays and provision for fuel heating – diesel fired |
| Climate Level 4 Arctic Fluids and Lubricants (3) | 50 Hz High Pressure (or choose Low Pressure) Compressor, Tier 4 engine |
| Climate Level 4 Arctic Fluids and Lubricants (4) | Arctic fluids, genset ready heater, blankets for tanks and batteries, heated water suction lines, drill pipe thread grease bucket |
| Climate Level 4 Arctic Fluids and Lubricants (5) | Shore power connection box with switchable 240-600 volt, 50 amp waterproof connection |
| Features (1) | Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life |
| Features (2) | Slip resistant surface on all decks and walkways |
| Features (3) | Fuel tank capacity 1609 L (425 gal) |
| Features (4) | Fuel capacity expansion for additional 1609 L (425 gal) |
| Features (5) | Three (3) egress points on deck areas in addition to main access |
| Features (6) | Platform to mount fire suppression bottles |
| Components (1) | Stationary drill deck for vertical and angle drilling |
| Components (2) | Four leveling jacks provide leveling on a 7° bench (any orientation) |
| Components (3) | Heavy duty tow hooks (front end) |
| Components (4) | Four (4) lift lugs, for use with cables or chains |
| Components (5) | Walkway, with railing and toe guards, for cab perimeter to drill deck |
| Components (6) | Pipe guide roller assembly mounted on drill deck for loading drill pipe |
| Choice (1) | Fixed access ladder to the cab area with spring loaded self-closing gate |
| Choice (2) | Cascading, hydraulic stairs with walkway around the cab to the deck. Includes tram interlock for when the ladder is down. |
| Components (1) | Toolbox |
| Components (2) | Hydraulic viewing hatch on drill deck with spotlight |
| Components (3) | Drill pipe thread greaser with remote fill tank or disposable grease bucket |
| Components (4) | Jib crane ready (option) |
| Model | Cat® 336E EL Excavator type |
| Ground Clearance | 610 mm24 in |
| Carrier Rollers | Three carrier rollers |
| Track chain guards and guides | Level two |
| Drawbar Pull | 417000 N93745 lbf |
| Travel Speed Display | 2.45 km/h1.5 mile/h |
| Triple Grousers (1) | 600 mm (23.6 in); for hard rock 1.44 bar (21 psi) ground pressure |
| Triple Grousers (2) | 750 mm (29.5 in); for soft rock 1.17 bar (17 psi) ground pressure |
| Components (1) | Auxiliary circuit pump |
| Components (2) | Two fan pumps |
| Components (3) | Two primary pumps |
| Components (4) | Charge pump |
| Width Cab End | 5.624 m18.45 ft |
| Width Non-Cab End | 4.819 m15.81 ft |
| Width Cab End | 5.624 m18.45 ft |
| Width Non-Cab End | 4.819 m15.81 ft |
| Dual purpose carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of two (2) | – Quantity of two (2) 7.6 m (25 ft) starter pipes (included in the drill tool package)
– 168 mm (6.625 in) |
| Dual purpose carousel pipe: 6.1 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of two (2) | – Quantity of two (2) 3 m (10 ft) starter pipes (included in the drill tool package)
– 140 mm (5.5 in)
– 168 mm (6.625 in) |
| Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4) | – 127 mm (5.0 in)
– 140 mm (5.5 in)
– 152 mm (6.0 in)
– 165 mm (6.5 in)
– 178 mm (7.0 in)
– 194 mm (7.625 in) |
| Standard carousel pipe: 6.1 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4) | – 127 mm (5.0 in)
– 140 mm (5.5 in)
– 152 mm (6.0 in)
– 165 mm (6.5 in)
– 178 mm (7.0 in)
– 194 mm (7.625 in) |
| Components (5) | Scheduled Oil Sampling (S·O·S) ports |
| Components (13) | Lifting lugs |
| Features (1) | Pipe carousel, standard:
– 11.2 m (36.7 ft) Mast: Accepts quantity of four (4) 10.6 m (35 ft) pipes
– 13.6 m (44.6 ft) Mast: Accepts quantity of four (4) 6.1 m (20 ft) pipes |
| Features (2) | Pipe carousel, dual purpose:
– 11.2 m (36.7 ft) Mast: Accepts quantity of two (2) 10.6 m (35 ft) pipes and quantity of two (2) 7.6 m (25 ft) starter pipes (starter pipes are already included with tool group order)
– 13.6 m (44.6 ft) Mast: Accepts quantity of two (2) 6.1 m (20 ft) pipes and quantity of two (2) 3 m (10 ft) starter pipes (starter pipes are already included with tool group order) |
| Features (3) | Vertical or angle drilling 0-30°; in 5° increments |
| Features (4) | Hydraulically actuated, self-indexing pipe carousel accepts various pipe diameters |
| Features (5) | All mast configurations are designed for changing bit above deck |
| Features (6) | Single cylinder pulldown/hoist system |
| Features (7) | Auto tensioning of pull down and hoist cables |
| Features (8) | Deck wrench fits flats of corresponding drill pipe diameters and DTH hammer |
| Features (9) | Feed system accommodates multiple pipe diameters |
| Features (10) | Base plate bushing diameters accommodate bits 152-216 mm (6.0-8.5 in) |
| Features (11) | Hydraulic break out wrenches (HOBO) available with adjustable grip ranges |
| Features (12) | Configured with roller deck bushing |
| Features (13) | Pipe positioner with pipe diameter specific inserts |
| Features (14) | Overhead winch with cable and hook plus remote control; variable speed drive with ≥ 1818 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck (option) |
| Features (15) | Tool oiler, 113 L (30 gal) oil injection system |
| Features (16) | Variable hydraulic break out wrench grip range choices are 114 mm to 152 mm (4.5 in to 6.0 in) or 152 mm to 216 mm (6.0 in to 8.5 in) |
| Features (17) | Camera on mast is closed circuit and used to view the pipe carousel/top drive operation |
| Features (18) | Pipe positioner for angle drilling, multi-pass pipe handling |
| Features (19) | Rotation gear box with single motor, up to 160 rpm, up to 11 600 N·m (8,555 lbf-ft) torque |
| Features (20) | Pipe catchers are available for manual or hydraulically activated operation |
| 11.2 m (36.7 ft) Mast - Single Pass Depth | 11.2 m36.7 ft |
| 11.2 m (36.7 ft) Mast - Multi Pass Depth | Down to 53.6 m (Down to 176.7 ft) |
| 11.2 m (36.7 ft) Mast - Pulldown - Rated Single Cylinder Pulldown/Hoist System | Up to 20 411 kgf (Up to 45,000 lbf) |
| 11.2 m (36.7 ft) Mast - Hoist | Up to 20 411 kgf (Up to 45,000 lbf) |
| 13.6 m (44.6 ft) Mast - Single Pass Depth | 13.6 m44.6 ft |
| 13.6 m (44.6 ft) Mast - Multi Pass Depth | Down to 37.9 m (Down to 124.6 ft) |
| 13.6 m (44.6 ft) Mast - Pulldown | Up to 29 483 kgf (Up to 65,000 lbf) |
| 13.6 m (44.6 ft) Mast - Hoist | Up to 22 113 kgf (Up to 48,750 lbf) |
| Angle Drilling | Available with any mast |
| Accessory (1) | 11.2 m (36.7 ft) or 13.6 m (44.6 ft) Manual pipe catcher – One (1) wire rope pipe catcher, manual bit basket |
| Accessory (2) | 11.2 m (36.7 ft) Mast Hydraulic – One (1) hydraulic pipe catcher, hydraulically actuated pipe positioner, hydraulic bit basket |
| Accessory (3) | 13.6 m (44.6 ft) Mast Hydraulic – One (1) hydraulic pipe catcher, plus one (1) wire rope, hydraulically actuated pipe positioner, hydraulic bit basket |
| Components (1) | One-piece roller deck bushing |
| Components (2) | Pipe positioner roller |
| Components (3) | Deck wrench |
| Components (4) | Cross over subs |
| Components (5) | Pipe wiper seal |
| Components (6) | Drill tool lubricator (optional) |
| Components (1) | Two-piece bushing |
| Components (2) | Pipe positioner roller |
| Components (3) | Deck wrench |
| Components (4) | Cross over adapter for hammer |
| Components (5) | Pipe wiper seal |
| Components (6) | Drill tool lubricator is included with selection of DTH Compressor |
| Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): Rotary/DTH | 127 mm5 in |
| Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): Rotary (1) | 152 mm6 in |
| Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): Rotary (2) | 178 mm7 in |
| Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): Rotary (3) | 193 mm7.625 in |
| Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): DTH (1) | 139 mm5.5 in |
| Standard carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of four (4): DTH (2) | 165 mm6.5 in |
| Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): Rotary/DTH | 127 mm5 in |
| Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): Rotary (1) | 152 mm6 in |
| Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): Rotary (2) | 178 mm7 in |
| Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): Rotary (3) | 193 mm7.625 in |
| Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): DTH (1) | 139 mm5.5 in |
| Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast - Accepts quantity of four (4): DTH (2) | 165 mm6.5 in |
| Dual purpose carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of two (2): Rotary and DTH (1) | 140 mm5.5 in |
| Dual purpose carousel pipe: 6.09 m (20 ft) pipes for 13.6 m (44.6 ft) Mast - Accepts quantity of two (2): Rotary and DTH (2) | 168 mm6.625 in |
| Dual purpose carousel pipe: 10.6 m (35 ft) pipe for 11.2 m (36.7 ft) Mast - Accepts quantity of two (2): Rotary and DTH (1) | 140 mm5.5 in |
| Dual purpose carousel pipe: 10.6 m (35 ft) pipe for 11.2 m (36.7 ft) Mast - Accepts quantity of two (2): Rotary and DTH (2) | 168 mm6.625 in |
| Capacity Rating | 1818 kg4000 lb |
| Cable Diameter | 13 mm0.5 in |
| Reach - Past the Drill Deck | 6.1 m20 ft |
| Components | Variable speed drive |
| Torque - Single Motor | 11700 N·m8629 lb/ft |
| Rotation Speed | 0-150 rpm |
| Components (1) | Spindle – 140 mm (5.5 in) API regular thread with splined collar, shock sub |
| Components (2) | Rotary torque control |
| Components (3) | Virtual rotary head travel interlocks |
| Cab Design | – Spacious FOPS cab has 3 m2 (32.3 ft2) floor space with an integrated operator station
– Cab rubber shock-mounts absorb mechanical vibration and restrict exterior noise
– Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) color displays, high definition touchscreen and 12 volt power port
– Additional display screen for cc cameras; color, high-definition 254 mm (10 in)
– Power convertor 24V to 12V
– Radio-ready for communication and entertainment stereo
– Cab roof access system with ladder, cage and rails (optional)
– Two swing out doors and Cat keyed locks
– Literature holder |
| Cab Packages | – Standard configuration includes a fabric seat, single pane window glass, and wiper for the driller window
– Premium configuration includes additional storage, a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass, a removable guard for front window, a foot rest, wipers for the driller window plus front and rear windows |
| Seating | – Seat swivels, locks and has two point/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in)
– Fold away trainer's seat with seat belt (option) |
| Windows | – Large windows front, rear and right cab side; full length drill window with guard
– Window shade (option)
– Windshield wipers with a common washer tank
– Manometer Pressure Gauge (option) |
| Lighting | – LED interior lights and map light at operators seat, backlit joysticks and keypads
– Flood lights for the drill perimeter
– Spot lights for power group area; drill deck; mast carousel; access ladder and walkways
– Standard lighting is 1,300 lumens flood light on perimeter, area spot lights have 1,950 lumens
– Premium lighting is 4,200 lumens flood light on perimeter
– Mast clearance lights, cab mounted strobe, front mounted tram beacon |
| HVAC | – Floor heating vent
– Roof-mounted air conditioner/heating/pressurizing unit
– Filter access from deck, 500 service interval
– Defogging HVAC vents on main window |
| Cameras | – Three (3) CC cameras (front and left side) providing 360° vision coverage from operators seat; camera on the mast to view pipe carousel/top drive operation |
| Components (1) | All electric controls for drilling, tramming, leveling plus auxiliary functions |
| Components (2) | Rotary torque control |
| Components (3) | Virtual rotary head travel stops |
| Components (4) | Pipe positioner engaged/disengaged indicator |
| Components (5) | Drill depth meter |
| Components (6) | Drill performance and display system |
| Components (7) | Pump drive gearbox temperature system |
| Components (8) | Delayed engine shut down |
| Components (9) | Filter indicators for hydraulic, fuel, compressor and engine |
| Components (10) | Jack pressure sensors in display |
| Components (11) | Data logging of machine health with warnings and fault code records with export capability |
| Components (12) | Dust suppression control |
| Components (13) | Mast lock indicator |
| Components (14) | ECM proportional fan speed control system |
| Components (15) | Tram interlock, machine stability limits |
| Components (16) | Tram interlock, pipe in hole |
| Components (17) | Tram interlock, mast up and locked or down and parked |
| Components (18) | Tram interlock, jack retracted |
| Components (19) | Tram interlock, winch parked |
| Components (20) | Cab environment controls (AC, filter, heat, fan speeds) |
| Components (21) | Pre wired for Terrain and Autonomous Operation |
| Components (1) | Package 1 Controls, Drills Assist |
| Components (2) | Auto level |
| Components (3) | Auto mast; raise and lower |
| Components (4) | Auto drill single-pass |
| Components (5) | Auto retract jacks |
| Type (1) | Autonomy ready |
| Type (2) | Cat Terrain ready |
| Components (1) | Drill depth indicator |
| Components (2) | Drill Assist (auto level, auto retract jacks, auto raise and lower mast, single-pass auto drill) |
| Components (3) | Product Link Elite – Satellite, Cellular, Dual (options) |
| Components (4) | Wiring for third party interface |
| Water Injection - Tank Mounted Below Front Deck | 1271 l336 gal (US) |
| High Volume Water Injection - Maximum - Tanks Total Capacity | 2786 l736 gal (US) |
| Tank Below Deck - Capacity - Isolated for Extreme Cold Weather | 1514 l400 gal (US) |
| Tank Above Deck - Capacity | 1271 l336 gal (US) |
| Water Injection plus Dust Collector (1) | 127 m³/min (4,500 ft³/min) dust collector; includes standard water injection |
| Water Injection plus Dust Collector (2) | Dust collector box with ground level access |
| Water Injection plus Dust Collector (3) | Self-cleaning filters, dust chute clean-out door |
| Choices (1) | Self-purging for winterization |
| Choices (2) | Water flow meter, volume control, tank fill level indicator |
| Choices (3) | Foam injection system |
| Choices (4) | Static dust curtains, four sides boxed enclosed |
| Choices (5) | Water pump interlock |
| Choices (6) | Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dust collector) |
| Choices (7) | Tram off spray system (option) |
| Feature (1) | Platform for mounting fire suppression bottles |
| Feature (2) | Approach angle of 15 degrees facilitates loading and unloading on a lowboy |
| Components (1) | Alloy drill deck covers, for servicing when mast is horizontal |
| Components (2) | Seven (7) engine shut down buttons, by each drill egress/access point, in cab, in engine area, on drill deck |
| Components (3) | Conditional safety interlocks |
| Components (4) | Hinged window guard over the full length of the front drill window |
| Components (5) | Three (3) egress points on deck areas in addition to main access |
| Components (6) | Self-closing gates secure egress ladder locations |
| Components (7) | Electric horn activated by push button in the cab |
| Components (8) | Automatic tram alarm with yellow strobe light |
| Components (9) | Under deck mount battery box with keyed battery disconnect/starter lockout/remote jump start terminals |
| Components (10) | Air hoses have a retention device |
| Components (11) | Slip resistant surfaces |
| Components (12) | Tow hooks |
| Package (1) | Basic – Centralized manual lubrication for all pivot points, gravity fill for fuel and water |
| Package (2) | Standard – Fast fill for fuel and water, automated lubrication system |
| Package (3) | Premium – Service center for lubricant drain and fill, automated lubrication system, fast fill fuel and water, and blowdown hose |
| Width - Front | 5.624 m18.45 ft |
| Width - Rear | 4.819 m15.81 ft |
| Height - Mast Up | 17.011 m55.81 ft |
| Body Length | 11.708 m38.41 ft |
| Length - Mast Down | 17.721 m58.13 ft |
| Height - Mast Down | 5.134 m16.84 ft |
| Mast Only Length | 11.2 m36.7 ft |
| Width - Front | 5.624 m18.45 ft |
| Width - Rear | 4.819 m15.81 ft |
| Height - Mast Up | 19.46 m63.84 ft |
| Body Length | 11.708 m38.41 ft |
| Length - Mast Down | 20.17 m66.17 ft |
| Height - Mast Down | 5.134 m16.84 ft |
| Mast Only Length | 13.6 m44.6 ft |
| Working Weight Range | 56 468 kg to 64 154 kg (124,490 lb to 141,436 lb) |
