Specifications

Get a Quote
C32 Tier 4 / IMO III

Specifications

Minimum Rating282 ekW
Maximum Rating940 ekW
Frequency60hz
Rated Engine Speed1800 rpm
ConfigurationVee-12, 4-stroke-Cycle-Diesel
AspirationTurbocharged-aftercooled aspiration
Bore145 mm5.71 in
Stroke162 mm6.38 in
Displacement32.1 l1959 in³
GovernorElectronic (A5 ECM)
EmissionsU.S. EPA Tier 4 Final certified / IMO III emissions certified (SCR required)
Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Engine Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
6 Brick U-Flow - Height597 mm23.5 in
6 Brick U-Flow - Length2159 mm85 in
6 Brick U-Flow - Weight560 kg1235 lb
6 Brick U-Flow - Width1445 mm56.9 in
6 Brick Z-Flow - Height597 mm23.5 in
6 Brick Z-Flow - Length3751 mm147.7 in
6 Brick Z-Flow - Weight565 kg1246 lb
6 Brick Z-Flow - Width1106 mm43.5 in
Dosing Cabinet - Height579 mm22.8 in
Dosing Cabinet - Length949 mm37.4 in
Dosing Cabinet - Weight95 kg209 lb
Dosing Cabinet - Width477 mm18.8 in
CoolingHeat exchanger, keel or radiator cooled
GeneratorSR5 - Form Wound
Oil Change Interval750 hrs
Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)

C32 Tier 4 / IMO III Standard Equipment

  • AIR INLET SYSTEM
    • Separate circuit aftercooled (SCAC)
    • Closed crankcase fumes disposal
  • CONTROL SYSTEM
    • 24V control system
  • COOLING SYSTEM
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • FUEL SYSTEM
    • Duplex fuel filters with hybrid fuel lines
    • Primary fuel filter with water separator installed on base frame
  • GENERATORS AND GENERATOR ATTACHMENTS
    • IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
  • LUBE SYSTEM
    • Oil fill, simplex filter and dipstick
  • MOUNTING SYSTEM
    • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
  • GENERAL
    • Right or left hand service sides
    • Customer wiring and service tool connector

C32 Tier 4 / IMO III Optional Equipment

  • ALARM AND PROTECTION
    • MGCP III B control panel with Cat® Alarm and Protection System
    • IP44 generator protection
  • EXHAUST SYSTEM
    • Muffler
    • Water-in-fuel and exhaust temperature sensors
    • SOLAS approved spray shielding
  • CHARGING SYSTEM
    • Charging alternator
  • FUEL SYSTEM
    • Manual or electric fuel priming pump
    • Fuel cooler
  • LUBE SYSTEM
    • Duplex oil filters
  • STARTING SYSTEM
    • Starting motors – air, electric or redundant

Specifications

Minimum Rating282 ekW
Maximum Rating940 ekW
Frequency60hz
Rated Engine Speed1800 rpm
ConfigurationVee-12, 4-stroke-Cycle-Diesel
AspirationTurbocharged-aftercooled aspiration
Bore145 mm5.71 in
Stroke162 mm6.38 in
Displacement32.1 l1959 in³
GovernorElectronic (A5 ECM)
EmissionsU.S. EPA Tier 4 Final certified / IMO III emissions certified (SCR required)
Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Engine Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
6 Brick U-Flow - Height597 mm23.5 in
6 Brick U-Flow - Length2159 mm85 in
6 Brick U-Flow - Weight560 kg1235 lb
6 Brick U-Flow - Width1445 mm56.9 in
6 Brick Z-Flow - Height597 mm23.5 in
6 Brick Z-Flow - Length3751 mm147.7 in
6 Brick Z-Flow - Weight565 kg1246 lb
6 Brick Z-Flow - Width1106 mm43.5 in
Dosing Cabinet - Height579 mm22.8 in
Dosing Cabinet - Length949 mm37.4 in
Dosing Cabinet - Weight95 kg209 lb
Dosing Cabinet - Width477 mm18.8 in
CoolingHeat exchanger, keel or radiator cooled
GeneratorSR5 - Form Wound
Oil Change Interval750 hrs
Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)

Equipment

C32 Tier 4 / IMO III Standard Equipment

  • AIR INLET SYSTEM
    • Separate circuit aftercooled (SCAC)
    • Closed crankcase fumes disposal
  • CONTROL SYSTEM
    • 24V control system
  • COOLING SYSTEM
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • FUEL SYSTEM
    • Duplex fuel filters with hybrid fuel lines
    • Primary fuel filter with water separator installed on base frame
  • GENERATORS AND GENERATOR ATTACHMENTS
    • IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
  • LUBE SYSTEM
    • Oil fill, simplex filter and dipstick
  • MOUNTING SYSTEM
    • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
  • GENERAL
    • Right or left hand service sides
    • Customer wiring and service tool connector

C32 Tier 4 / IMO III Optional Equipment

  • ALARM AND PROTECTION
    • MGCP III B control panel with Cat® Alarm and Protection System
    • IP44 generator protection
  • EXHAUST SYSTEM
    • Muffler
    • Water-in-fuel and exhaust temperature sensors
    • SOLAS approved spray shielding
  • CHARGING SYSTEM
    • Charging alternator
  • FUEL SYSTEM
    • Manual or electric fuel priming pump
    • Fuel cooler
  • LUBE SYSTEM
    • Duplex oil filters
  • STARTING SYSTEM
    • Starting motors – air, electric or redundant

Related Products

C32 Tier 4 / IMO III
Products
footer-border

© 2022 Caterpillar. All Rights Reserved. Cat, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Facebook YouTube LinkedIn
Model.GetDictionaryValue(