Specifications
Overview
The Cat
® C15 ACERT™ Industrial Diesel Engine is offered in ratings ranging from 328-444 bkW (440-595 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, and EU Stage IIIA equivalent emission standards. Industries and applications powered by C15 ACERT engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Minimum Power | 328 bkW440 BHP |
Maximum Power | 444 bkW595 BHP |
Rated Speed | 1800-2100 rpm |
Emissions | China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent |
Engine Configuration | Inline 6, 4-Stroke-Cycle Diesel |
Bore | 137.2 mm (5.4 in) |
Stroke | 171.4 mm (6.75 in) |
Aspiration | Turbocharged Aftercooled (TA) |
Displacement | 15.2 L (927.56 in³) |
Compression Ratio | 18.0:1 |
Combustion System | Direct Injection |
Rotation from Flywheel End | Counterclockwise |
Height | 1226 mm (48.3 in) |
Height - Approximate | 1226 mm48.3 in |
Length | 1377 mm (54.2 in) |
Length - Approximate | 1377 mm54.2 in |
Weight - Net Dry - Basic Operating Engine Without Optional Attachments | 1469 kg (3239 lb) |
Width | 926 mm (36.5 in) |
Width - Approximate | 918.6 mm36.2 in |
C15 ACERT™ Standard Equipment
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
- Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
- Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
- Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
- Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- Fuel filter, tertiary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
- Lube System
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
- General
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
Specifications
Minimum Power | 328 bkW440 BHP |
Maximum Power | 444 bkW595 BHP |
Rated Speed | 1800-2100 rpm |
Emissions | China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent |
Engine Configuration | Inline 6, 4-Stroke-Cycle Diesel |
Bore | 137.2 mm (5.4 in) |
Stroke | 171.4 mm (6.75 in) |
Aspiration | Turbocharged Aftercooled (TA) |
Displacement | 15.2 L (927.56 in³) |
Compression Ratio | 18.0:1 |
Combustion System | Direct Injection |
Rotation from Flywheel End | Counterclockwise |
Height | 1226 mm (48.3 in) |
Height - Approximate | 1226 mm48.3 in |
Length | 1377 mm (54.2 in) |
Length - Approximate | 1377 mm54.2 in |
Weight - Net Dry - Basic Operating Engine Without Optional Attachments | 1469 kg (3239 lb) |
Width | 926 mm (36.5 in) |
Width - Approximate | 918.6 mm36.2 in |
Equipment
C15 ACERT™ Standard Equipment
- Air Inlet System
- Turbocharged
- Air-to-Air Aftercooled
- Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
- Cooling System
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
- Exhaust System
- Exhaust manifold, dry
- Optional exhaust outlet
- Flywheels and Flywheel Housing
- SAE No. 1 flywheel housing
- Fuel System
- MEUI injection
- Fuel filter, secondary (2 micron)
- Fuel filter, tertiary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
- Lube System
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
- General
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
360° Interactive
Related Products