Engine Model | Cat C3.3B DIT (turbo) |
Net Flywheel Power | 53.6 kW71.8 HP |
Gross Power - SAE J1995 | 55.4 kW74.3 HP |
Net Power - SAE 1349 | 53.6 kW71.8 HP |
Displacement | 3.3 l203 in³ |
Stroke | 120 mm4.7 in |
Bore | 94 mm3.7 in |
Net Power - ISO 9249 | 54.1 kW72.6 HP |
Net Power SAE 1349† | 54 kW72.4 HP |
Operating Weight | 3368 kg7424 lb |
Rated Operating Capacity | 975 kg2150 lb |
Breakout Force - Tilt Cylinder | 3336 kg7355 lb |
Rated Operating Capacity with Optional Counterweight | 1088 kg2400 lb |
Tipping Load | 1950 kg4300 lb |
Bucket Pin Height - Carry Position | 200 mm7.9 in |
Bucket Pin Height - Maximum Lift | 3154 mm124.2 in |
Bumper Overhang - Behind Rear Axle | 1083 mm42.6 in |
Clearance at Maximum Lift and Dump | 2465 mm97.1 in |
Departure Angle | 26° |
Ground Clearance | 226 mm8.9 in |
Height - Top of Cab | 2110 mm83.1 in |
Length - With Bucket on Ground | 3708 mm146 in |
Length - Without Bucket | 2993 mm117.8 in |
Maximum Dump Angle | 39° |
Maximum Overall Height | 4032 mm158.7 in |
Maximum Reach - With Arms Parallel to Ground | 1388 mm54.6 in |
Rack Back Angle - Maximum Height | 96° |
Reach - Maximum Lift/Dump | 600 mm23.6 in |
Turning Radius from Center - Bucket | 2181 mm85.9 in |
Turning Radius from Center - Coupler | 1401 mm55.2 in |
Turning Radius from Center - Machine Rear | 1806 mm71.2 in |
Vehicle Width over Tires | 1676 mm66 in |
Wheel Base | 1249 mm49.2 in |
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) | 57 kW76 HP |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow | 121 l/min32 gal/min |
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure | 28000 kPa4061 psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 33 kW44 HP |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 86 l/min23 gal/min |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 23000 kPa3335 psi |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
Travel Speed - Forward or Reverse - One Speed | 12.5 km/h7.7 mile/h |
Travel Speed - Forward or Reverse - Two Speed Option | 17.7 km/h11 mile/h |
Cooling System | 14 l3.7 gal (US) |
Engine Crankcase | 11 l3 gal (US) |
Fuel Tank | 94 l24.8 gal (US) |
Hydraulic System | 52 l13.7 gal (US) |
Hydraulic Tank | 39 l10.3 gal (US) |
Chain Box - Each Side | 12.7 l3.3 gal (US) |
Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Net Power ISO 9249† | 54.6 kW73.2 HP |
Note | †Tier 4 Interim equivalent engine offered only for Australia/New Zealand, Macedonia, Ukraine and South Korea. |
Peak Torque - 1,600 rpm - SAE J1995 | 265 N·m195 ft·lbf |
Inside Cab** | 81 dB(A)81 dB(A) |
Note (1) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
Note (2) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab*** | 101 dB(A)101 dB(A) |
Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Rated Operating Capacity | 975 kg2150 lb |
Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (66 in) dirt bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |