Engine Model | Cat® C175-20 |
Gross Power - SAE J1995 | 2983 kW4000 HP |
Bore | 175 mm6.9 in |
Stroke | 220 mm8.7 in |
Displacement | 106 l6469 in³ |
Note (1) | Power ratings apply at 1,750 rpm when tested under the specific conditions for the specified standard. |
Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 99 kPa (29.32 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (69° F) and an LHV of 42 780 kJ/kg (18,390 Btu/lb) when engine is used at 30° C (38° F). |
Body Weight Range | 41 368-61 235 kg (91,200-135,000 lb) |
Chassis Weight Range | 210 630-219 146 kg (464,359-483,134 lb) |
Target Gross Machine Operating Weight (GMW) | 623690 kg1375000 lb |
Nominal Payload Capacity | 363 t400 ton (US) |
Steer Angle | 40 °40 ° |
Heaped SAE (2:1) Capacity | 240-267 m3 (314-350 yd3) |
Machine Clearance Turning Diameter | 42 m138 ft |
Top Speed - Loaded | 67.6 km/h42 mile/h |
Differential Ratio | 1.276:1 |
Planetary Ratio | 16.67:1 |
Total Reduction Ratio | 21.26:1 |
Forward - 1 | 11.3 km/h7 mile/h |
Forward - 2 | 15.2 km/h9.5 mile/h |
Forward - 3 | 20.5 km/h12.7 mile/h |
Forward - 4 | 27.7 km/h17.2 mile/h |
Forward - 5 | 37.2 km/h23.1 mile/h |
Forward - 6 | 50.3 km/h31.2 mile/h |
Forward - 7 | 67.6 km/h42 mile/h |
Reverse | 11.9 km/h7.4 mile/h |
Rear axle - Oscillation | ±4.0 degrees |
Effective Cylinder Stroke - Front | 313.6 mm12.3 in |
Effective Cylinder Stroke - Rear | 165.1 mm6.5 in |
Body Raise Time - High Idle | 25 s25 s |
High Idle Body Lower Time - Float | 19 s19 s |
Pump Flow - High Idle | 1200 l/min317 gal/min |
Relief Valve Setting - Raise | 24200 kPa3510 psi |
Outside Diameter | 1067 mm42 in |
Standards | ISO 3450:2011 |
Brake Surface | 330517 cm²51243 in² |
Number of Discs per Side - Front | 10 |
Number of Discs per Side - Rear | 15 |
Front Axle - Empty | 47.2% |
Front Axle - Loaded | 33.3% |
Rear Axle - Empty | 52.8% |
Rear Axle - Loaded | 66.7% |
Front Axle - Empty | 47.2% |
Front Axle - Loaded | 33.3% |
Rear Axle - Empty | 52.8% |
Rear Axle - Loaded | 66.7% |
Heaped (SAE 2:1) | 240-267 m3 (314-350 yd3) |
Struck | 188-213 m3 (246-290 yd3) |
Cooling System | 1160 l306 gal (US) |
Crankcase | 319 l84 gal (US) |
Steering Tank | 254 l67 gal (US) |
Steering System - Including Tank | 355 l94 gal (US) |
Brake Hoist System - Includes Tank | 1600 l441 gal (US) |
Brake/Hoist Hydraulic Lines | 830 l219 gal (US) |
Brake/Hoist Tank | 770 l203 gal (US) |
Differentials | 1176 l311 gal (US) |
Final Drive - Each | 185 l49 gal (US) |
Front Wheels - Each | 61 l16 gal (US) |
Fuel Tank | 3785 l1000 gal (US) |
Torque Converter Sump | 303 l80 gal (US) |
Torque Converter/Transmission System - Including Sump | 629 l166 gal (US) |
Tires | 59/80R63 – Michelin or Bridgestone |
Engine Guard Clearance - Loaded | 1025 mm3.33 ft |
Front Canopy Height - Empty | 7709 mm25.33 ft |
Height - Top of ROPS - Empty | 6526 mm21.4 ft |
Inside Body Depth - Maximum | 3363 mm11 ft |
Loaded Ground Clearance | 786 mm2.58 ft |
Loading Height - Empty | 6998 mm23 ft |
Overall Height - Body Raised | 15701 mm51.5 ft |
Rear Axle - Clearance - Loaded | 947 mm3.08 ft |
Overall Body Length | 14802 mm48.6 ft |
Inside Body Length | 9976 mm32.75 ft |
Overall Length | 15080 mm49.5 ft |
Wheel Base | 7195 mm23.58 ft |
Rear Axle - Tail | 3944 mm12.9 ft |
Dump Clearance | 2017 mm6.58 ft |
Centerline Front Tire Width | 6534 mm21.41 ft |
Overall Canopy Width | 9116 mm29.91 ft |
Outside Body Width | 9755 mm32 ft |
Inside Body Width | 8513 mm27.91 ft |
Centerline of Rear Dual Tire Width | 6233 mm20.41 ft |
Overall Tire Width | 9529 mm31.25 ft |
ROPS Standards | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
Sound Standards (1) | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394:2008 and 6396:2008 is 76 dB(A) for cab offered by Caterpillar when properly installed and maintained and tested with doors and windows closed. |
Steering Standards | ISO 5010:2007 |
Note | Consult your local Cat dealer for truck body recommendations. |
Emissions | U.S. EPA Compliant. Where applicable, the Cat C175-20 engine is compliant with U.S. EPA emission standards. |
Note (3) | No low altitude arrangement (LAA) engine derating required up to 2134 m (7,000 ft) altitude. |
Note (4) | No high altitude arrangement (HAA) engine derating required up to 4877 m (16,000 ft) altitude. |
Note | Double reduction, planetary with full floating axles. |
FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. |
Sound Standards (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
Note | Productive capabilities of the 797F are such that, under certain job conditions, TKPH (TMPH) capabilities of standard tires could be exceeded and, therefore, limit production. |
Note (1) | Refer to the Cat Mining Truck 10/10/20 Payload Policy for maximum gross machine weight limitations. |
Note (2) | Body weight varies depending on body and liner configuration. Weight range for known applications. |
Note (3) | Chassis weight with 100 percent fuel, hoist, body mounting group, rims and tires. |