Engine Model | Cat® C32 ACERT™ |
Flywheel Power | 634 kW850 HP |
Bore | 145 mm5.7 in |
Stroke | 162 mm6.4 in |
Displacement | 32.1 l1959 in³ |
Emissions | Tier 2 Equivalent |
Engine Power - Gross SAE J1995* | 695 kW932 HP |
Engine Power - ISO 14396 | 692 kW928 HP |
Engine Power - Net SAE J1349/ISO 9249 | 634 kW850 HP |
Net SAE J1349/ISO 9249 | 634 kW850 HP |
Operating Weight | 104236 kg229800 lb |
Shipping Weight | 37485 kg82640 lb |
Operating Weight - CD | 112718 kg248500 lb |
Shipping Weight - CD | 37802 kg83340 lb |
1 Forward | 3.9 km/h2.4 mile/h |
2 Forward | 6.8 km/h4.2 mile/h |
3 Forward | 11.8 km/h7.3 mile/h |
1 Reverse | 4.7 km/h2.9 mile/h |
2 Reverse | 8.2 km/h5.1 mile/h |
3 Reverse | 14 km/h8.7 mile/h |
Type | Planetary powershift |
Transmission Clutch Diameter | 533 mm21 in |
D11T - Bulldozer Relief Valve Setting | 22750 kPa3300 psi |
D11T - Combined Pump Output - Implement | 620 l/min164 gal/min |
D11T - Pump Type | Gear-type pump |
D11T - Ripper (Lift) Relief Valve Setting | 22750 kPa3300 psi |
D11T - Ripper (Pitch) Relief Valve Setting | 22750 kPa3300 psi |
D11T - Tilt Cylinder Relief Valve Setting | 24300 kPa3525 psi |
D11T - Tilt Pump Flow | 155 l/min41 gal/min |
D11T CD - Carrydozer Relief Valve Setting | 24135 kPa3500 psi |
D11T CD - Pump Output - Implement | 670 l/min177 gal/min |
D11T CD - Pump Type | Gear-type pump |
D11T CD - Ripper (Lift) Relief Valve Setting | 24135 kPa3500 psi |
D11T CD - Ripper (Pitch) Relief Valve Setting | 24135 kPa3500 psi |
D11T CD - Tilt Cylinder Flow | 250 l/min66 gal/min |
D11T CD - Tilt Cylinder Relief Valve Setting | 24825 kPa3600 psi |
Shoe Type | Extreme Service |
Width - Shoe | 710 mm28 in |
Shoes/Side | 41 |
Grouser Height | 102 mm4 in |
Pitch | 318 mm12.5 in |
Track Gauge | 2896 mm114 in |
Length - Track on Ground | 4444 mm175 in |
Ground Contact Area | 6.3 m²9781 in² |
Track Rollers/Side | 8 |
Number of Carrier Rollers | 1 per side (optional) |
Ground Clearance* | 777 mm30.6 in |
Ground Contact Area - CD | 8.1 m²12605 in² |
Width - Shoe - CD | 915 mm36 in |
Fuel Tank | 1609 l425 gal (US) |
Cooling System | 269 l71.1 gal (US) |
Engine Crankcase* | 103 l27.2 gal (US) |
Power Train | 344 l90.9 gal (US) |
Final Drive - Each | 47 l12.4 gal (US) |
Roller Frames - Each | 94 l24.8 gal (US) |
Pivot Shaft Compartment | 71 l18.8 gal (US) |
Implement Hydraulic System - Tank Only | 223 l58.9 gal (US) |
Fuel Tank - High Capacity | 1911 l505 gal (US) |
Oscillation | 351 mm13.8 in |
Hydraulically Applied Multiple-disc Steering Clutch | 440 mm17.3 in |
Spring Applied Multiple-disc Brake | 612 mm24.1 in |
FOPS | Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. |
ROPS | Rollover Protective Structure (ROPS) meets the following criteria: SAE J1040 MAY94, ISO 3471:1994. |
Drawbar Height (Center of Clevis)* | 942 mm37.1 in |
Ground Clearance* | 798 mm31.4 in |
Height - FOPS Cab* | 4405 mm173.4 in |
Height - ROPS/Canopy* | 4723 mm185.9 in |
Height - Top of Stack* | 4549 mm179.1 in |
Length - Basic Tractor - With Drawbar | 6160 mm242.5 in |
Length - Track on Ground | 4444 mm175 in |
Length - With Multi-Shank Ripper | 8427 mm331.8 in |
Length - With SU-Blade | 8579 mm337.8 in |
Length - With Single-Shank Ripper | 8107 mm319.2 in |
Length - With U-Blade | 8641 mm340.2 in |
Note (1) | *Includes grouser height for total dimensions on hard surfaces. |
Note (2) | D11T shown equipped with 710 mm (28 in) shoes. |
Overall Length - Basic Tractor | 6160 mm242.5 in |
Overall Length - SU-Blade/SS Ripper | 10525 mm414.4 in |
Track Gauge | 2896 mm114 in |
Width - Over Trunnions | 4379 mm172.4 in |
Width - Without Trunnions - Standard Shoe | 3782 mm148.9 in |
Drawbar Height (Center of Clevis)* | 942 mm37.1 in |
Ground Clearance* | 798 mm31.4 in |
Height - FOPS Cab* | 4405 mm173.4 in |
Height - ROPS/Canopy* | 4723 mm185.9 in |
Height - Top of Stack* | 4549 mm179.1 in |
Length - Basic Tractor - With Drawbar | 6160 mm242.5 in |
Length - Track on Ground | 4444 mm175 in |
Length - With Multi-Shank Ripper | 8427 mm331.8 in |
Length - With SU-Blade** | 8765 mm345.1 in |
Length - With Single-Shank Ripper | 8107 mm319.2 in |
Note (1) | *Includes grouser height for total dimensions on hard surfaces. |
Note (2) | **CD Blade on D11T CD. |
Note (3) | D11T shown equipped with 710 mm (28 in) shoes. |
Overall Length - Basic Tractor | 6160 mm242.5 in |
Overall Length - SU-Blade/SS Ripper** | 10712 mm421.7 in |
Track Gauge | 2896 mm114 in |
Width - Over Trunnions | 4379 mm172.4 in |
Width - Without Trunnions - Standard Shoe | 3806 mm149.8 in |
Note (1) | * Excludes all fan losses. |
Note (2) | Engine ratings apply at 1,800 rpm. |
Note (3) | Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
Note (4) | No derating required up to 3658 m (12,000 ft) altitude. High altitude attachment available for greater than 3658 m (12,000 ft). |
Note (1) | Pump output measured at 1,800 engine rpm and 6895 kPa (1,000 psi). |
Note (2) | Electro-hydraulic pilot valves assist operations of ripper and dozer controls. |
Note (3) | Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers. |
Fuel Tank - Platform Ready | 1778 l470 gal (US) |
Note | * With oil filters. |
Sound (1) | The operator Equivalent Sound Pressure Level (Leq) is 79 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. This is a dynamic cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed. |
Sound (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A). |
Note (1) | * Includes grouser height for total dimensions on hard surface. |
Note (2) | Sleeve Bearing Track with Positive Pin Retention. |
Note (1) | D11T Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. |
Note (2) | D11T Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames. |
Note (3) | D11T CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, single-shank ripper, and operator. |
Note (4) | D11T CD Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames. |