Specifications
Overview
The Cat
® C18 ACERT™ Industrial Power Unit is offered in ratings ranging from 429-470 bkW (575-630 bhp)@ 1800-1900 rpm. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
| Minimum Power | 429 bkW575 BHP |
| Maximum Power | 470 bkW630 BHP |
| Rated Speed | 1800-2000 rpm |
| Emissions | U.S. EPA Tier 4 Final, EU Stage IV nonroad emission standards. Designed to meet proposed EU Stage V nonroad emission standards. |
| Engine Configuration | Inline 6, 4-Stroke-Cycle Diesel |
| Bore | 145 mm (5.71 in) |
| Stroke | 183 mm (7.2 in) |
| Displacement | 18.1 L (1104.5 in³) |
| Aspiration | Turbocharged Aftercooled (TA) |
| Compression Ratio | 16:1 |
| Rotation from Flywheel End | Counterclockwise |
| Cooling System - Capacity | 26.9 L (28.4 qt) |
| Lube System - Refill | 40-74 L (42.3-78.1 qt) |
| Height | 1912-2006 mm (75.3-79 in) |
| Length | 2172-2532 mm (85.5-99.7 in) |
| Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C | 2113-2650 kg (4658-5842 lb) |
| Width | 1180-1241 mm (46.5-48.9 in) |
| Diameter | 330.2 mm (13 in) |
| Height | 468-652 mm (18-25.7 in) |
| Weight | 180-268 kg (397-590.8 lb) |
| Width | 762-1112 mm (30-43.8 in) |
| Height | 551 mm (21.7 in) |
| Length | 854 mm (33.6 in) |
| Volume Capacity | 48.4 L (51.1 qt) |
| Weight | 19.42 kg (42.8 lb) |
| Width | 287 mm (11.3 in) |
C18 ACERT™ Standard Equipment
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
- Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Remote fan control
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Cooling System
- Thermostats and housing, vertical outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
- Flywheels and Flywheel Housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
- Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
- Fuel System
- MEUI injection
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
- Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
- Power Take Off (PTO)
- SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
- General
- Paint: Caterpillar yellow, with optional colors available at request
- U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
- Cat Regeneration System
- Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- NOx Reduction System (NRS)
- Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
- Available in 12 volt or 24 volt systems
- U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment
- Cat Regeneration System
- Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Aftertreatment Electronic Control Unit (ECU)
- NOx Reduction System (NRS)
- Pump Electronic Control Unit (PETU)
- Selective Catalytic Reduction (SCR)
- Available in 12V or 24V systems
Reliable, Quiet and Durable Power
Reliable, Quiet and Durable Power
High Performance
Fuel Efficiency
Fuel & Oil
Broad Application Range
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
Tier 4 Final, Stage IV Aftertreatment Features
Tier 4 Final, Stage IV Aftertreatment Features
Specifications
| Minimum Power | 429 bkW575 BHP |
| Maximum Power | 470 bkW630 BHP |
| Rated Speed | 1800-2000 rpm |
| Emissions | U.S. EPA Tier 4 Final, EU Stage IV nonroad emission standards. Designed to meet proposed EU Stage V nonroad emission standards. |
| Engine Configuration | Inline 6, 4-Stroke-Cycle Diesel |
| Bore | 145 mm (5.71 in) |
| Stroke | 183 mm (7.2 in) |
| Displacement | 18.1 L (1104.5 in³) |
| Aspiration | Turbocharged Aftercooled (TA) |
| Compression Ratio | 16:1 |
| Rotation from Flywheel End | Counterclockwise |
| Cooling System - Capacity | 26.9 L (28.4 qt) |
| Lube System - Refill | 40-74 L (42.3-78.1 qt) |
| Height | 1912-2006 mm (75.3-79 in) |
| Length | 2172-2532 mm (85.5-99.7 in) |
| Weight - Approximate, Net Dry - Standard Configuration Without Oil, Cooling, Clutch, Compressor, A/C | 2113-2650 kg (4658-5842 lb) |
| Width | 1180-1241 mm (46.5-48.9 in) |
| Diameter | 330.2 mm (13 in) |
| Height | 468-652 mm (18-25.7 in) |
| Weight | 180-268 kg (397-590.8 lb) |
| Width | 762-1112 mm (30-43.8 in) |
| Height | 551 mm (21.7 in) |
| Length | 854 mm (33.6 in) |
| Volume Capacity | 48.4 L (51.1 qt) |
| Weight | 19.42 kg (42.8 lb) |
| Width | 287 mm (11.3 in) |
Equipment
C18 ACERT™ Standard Equipment
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
- Control System
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Remote fan control
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
- Integrated Electronic Control Unit (ECU)
- Cooling System
- Thermostats and housing, vertical outlet
- Centrifugal water pump
- Guidance on cooling system design available through your dealer to ensure equipment reliability
- Flywheels and Flywheel Housing
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
- Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
- Fuel System
- MEUI injection
- Primary fuel filter
- Secondary fuel filters
- Fuel transfer pump
- Electronic fuel priming
- Lube System
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Oil dipstick
- Gear driven oil pump
- Choice of front, rear or center sumps
- Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
- Power Take Off (PTO)
- SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
- General
- Paint: Caterpillar yellow, with optional colors available at request
- U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
- Cat Regeneration System
- Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- NOx Reduction System (NRS)
- Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
- Available in 12 volt or 24 volt systems
- U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment
- Cat Regeneration System
- Aftertreatment information applies to ratings from 429-522 bkW (575-700 bhp)
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Aftertreatment Electronic Control Unit (ECU)
- NOx Reduction System (NRS)
- Pump Electronic Control Unit (PETU)
- Selective Catalytic Reduction (SCR)
- Available in 12V or 24V systems
360° Interactive
Benefits and Features
Reliable, Quiet and Durable Power
Reliable, Quiet and Durable Power
High Performance
Fuel Efficiency
Fuel & Oil
Broad Application Range
World-class Product Support Offered Through Global Cat Dealer Network
World-class Product Support Offered Through Global Cat Dealer Network
Tier 4 Final, Stage IV Aftertreatment Features
Tier 4 Final, Stage IV Aftertreatment Features
Related Products
