C27 ACERT™ (Dry Manifold) Standard Equipment

• Air Inlet System
  • Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection

• Control System
  • Electronic governing, PTO speed control
  • Programmable ratings
  • Cold mode start strategy
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and TEL
  • Electronic diagnostics and fault logging
  • Engine monitoring and protection system (speed, temperature, pressure)
  • J1939 Broadcast (diagnostic, engine status, and control)

• Cooling System
  • Thermostats and housing — outlet LH vertical orientation
  • Jacket water pump — gear-driven, centrifugal RH

• Exhaust System
  • Exhaust manifold — dry, heat shields
  • Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
  • Water-cooled center sections

• Flywheels and Flywheel Housings
  • SAE No. 0 or SAE No. 1
  • SAE standard rotation

• Fuel System
  • MEUI system
  • Fuel filter, RH ( 2 micron high performance)
  • Fuel transfer pump
  • Fuel priming pump (optional electric priming pump)

• Lube System
  • Crankcase breather — rear mounted
  • Oil cooler — RH
  • Side turbo — oil filler in RH front gear case
  • Rear turbo — oil filler in RH valve cover
  • Oil level gauge — RH
  • Oil filter — RH
  • Oil pan rear sump

• Mounting System
  • Front support — narrow

• Power Take-Offs
  • Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide

• General
  • Vibration damper
  • Paint — Cat yellow
  • Lifting eyes
  • Automatic variable timing, electronic
  • Electronic installation kit 70-pin connector (connectors, pins, sockets)

C27 ACERT™ (Dry Manifold) Optional Equipment

• Air Inlet System
  • Air lines
  • Air cleaners
  • Precleaners

• Charging System
  • Battery chargers
  • Charging alternators
  • Alternator mountings

• Circuit Breakers
  • Circuit breaker mounting

• Cooling System
  • Blower fans
  • Suction fans
  • Radiators

• Exhaust System
  • Muffler

• Fuel Systems
  • Electric fuel priming pump

• Instrumentation
  • Gauges and instrument panels

• Lube System
  • Lubricating oil
  • Oil pan
  • Oil filter

• Mounting System
  • Engine supports

• Power Take-Offs
  • Hydraulic pump drives
  • Pulley
  • Auxiliary drive

• Starting System
  • Electric starting motor
  • Battery sets - 24V
  • Battery cable
  • Battery rack
  • Starting aids

• Packaging
  • Overseas preservation
  • Storage preservation
  • Export packaging