| Engine Model | Cat C2.2 |
| Net Flywheel Power | 44 kW58.9 HP |
| Gross Power - SAE J1995 | 44.9 kW60.2 HP |
| Net Power - SAE 1349 | 44 kW58.9 HP |
| Displacement | 2.2 l134.3 in³ |
| Stroke | 100 mm3.9 in |
| Bore | 84 mm3.3 in |
| Net Power - ISO 9249 | 44.4 kW59.6 HP |
| Peak Torque - 1,500 rpm - SAE J1995 | 183 N·m135 ft·lbf |
| Operating Weight | 2818 kg6213 lb |
| Rated Operating Capacity | 839 kg1850 lb |
| Breakout Force - Tilt Cylinder | 1807 kg3984 lb |
| Rated Operating Capacity with Optional Counterweight | 885 kg1950 lb |
| Tipping Load | 1679 kg3700 lb |
| Bucket Pin Height - Carry Position | 214 mm8.4 in |
| Bucket Pin Height - Maximum Lift | 3001 mm118.1 in |
| Bucket Pin Reach - Maximum Lift | 224 mm8.8 in |
| Bumper Overhang - Behind Rear Axle | 894 mm35.2 in |
| Clearance at Maximum Lift and Dump | 2254 mm88.7 in |
| Departure Angle | 27.9° |
| Ground Clearance | 170 mm6.7 in |
| Height - Top of Cab | 2029 mm79.9 in |
| Length - With Bucket on Ground | 3233 mm127.3 in |
| Length - Without Bucket | 2523 mm99.3 in |
| Maximum Dump Angle | 47.4° |
| Maximum Overall Height | 3832 mm150.9 in |
| Maximum Reach - With Arms Parallel to Ground | 1249 mm49.2 in |
| Rack Back Angle - Maximum Height | 88.2° |
| Reach - Maximum Lift/Dump | 653 mm25.7 in |
| Turning Radius from Center - Bucket | 1976 mm77.8 in |
| Turning Radius from Center - Coupler | 1102 mm43.4 in |
| Turning Radius from Center - Machine Rear | 1513 mm59.6 in |
| Vehicle Width over Tires | 1497 mm58.9 in |
| Wheel Base | 1054 mm41.5 in |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 38 kW50.9 HP |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 99 l/min26 gal/min |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 23000 kPa3336 psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 26.5 kW35.5 HP |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 69 l/min18 gal/min |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 23000 kPa3336 psi |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 Level II |
| Travel Speed - Forward or Reverse - One Speed | 12.3 km/h7.6 mile/h |
| Travel Speed - Forward or Reverse - Two Speed Option | 17.8 km/h11.1 mile/h |
| Cooling System | 12 l3.2 gal (US) |
| Engine Crankcase | 10 l2.6 gal (US) |
| Fuel Tank | 57 l15.1 gal (US) |
| Hydraulic System | 45 l11.9 gal (US) |
| Hydraulic Tank | 34 l9 gal (US) |
| Chain Box - Each Side | 7 l1.8 gal (US) |
| Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Inside Cab** | 83 dB(A)83 dB(A) |
| Note (1) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Note (2) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab*** | 101 dB(A)101 dB(A) |
| Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Rated Operating Capacity | 839 kg1850 lb |
| Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
Carriage Height
934 mm36.8 in
Carriage Width
1164 mm45.8 in
Carriage Weight
96 kg211.6 lb
Carriage Height
934 mm36.8 in
Carriage Width
1164 mm45.8 in
Carriage Weight
96 kg211.6 lb
Height - Grapples Closed
770 mm30.3 in
Jaw Opening
876 mm34.5 in
Exposed Fork Tine Length
637 mm25 in
Overall Width
1575 mm62 in
Cutting Width
1524 mm60 in
Optimal Hydraulic Pressure
150-230 bar (2176-3340 psi)
Overall Width
1880 mm74 in
Cutting Width
1829 mm72 in
Optimal Hydraulic Pressure
150-230 bar (2176-3340 psi)
Optimal Hydraulic Flow
42-86 L/min (11-23 gpm)
Interface Type
Skid Steer Coupler
Overall Width
2637 mm104 in
Optimal Hydraulic Flow
42-86 L/min (11-23 gpm)
Interface Type
Skid Steer Coupler
Overall Width
2637 mm104 in
Capacity
1.33 m³1.74 yd³
Width
2649 mm104 in
Weight
418 kg921.5 lb
Capacity
0.3 m³0.39 yd³
Width
1576 mm62 in
Weight
371 kg817.9 lb
Capacity
0.43 m³0.56 yd³
Width
2187 mm86 in
Weight
462 kg1018.5 lb
Capacity
0.4 m³0.52 yd³
Width
2035 mm80 in
Weight
440 kg970 lb
Capacity
0.37 m³0.48 yd³
Width
1883 mm74 in
Weight
416 kg917.1 lb
Capacity
0.34 m³0.44 yd³
Width
1730 mm68 in
Weight
394 kg868.6 lb
Capacity
0.3 m³0.39 yd³
Width
1586 mm62 in
Weight
386 kg851 lb
Capacity
0.34 m³0.44 yd³
Width
1730 mm68 in
Weight
411 kg906.1 lb
Capacity
0.37 m³0.48 yd³
Width
1883 mm74 in
Weight
436 kg961.2 lb
Capacity
0.4 m³0.52 yd³
Width
2035 mm80 in
Weight
461 kg1016.3 lb
Capacity
0.43 m³0.56 yd³
Width
2187 mm86 in
Weight
486 kg1071.4 lb
Width
1730 mm68 in
Height - Grapples Closed
525 mm20.7 in
Jaw Opening
1016 mm40 in
Width
1883 mm74 in
Height - Grapples Closed
525 mm20.7 in
Jaw Opening
1016 mm40 in
Width
2035 mm80 in
Height - Grapples Closed
525 mm20.7 in
Jaw Opening
1016 mm40 in
Overall Width
1316 mm52 in
Maximum Load Rating
907 kg2000 lb
Maximum Horizontal Reach
2134 mm84 in
Roller Width
2134 mm84 in
Overall Width
2362 mm93 in
Maximum Angle - Right or Left
20 degrees
Roller Width
1829 mm72 in
Overall Width
2057 mm81 in
Maximum Angle - Right or Left
20 degrees
Roller Width
1829 mm72 in
Overall Width
2057 mm81 in
Maximum Angle - Right or Left
20 degrees
Roller Width
2134 mm84 in
Overall Width
2362 mm93 in
Maximum Angle - Right or Left
20 degrees
Roller Width
2286 mm90 in
Overall Width
2515 mm99 in
Maximum Angle - Right or Left
20 degrees
Optimal Hydraulic Flow
80-117 L/min (21-31 gpm)
Optimal Hydraulic Pressure
160-240 bar (2320-3480 psi)
Maximum Cutting Depth
150 mm6 in
Optimal Hydraulic Flow
60-80 L/min (16-21 gpm)
Optimal Hydraulic Pressure
230 bar (3330 psi)
Maximum Cutting Depth
150 mm6 in
Cutting Wheel Diameter - With Teeth
547 mm22 in
Cutting Depth - Below Ground
521 mm20.5 in
Cutting Head Extension
280 mm11 in
Cutting Wheel Diameter - With Teeth
547 mm22 in
Cutting Depth - Below Ground
521 mm20.5 in
Cutting Head Extension
280 mm11 in
| Engine Model | Cat C2.2 |
| Net Flywheel Power | 44 kW58.9 HP |
| Gross Power - SAE J1995 | 44.9 kW60.2 HP |
| Net Power - SAE 1349 | 44 kW58.9 HP |
| Displacement | 2.2 l134.3 in³ |
| Stroke | 100 mm3.9 in |
| Bore | 84 mm3.3 in |
| Net Power - ISO 9249 | 44.4 kW59.6 HP |
| Peak Torque - 1,500 rpm - SAE J1995 | 183 N·m135 ft·lbf |
| Operating Weight | 2818 kg6213 lb |
| Rated Operating Capacity | 839 kg1850 lb |
| Breakout Force - Tilt Cylinder | 1807 kg3984 lb |
| Rated Operating Capacity with Optional Counterweight | 885 kg1950 lb |
| Tipping Load | 1679 kg3700 lb |
| Bucket Pin Height - Carry Position | 214 mm8.4 in |
| Bucket Pin Height - Maximum Lift | 3001 mm118.1 in |
| Bucket Pin Reach - Maximum Lift | 224 mm8.8 in |
| Bumper Overhang - Behind Rear Axle | 894 mm35.2 in |
| Clearance at Maximum Lift and Dump | 2254 mm88.7 in |
| Departure Angle | 27.9° |
| Ground Clearance | 170 mm6.7 in |
| Height - Top of Cab | 2029 mm79.9 in |
| Length - With Bucket on Ground | 3233 mm127.3 in |
| Length - Without Bucket | 2523 mm99.3 in |
| Maximum Dump Angle | 47.4° |
| Maximum Overall Height | 3832 mm150.9 in |
| Maximum Reach - With Arms Parallel to Ground | 1249 mm49.2 in |
| Rack Back Angle - Maximum Height | 88.2° |
| Reach - Maximum Lift/Dump | 653 mm25.7 in |
| Turning Radius from Center - Bucket | 1976 mm77.8 in |
| Turning Radius from Center - Coupler | 1102 mm43.4 in |
| Turning Radius from Center - Machine Rear | 1513 mm59.6 in |
| Vehicle Width over Tires | 1497 mm58.9 in |
| Wheel Base | 1054 mm41.5 in |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 38 kW50.9 HP |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow | 99 l/min26 gal/min |
| Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure | 23000 kPa3336 psi |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 26.5 kW35.5 HP |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 69 l/min18 gal/min |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 23000 kPa3336 psi |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 Level II |
| Travel Speed - Forward or Reverse - One Speed | 12.3 km/h7.6 mile/h |
| Travel Speed - Forward or Reverse - Two Speed Option | 17.8 km/h11.1 mile/h |
| Cooling System | 12 l3.2 gal (US) |
| Engine Crankcase | 10 l2.6 gal (US) |
| Fuel Tank | 57 l15.1 gal (US) |
| Hydraulic System | 45 l11.9 gal (US) |
| Hydraulic Tank | 34 l9 gal (US) |
| Chain Box - Each Side | 7 l1.8 gal (US) |
| Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Inside Cab** | 83 dB(A)83 dB(A) |
| Note (1) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Note (2) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab*** | 101 dB(A)101 dB(A) |
| Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Rated Operating Capacity | 839 kg1850 lb |
| Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1524 mm (60 in) dirt bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C0 cab (OROPS, static seat), 880 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
Carriage Height
934 mm36.8 in
Carriage Width
1164 mm45.8 in
Carriage Weight
96 kg211.6 lb
Carriage Height
934 mm36.8 in
Carriage Width
1164 mm45.8 in
Carriage Weight
96 kg211.6 lb
Height - Grapples Closed
770 mm30.3 in
Jaw Opening
876 mm34.5 in
Exposed Fork Tine Length
637 mm25 in
Overall Width
1575 mm62 in
Cutting Width
1524 mm60 in
Optimal Hydraulic Pressure
150-230 bar (2176-3340 psi)
Overall Width
1880 mm74 in
Cutting Width
1829 mm72 in
Optimal Hydraulic Pressure
150-230 bar (2176-3340 psi)
Optimal Hydraulic Flow
42-86 L/min (11-23 gpm)
Interface Type
Skid Steer Coupler
Overall Width
2637 mm104 in
Optimal Hydraulic Flow
42-86 L/min (11-23 gpm)
Interface Type
Skid Steer Coupler
Overall Width
2637 mm104 in
Capacity
1.33 m³1.74 yd³
Width
2649 mm104 in
Weight
418 kg921.5 lb
Capacity
0.3 m³0.39 yd³
Width
1576 mm62 in
Weight
371 kg817.9 lb
Capacity
0.43 m³0.56 yd³
Width
2187 mm86 in
Weight
462 kg1018.5 lb
Capacity
0.4 m³0.52 yd³
Width
2035 mm80 in
Weight
440 kg970 lb
Capacity
0.37 m³0.48 yd³
Width
1883 mm74 in
Weight
416 kg917.1 lb
Capacity
0.34 m³0.44 yd³
Width
1730 mm68 in
Weight
394 kg868.6 lb
Capacity
0.3 m³0.39 yd³
Width
1586 mm62 in
Weight
386 kg851 lb
Capacity
0.34 m³0.44 yd³
Width
1730 mm68 in
Weight
411 kg906.1 lb
Capacity
0.37 m³0.48 yd³
Width
1883 mm74 in
Weight
436 kg961.2 lb
Capacity
0.4 m³0.52 yd³
Width
2035 mm80 in
Weight
461 kg1016.3 lb
Capacity
0.43 m³0.56 yd³
Width
2187 mm86 in
Weight
486 kg1071.4 lb
Width
1730 mm68 in
Height - Grapples Closed
525 mm20.7 in
Jaw Opening
1016 mm40 in
Width
1883 mm74 in
Height - Grapples Closed
525 mm20.7 in
Jaw Opening
1016 mm40 in
Width
2035 mm80 in
Height - Grapples Closed
525 mm20.7 in
Jaw Opening
1016 mm40 in
Overall Width
1316 mm52 in
Maximum Load Rating
907 kg2000 lb
Maximum Horizontal Reach
2134 mm84 in
Roller Width
2134 mm84 in
Overall Width
2362 mm93 in
Maximum Angle - Right or Left
20 degrees
Roller Width
1829 mm72 in
Overall Width
2057 mm81 in
Maximum Angle - Right or Left
20 degrees
Roller Width
1829 mm72 in
Overall Width
2057 mm81 in
Maximum Angle - Right or Left
20 degrees
Roller Width
2134 mm84 in
Overall Width
2362 mm93 in
Maximum Angle - Right or Left
20 degrees
Roller Width
2286 mm90 in
Overall Width
2515 mm99 in
Maximum Angle - Right or Left
20 degrees
Optimal Hydraulic Flow
80-117 L/min (21-31 gpm)
Optimal Hydraulic Pressure
160-240 bar (2320-3480 psi)
Maximum Cutting Depth
150 mm6 in
Optimal Hydraulic Flow
60-80 L/min (16-21 gpm)
Optimal Hydraulic Pressure
230 bar (3330 psi)
Maximum Cutting Depth
150 mm6 in
Cutting Wheel Diameter - With Teeth
547 mm22 in
Cutting Depth - Below Ground
521 mm20.5 in
Cutting Head Extension
280 mm11 in
Cutting Wheel Diameter - With Teeth
547 mm22 in
Cutting Depth - Below Ground
521 mm20.5 in
Cutting Head Extension
280 mm11 in
