Specifications

G3516B

Specifications

Minimum Rating1029 bkW1380 BHP
Maximum Rating1029 bkW1380 BHP
EmissionsNSPS Site Compliant Capable
Displacement69.3 l4230 in³
AspirationTurbocharged-2 Stage Aftercooled
Flywheel and Flywheel HousingSAE No. 00
Flywheel Teeth183
Weight - Dry8401 kg18520 lb
Oil Change Interval1000 hr
Ignition, ProtectionADEM™ A3
Stroke190 mm7.5 in
Bore170 mm6.7 in
Cooling System221.5 l58.5 gal (US)
Lube Oil System - Refill424 l112 gal (US)

G3516B Standard Equipment

  • Air Inlet System
    • Axial flow air cleaners
    • Service indicator
    • Cleanable
  • Cooling System
    • Two-stage charge air cooling:
    • Engine cooling and charge air cooling thermostats
  • Exhaust System
    • Dry exhaust manifolds and turbocharger housings
  • Flywheels and Housings
    • SAE 00 flywheel
    • SAE 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Electronic fuel metering valve
    • Requires 7-50 psig gas supply
    • Gas pressure regulator
    • Gas shutoff valve
  • Instrumentation
    • Remote-mounted Advisor control panel
    • Interconnect harness
  • Lube System
    • Top-mounted crankcase breathers
    • Oil cooler
    • Oil filter and oil sampling valve
    • Drain valve
    • Turbo oil accumulator
    • API B16.3 approved gas/air-driven pre-lube system
  • Torsional Vibration Analysis
    • Caterpillar provided
  • Mounting
    • Rails
  • Control Panels
    • 4" LCD Advisor display panel
    • Shipped loose
  • Starting System
    • 90 psi TDI starter
    • 150 psi TDI starter
  • Power Take-Offs
    • Front housing, two sided
    • Front lower LH accessory drive
  • Protection System — Display/Alarm/Shutdown
    • Low oil pressure
    • Oil filter differential pressure
    • High fuel or oil temperature
    • Engine oil to engine coolant
    • Differential temperature
    • High coolant temperature
    • Engine speed
    • Engine load
    • Battery voltage
    • Detonation
    • Manifold air temperature
    • Coolant JW inlet/outlet pressure
    • Left turbo inlet temperature
    • Right turbo inlet temperature
    • Cylinder port temperature
  • Protection System — Display Only
    • Service hours
    • Oxygen level
  • General
    • Paint — Cat yellow
    • Dual 23" vibration damper with guard
    • CSA Certification, Class 1 Division 2 Groups C and D

G3516B Optional Equipment

  • Air Inlet System
    • Rectangular air inlet adapter
    • Circular air inlet adapter
  • Charging System
    • Battery Charger 20 amp
  • Connections
    • Mechanical joint assembly
    • Inlet connection
  • Exhaust System
    • Flexible fittings available at first production build
    • Elbows and mufflers
  • Instrumentation
    • Optional interconnect harness
  • Lube System
    • Shipped with lube oil
  • Mounting System
    • Rails
  • Power Take-Offs
    • Front stub shaft
  • Literature
    • Options available

Specifications

Minimum Rating1029 bkW1380 BHP
Maximum Rating1029 bkW1380 BHP
EmissionsNSPS Site Compliant Capable
Displacement69.3 l4230 in³
AspirationTurbocharged-2 Stage Aftercooled
Flywheel and Flywheel HousingSAE No. 00
Flywheel Teeth183
Weight - Dry8401 kg18520 lb
Oil Change Interval1000 hr
Ignition, ProtectionADEM™ A3
Stroke190 mm7.5 in
Bore170 mm6.7 in
Cooling System221.5 l58.5 gal (US)
Lube Oil System - Refill424 l112 gal (US)

Equipment

G3516B Standard Equipment

  • Air Inlet System
    • Axial flow air cleaners
    • Service indicator
    • Cleanable
  • Cooling System
    • Two-stage charge air cooling:
    • Engine cooling and charge air cooling thermostats
  • Exhaust System
    • Dry exhaust manifolds and turbocharger housings
  • Flywheels and Housings
    • SAE 00 flywheel
    • SAE 00 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Electronic fuel metering valve
    • Requires 7-50 psig gas supply
    • Gas pressure regulator
    • Gas shutoff valve
  • Instrumentation
    • Remote-mounted Advisor control panel
    • Interconnect harness
  • Lube System
    • Top-mounted crankcase breathers
    • Oil cooler
    • Oil filter and oil sampling valve
    • Drain valve
    • Turbo oil accumulator
    • API B16.3 approved gas/air-driven pre-lube system
  • Torsional Vibration Analysis
    • Caterpillar provided
  • Mounting
    • Rails
  • Control Panels
    • 4" LCD Advisor display panel
    • Shipped loose
  • Starting System
    • 90 psi TDI starter
    • 150 psi TDI starter
  • Power Take-Offs
    • Front housing, two sided
    • Front lower LH accessory drive
  • Protection System — Display/Alarm/Shutdown
    • Low oil pressure
    • Oil filter differential pressure
    • High fuel or oil temperature
    • Engine oil to engine coolant
    • Differential temperature
    • High coolant temperature
    • Engine speed
    • Engine load
    • Battery voltage
    • Detonation
    • Manifold air temperature
    • Coolant JW inlet/outlet pressure
    • Left turbo inlet temperature
    • Right turbo inlet temperature
    • Cylinder port temperature
  • Protection System — Display Only
    • Service hours
    • Oxygen level
  • General
    • Paint — Cat yellow
    • Dual 23" vibration damper with guard
    • CSA Certification, Class 1 Division 2 Groups C and D

G3516B Optional Equipment

  • Air Inlet System
    • Rectangular air inlet adapter
    • Circular air inlet adapter
  • Charging System
    • Battery Charger 20 amp
  • Connections
    • Mechanical joint assembly
    • Inlet connection
  • Exhaust System
    • Flexible fittings available at first production build
    • Elbows and mufflers
  • Instrumentation
    • Optional interconnect harness
  • Lube System
    • Shipped with lube oil
  • Mounting System
    • Rails
  • Power Take-Offs
    • Front stub shaft
  • Literature
    • Options available

Related Products

Model.GetDictionaryValue(