3512C with DGB Standard Equipment

• Air Inlet System
  • Corrosion-resistant aftercooler core
  • Air Inlet shutoff
  • Regular duty air cleaner

• Control System
  • ADEM A3 ECU, left-hand mounted
  • Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls

• Cooling System
  • Caterpillar supplied radiator, 46/CVS-stacked 0.627 ratio, includes blower fan, fan drive, pulley, belt guard, coolant level sensor, regulator, and fuel cooler
  • Separate-circuit aftercooled
  • Outlet controlled jacket water thermostat
  • Jacket water pump - gear driven
  • Dual outlet
  • Aftercooler water pump - gear driven
  • Aftercooler water thermostat

• Exhaust System
  • Dry exhaust manifold
  • Dual turbochargers, water cooled bearings

• Flywheel and Housing
  • SAE No. 00 flywheel
  • SAE No. 00 flywheel housing
  • SAE standard rotation

• Fuel System
  • Fuel filter simplex (LH) with priming pump (LH)
  • Fuel transfer pump
  • Fuel return line with flexible connection
  • Electronic unit injectors

• Generator Attachments
  • Barrel-mounted petroleum terminal box with air filter and pressure differential switch

• Instrumentation
  • Emergency stop button
  • Analog gauges:
  • Service port connector
  • Customer connection terminal blocks

• EMCP 4.3 Control Panel
  • 140 mm (5.5 in) Graphical Display
  • Communication
  • Controls
  • Generator Set Protection
  • Outputs
  • Inputs
  • Other Features

• Lubrication System
  • Crankcase breather
  • Oil cooler
  • Shallow oil pan
  • Oil drain extension, 2 in NPT female connection
  • Simplex oil filter

• Mounting System
  • 4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide

• Protection System
  • Engine alarms, derate, and shutdown in abnormal operation

• Starting System
  • TDI air starting motor, RH - 1034 kPa (150 psi)

• General
  • Paint - Cat yellow

3512C with DGB Optional Equipment

• Air Inlet System
  • Heavy duty air cleaner
  • Remote air inlet adapter - rectangular
  • Remote air inlet adapter - round

• Control System
  • Engine control options:
  • Load sharing governor, 2301A

• Cooling System
  • Radiator options:
  • Coolant level sensor
  • Coolant conditioner
  • Cooling system connection options (for use with customer-supplied radiator):
  • Fan drive and belt guard (for use with remote and customersupplied radiators)
  • Fan pulley options (for use with customer-supplied radiator):

• Exhaust System
  • Exhaust expander 297 mm to 340 mm (11.7 in to 13.4 in)
  • Flexible fitting, 356 mm (14 in)
  • Elbow, 305 mm (12 in)
  • Muffler, 356 mm (14 in), spark arresting, includes companion flanges, clean-out box, and spark box
  • Muffler, 305 mm (12 in), spark arresting, includes companion flanges, clean-out box, and spark box

• Fuel System
  • Custom fuel filter
  • Primary fuel filter
  • Primary fuel filter with water separator

• Generator Attachments
  • Barrel-mounted petroleum terminal box
  • Current transformers (3)
  • Cable access box

• Instrumentation
  • Communications module PL1000T
  • Communications module PL1000E
  • Thermocouples installed, one per cylinder

• Lubrication System
  • Custom oil filter
  • RH installed centrifugal oil filter
  • SAE15W40, Caterpillar DEO, 500 hour
  • Crankcase fumes disposal
  • Oil level regulator

• Mounting System
  • Custom inner base
  • Custom outer base
  • Package isolator supports (3), for mounting inner base to customer-supplied base

• Power Take-off
  • Alternator, 24V, 68A

• Protection System
  • Explosion relief valves (3)
  • Metal particle detector switch
  • Metal particle detector with annunciator

• Starting System
  • Custom starting motor
  • Air pressure regulator

• General
  • LH installed engine barring group
  • Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
  • Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
  • Jacket water heater lines