Specifications

Get a Quote
CG170-16 K

Specifications

Maximum Continuous Rating 1500 ekW
Fuel Type Natural Gas, Biogas, Coal Gas
Maximum Electrical Efficiency 43.3%
Frequency 50 or 60 Hz
Speed 1500 or 1800 rpm
Engine Model CG170
Displacement 70.8 l4320 in³
Aspiration TA
Bore 170 mm6.7 in
Stroke 195 mm7.7 in
Length 6640 mm261.4 in
Width 1778 mm70 in
Height 2210 mm87 in
Dry Weight - Genset 14900 kg32848 lb

CG170-16 K Standard Equipment

  • Air Inlet
    • Two-element single-stage air cleaner with enclosure and service indicator
    • Turbocharger for the CG132-8 with a water-cooled bearing case
  • Control Panels
    • TEM(Total Electronic Management)
  • Exhaust
    • Closed crankcase ventilation system
    • PEARL/Low resistence exhaust system
  • Cooling
    • Jacket water and SCAC thermostats
    • Cat flanges on SCAC circuit
    • Electrical jacket water and aftercooler coolant pump
    • flange connections for JW inlet and outlet
    • Engine driven water pumps for jacket water and after cooler
    • Jacket water and SCAC thermostats
    • ANSI/DN customer flange connections for JW inlet and outlet
    • Cat flanges on SCAC circuit
  • Fuel system
    • Electronic fuel metering valve
    • Pre-chamber spark plugs
    • Independently controlled cylinder monitoring and ignition system
  • Generator
    • Reactive droop
    • Bus bar connections
    • Winding temperature detectors
    • Anti-condensation space heater
    • 3-phase sensing and KVAR/PF control
  • Starting/Charging
    • 24V starting motors
    • Battery disconnect switch
  • General
    • Crankshaft vibration damper and guard

CG170-16 K Optional Equipment

  • Air Inlet
    • Mounting stand
    • Air cleaner with precleaner
  • Cooling
    • CHP skid

Specifications

Maximum Continuous Rating 1500 ekW
Fuel Type Natural Gas, Biogas, Coal Gas
Maximum Electrical Efficiency 43.3%
Frequency 50 or 60 Hz
Speed 1500 or 1800 rpm
Engine Model CG170
Displacement 70.8 l4320 in³
Aspiration TA
Bore 170 mm6.7 in
Stroke 195 mm7.7 in
Length 6640 mm261.4 in
Width 1778 mm70 in
Height 2210 mm87 in
Dry Weight - Genset 14900 kg32848 lb

Equipment

CG170-16 K Standard Equipment

  • Air Inlet
    • Two-element single-stage air cleaner with enclosure and service indicator
    • Turbocharger for the CG132-8 with a water-cooled bearing case
  • Control Panels
    • TEM(Total Electronic Management)
  • Exhaust
    • Closed crankcase ventilation system
    • PEARL/Low resistence exhaust system
  • Cooling
    • Jacket water and SCAC thermostats
    • Cat flanges on SCAC circuit
    • Electrical jacket water and aftercooler coolant pump
    • flange connections for JW inlet and outlet
    • Engine driven water pumps for jacket water and after cooler
    • Jacket water and SCAC thermostats
    • ANSI/DN customer flange connections for JW inlet and outlet
    • Cat flanges on SCAC circuit
  • Fuel system
    • Electronic fuel metering valve
    • Pre-chamber spark plugs
    • Independently controlled cylinder monitoring and ignition system
  • Generator
    • Reactive droop
    • Bus bar connections
    • Winding temperature detectors
    • Anti-condensation space heater
    • 3-phase sensing and KVAR/PF control
  • Starting/Charging
    • 24V starting motors
    • Battery disconnect switch
  • General
    • Crankshaft vibration damper and guard

CG170-16 K Optional Equipment

  • Air Inlet
    • Mounting stand
    • Air cleaner with precleaner
  • Cooling
    • CHP skid

Related Products

CG170-16 K
Products
footer-border

© 2022 Caterpillar. All Rights Reserved. Cat, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Facebook YouTube LinkedIn
Model.GetDictionaryValue(