Specifications

Get a Quote
D9R
Emissions Optional U.S. EPA Tier 1 Equivalent
Note * Excludes all fan losses.
Engine Model Cat® 3408C
Flywheel Power 302 kW405 HP
Bore 137 mm5.4 in
Stroke 152 mm6 in
Displacement 18 l1099 in³
Engine Power - Gross Power - SAE J1995* 330 kW443 HP
Engine Power - Net Power - SAE J1349/ISO 9249 302 kW405 HP
Net Power - SAE J1349/ISO 9249 302 kW405 HP
Operating Weight 48784 kg107550 lb
Shipping Weight 36154 kg79705 lb
1 Forward 3.9 km/h2.4 mile/h
2 Forward 6.8 km/h4.2 mile/h
3 Forward 11.9 km/h7.4 mile/h
1 Reverse 4.7 km/h2.9 mile/h
2 Reverse 8.4 km/h5.2 mile/h
3 Reverse 14.7 km/h9.1 mile/h
1 Forward - Drawbar Pull 725000 N163000 lbf
2 Forward - Drawbar Pull 400000 N90000 lbf
3 Forward - Drawbar Pull 218000 N49000 lbf
Pump Type Piston-type geared from flywheel
Pump Output - Implement 239 l/min63.1 gal/min
Tilt Cylinder Flow - Rod End Flow 137 l/min36.4 gal/min
Tilt Cylinder Flow - Head End Flow 167 l/min44.2 gal/min
Bulldozer Relief Valve Setting 26200 kPa3800 psi
Tilt Cylinder Relief Valve Setting 19300 kPa2800 psi
Ripper - Lift - Relief Valve Setting 26200 kPa3800 psi
Ripper - Pitch - Relief Valve Setting 26200 kPa3800 psi
Shoe Type Extreme Service
Width - Shoe 610 mm24 in
Shoes/Side 43
Pitch 240 mm9.44 in
Ground Clearance 596 mm23.4 in
Track Gauge 2250 mm88.6 in
Length - Track on Ground 3470 mm136.6 in
Ground Contact Area 4.24 m²6569 in²
Track Rollers/Side 8
Grouser Height - Extreme Service (ES) 84 mm3.3 in
Fuel Tank 889 l235 gal (US)
Cooling System 163 l43 gal (US)
Engine Crankcase* 45.5 l12 gal (US)
Power Train 164 l43.4 gal (US)
Final Drive - Each 15 l3.9 gal (US)
Roller Frames - Each 45 l11.9 gal (US)
Pivot Shaft Compartment 30 l7.9 gal (US)
Hydraulic Tank 77.2 l20.4 gal (US)
Capacity - SAE J1265 13.5 m³17.7 yd³
Digging Depth 606 mm23.9 in
Ground Clearance 1422 mm56 in
Height 1934 mm6.35 ft
Maximum Tilt 940 mm37 in
Total Operating Weight** - With Blade and Single-Shank Ripper 48784 kg107550 lb
Weight* - Without Hydraulic Controls 6863 kg15130 lb
Width - Over End Bits 4310 mm14.14 ft
Capacity - SAE J1265 16.4 m³21.4 yd³
Digging Depth 606 mm23.9 in
Ground Clearance 1422 mm56 in
Height 1934 mm6.35 ft
Maximum Tilt 1014 mm39.9 in
Total Operating Weight** - With Blade and Single-Shank Ripper 49392 kg108890.59 lb
Weight* - Without Hydraulic Controls 7388 kg16288 lb
Width - Over End Bits 4650 mm15.25 ft
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 882 mm/817 mm (34.7 in/32.2 in)
Maximum Penetration - Standard Tip 1231 mm/1727 mm (48.5 in/68 in)
Maximum Penetration Force - Shank Vertical 158 kN/172 kN (35,520 lbf/38,667 lbf)
Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Note (2) Single-shank ripping arrangement weight includes pin puller.
Number of Shank Holes 3-Mar
Overall Beam Width NA
Pry-Out Force 332 kN/331 kN (74,637 lbf/74,412 lbf)
Total Operating Weight* - With SU-Blade and Ripper 48784 kg107550 lb
Weight - With One Shank 4293 kg/4420 kg (9,464 lb/9,744 lb)
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 879 mm34.6 in
Maximum Penetration - Standard Tip 798 mm31.4 in
Maximum Penetration Force - Shank Vertical 154 kN34621 lbf
Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Number of Shank Holes 2
Overall Beam Width 1330 mm52.4 in
Pry-Out Force - Multi-Shank Ripper with One Tooth 361 kN81156 lbf
Total Operating Weight* - With SU-Blade and Ripper 48221 kg106309 lb
Weight - With One Shank 4153 kg9156 lb
Winch Model PA140VS
Weight* 1790 kg3950 lb
Oil Capacity 15 l4 gal (US)
Increased Tractor Length 557 mm21.9 in
Drum Width 320 mm12.6 in
Wire Cable Diameter - Optional 32 mm1.25 in
Wire Cable Diameter - Recommended 28 mm1.13 in
Note (1) * Includes blade tilt cylinder.
Note (2) ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Note (1) * Includes blade tilt cylinder.
Note (2) ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Drawbar Height (Center of Clevis)* 765 mm30.1 in
Ground Clearance* 596 mm23.4 in
Height - FOPS Cab* 3820 mm150.4 in
Height - ROPS/Canopy* 4000 mm157.5 in
Height - Top of Stack* 4005 mm157.7 in
Length - Basic Tractor - With Drawbar 5180 mm204 in
Length - Basic Tractor - With Winch 5545 mm218.3 in
Length - Track on Ground 3470 mm136.6 in
Length - With Multi-Shank Ripper 6538 mm257.4 in
Length - With SU-Blade** 6880 mm270.9 in
Length - With Single-Shank Ripper 6529 mm257 in
Length - With U-Blade 6967 mm274.3 in
Note (1) *Includes grouser height for total dimensions on hard surfaces.
Note (2) **Includes drawbar.
Overall Length - Basic Tractor 4910 mm193.3 in
Overall Length - SU-Blade/SS Ripper 8230 mm324 in
Track Gauge 2250 mm88.6 in
Width - Over Trunnions 3300 mm129.9 in
Width - Without Trunnions - Standard Shoe 2880 mm113.4 in
Engine Power - EU 80/1269 302 kW405 HP
Note (1) Capable of meeting U.S. EPA Tier 1 Equivalent.
Note (2) Engine ratings apply at 1,900 rpm.
Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (4) No derating required up to 2286 m (7,500 ft) altitude.
Note (1) Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
Note (2) Complete system consists of pump, tank with filter, valves, lines, linkage and control levers.
Note (2) +Includes (1) shank, add 347 kg for each additional shank.
Note * With oil filters.
FOPS FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
Note Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.
ROPS ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Sound The declared dynamic operator sound pressure level is 85 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed.
Note Positive Pin Retention Track.
Note (1) Operating Weight: Includes clutch/brake arrangement, lubricant, coolant, 100% fuel, hydraulic controls and fluids, 610 mm (24 in) extreme service shoes, SU-Blade, single-shank ripper, ROPS, FOPS cab and operator.
Note (2) Shipping Weight: Includes clutch/brake arrangement, lubricants, coolant, 20% fuel and ROPS, FOPS cab and 610 mm (24 in) extreme service shoes.
Maximum Drum Capacity - Optional Cable Length 62 m204 ft
Maximum Drum Capacity - Recommended Cable Length 78 m257 ft
Note (1) * Weight: Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2) Variable speed, hydraulically driven, dual braking system, three‑roller fairlead.
Wire Cable Ferrule Size - Length 70 mm2.8 in
Wire Cable Ferrule Size - Outside Diameter 60 mm2.4 in
Brakes Brakes meet the standard ISO 10265.

D9R Standard Equipment

  • ELECTRICAL
    • Alternator, 75 amp
    • Back-up alarm
    • Batteries, 12-volt (2), 190 amp-hour
    • Converter, 10-volt, 10 amp
    • Horn, forward warning
    • Lighting system: – Two on fender facing forward – Two on fender facing rearward – Two on top of the lift cylinders
    • Starting receptacle
  • OPERATOR ENVIRONMENT
    • Canopy, ROPS/FOPS
    • Cat D9R Monitoring System
    • Decelerator and governor control
    • Heater
    • Hydraulic control lever restraints
    • Hydraulic system, four valve
    • Mirror, rearview
    • Seat, cloth with mechanical suspension
    • Seat belt, retractable 76 mm (3 in)
  • UNDERCARRIAGE
    • 610 mm (24 in) extreme service grouser with sealed and lubricated PPR track (43 section)
    • Lifetime lubricated rollers and idlers
    • Pinned equalizer bar with remote greasing location
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage, eight-roller tubular track roller frame
    • Track adjusters, hydraulic
    • Track guides
    • Two-piece master links
  • POWER TRAIN
    • 3408C DITA diesel engine
    • Advanced Modular Cooling System (AMOCS)
    • Blower fan
    • Clutch-brake with combined steering and brake control levers
    • Coolant, extended life
    • Drains, ecology fluid
    • Final drives, three planet double reduction planetary
    • Fuel priming pump
    • Muffler
    • Power shift transmission (3F/3R)
    • Precleaner with dust ejector
    • Prescreener
    • Separator, water/fuel
    • Thermal shield
    • Torque divider
  • OTHER STANDARD EQUIPMENT
    • CD ROM parts book
    • Engine enclosure
    • Guards – bottom, hinged extreme service with front towing device
    • Hinged radiator guard doors
    • Load sensing hydraulics
    • Mounting, lift cylinders
    • Rain cap
    • Service instructions, international
    • Vandalism protection (8 caplocks)

D9R Optional Equipment

  • ELECTRICAL
    • Alternator, 105 amp
    • Battery: – Arctic (includes four batteries) – Heavy Duty (includes four batteries)
    • Converter, 24-volt to 12-volt (includes 20 amp converter)
    • Lights, 10 halogen: – Two on fender facing forward – Two on fender facing rearward – Four on top of lift cylinders – Two on sides of ROPS facing rearward
  • GUARDS
    • Dozer lines
    • Fuel tank
    • Rear screen
    • Undercarriage idlers
  • OPERATOR ENVIRONMENT
    • Air conditioner (under hood, fender or ROPS)
    • Cab (standard, arctic or steel mill)
    • Seat: – Vinyl seat with mechanical suspension – Cloth seat with air suspension
  • POWER TRAIN
    • 3408C, U.S. EPA Tier 1 Equivalent
    • Coolant – arctic
    • Ether starting aid
    • Fan: – Desert – Reversible
    • Fast fuel system
    • Final drives: – Guarded – Cold weather – Steel mill
    • Grid, radiator core protector: – Grid, coated radiator core protector
    • Lubrication: – Arctic – High ambient – Steel mill
    • Precleaner, turbine or turbine with screen
    • Prelube engine
    • Radiator: – Copper-nickel (in conditions with airborne abrasive materials) – High ambient
  • UNDERCARRIAGE
    • Tracks, PPR, sealed and lubricated
    • 560 mm (22 in) Extreme Service
    • 610 mm (24 in) Extreme Service circular holes
    • 610 mm (24 in) Super Extreme Service
    • 610 mm (24 in) Super Extreme Service Steel Mill
    • 685 mm (27 in) Extreme Service
    • 685 mm (27 in) Extreme Service circular holes
    • 685 mm (27 in) Super Extreme Service
    • 760 mm (30 in) Moderate Service
    • Carrier rollers
    • Carrier rollers, cold weather
    • Undercarriage arrangements: – Cold weather – Steel mill
  • SPECIAL ARRANGEMENTS
    • Arctic
    • Desert
    • Heavy construction
    • Steel mill
  • BULLDOZER ARRANGEMENTS
    • 9SU blade
    • 9SU abrasion resistant blade
    • 9SU abrasion resistant blade, black
    • 9U blade
    • 9U abrasion resistant blade
    • 9U abrasion resistant blade, black
  • HYDRAULIC CONTROLS
    • Dual tilt
  • REAR ATTACHMENTS
    • Counterweight
    • Drawbar rear
    • Single shank ripper
    • Multi shank ripper
    • Multi shank ripper – steel mill
    • Pin puller (single shank only)
    • CapSure Hammerless Installation and Positive Retention System: – Single shank – Multi shank – Single shank deep
    • Winch
  • OTHER ATTACHMENTS
    • Cellular Product Link
    • Fuel lines, heater
    • High speed oil change system
    • Paint: – Black paint on hood and top of radiator guard – Corrosion resistant

Exterior

Interior

Specifications

Emissions Optional U.S. EPA Tier 1 Equivalent
Note * Excludes all fan losses.
Engine Model Cat® 3408C
Flywheel Power 302 kW405 HP
Bore 137 mm5.4 in
Stroke 152 mm6 in
Displacement 18 l1099 in³
Engine Power - Gross Power - SAE J1995* 330 kW443 HP
Engine Power - Net Power - SAE J1349/ISO 9249 302 kW405 HP
Net Power - SAE J1349/ISO 9249 302 kW405 HP
Operating Weight 48784 kg107550 lb
Shipping Weight 36154 kg79705 lb
1 Forward 3.9 km/h2.4 mile/h
2 Forward 6.8 km/h4.2 mile/h
3 Forward 11.9 km/h7.4 mile/h
1 Reverse 4.7 km/h2.9 mile/h
2 Reverse 8.4 km/h5.2 mile/h
3 Reverse 14.7 km/h9.1 mile/h
1 Forward - Drawbar Pull 725000 N163000 lbf
2 Forward - Drawbar Pull 400000 N90000 lbf
3 Forward - Drawbar Pull 218000 N49000 lbf
Pump Type Piston-type geared from flywheel
Pump Output - Implement 239 l/min63.1 gal/min
Tilt Cylinder Flow - Rod End Flow 137 l/min36.4 gal/min
Tilt Cylinder Flow - Head End Flow 167 l/min44.2 gal/min
Bulldozer Relief Valve Setting 26200 kPa3800 psi
Tilt Cylinder Relief Valve Setting 19300 kPa2800 psi
Ripper - Lift - Relief Valve Setting 26200 kPa3800 psi
Ripper - Pitch - Relief Valve Setting 26200 kPa3800 psi
Shoe Type Extreme Service
Width - Shoe 610 mm24 in
Shoes/Side 43
Pitch 240 mm9.44 in
Ground Clearance 596 mm23.4 in
Track Gauge 2250 mm88.6 in
Length - Track on Ground 3470 mm136.6 in
Ground Contact Area 4.24 m²6569 in²
Track Rollers/Side 8
Grouser Height - Extreme Service (ES) 84 mm3.3 in
Fuel Tank 889 l235 gal (US)
Cooling System 163 l43 gal (US)
Engine Crankcase* 45.5 l12 gal (US)
Power Train 164 l43.4 gal (US)
Final Drive - Each 15 l3.9 gal (US)
Roller Frames - Each 45 l11.9 gal (US)
Pivot Shaft Compartment 30 l7.9 gal (US)
Hydraulic Tank 77.2 l20.4 gal (US)
Capacity - SAE J1265 13.5 m³17.7 yd³
Digging Depth 606 mm23.9 in
Ground Clearance 1422 mm56 in
Height 1934 mm6.35 ft
Maximum Tilt 940 mm37 in
Total Operating Weight** - With Blade and Single-Shank Ripper 48784 kg107550 lb
Weight* - Without Hydraulic Controls 6863 kg15130 lb
Width - Over End Bits 4310 mm14.14 ft
Capacity - SAE J1265 16.4 m³21.4 yd³
Digging Depth 606 mm23.9 in
Ground Clearance 1422 mm56 in
Height 1934 mm6.35 ft
Maximum Tilt 1014 mm39.9 in
Total Operating Weight** - With Blade and Single-Shank Ripper 49392 kg108890.59 lb
Weight* - Without Hydraulic Controls 7388 kg16288 lb
Width - Over End Bits 4650 mm15.25 ft
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 882 mm/817 mm (34.7 in/32.2 in)
Maximum Penetration - Standard Tip 1231 mm/1727 mm (48.5 in/68 in)
Maximum Penetration Force - Shank Vertical 158 kN/172 kN (35,520 lbf/38,667 lbf)
Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Note (2) Single-shank ripping arrangement weight includes pin puller.
Number of Shank Holes 3-Mar
Overall Beam Width NA
Pry-Out Force 332 kN/331 kN (74,637 lbf/74,412 lbf)
Total Operating Weight* - With SU-Blade and Ripper 48784 kg107550 lb
Weight - With One Shank 4293 kg/4420 kg (9,464 lb/9,744 lb)
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 879 mm34.6 in
Maximum Penetration - Standard Tip 798 mm31.4 in
Maximum Penetration Force - Shank Vertical 154 kN34621 lbf
Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Number of Shank Holes 2
Overall Beam Width 1330 mm52.4 in
Pry-Out Force - Multi-Shank Ripper with One Tooth 361 kN81156 lbf
Total Operating Weight* - With SU-Blade and Ripper 48221 kg106309 lb
Weight - With One Shank 4153 kg9156 lb
Winch Model PA140VS
Weight* 1790 kg3950 lb
Oil Capacity 15 l4 gal (US)
Increased Tractor Length 557 mm21.9 in
Drum Width 320 mm12.6 in
Wire Cable Diameter - Optional 32 mm1.25 in
Wire Cable Diameter - Recommended 28 mm1.13 in
Note (1) * Includes blade tilt cylinder.
Note (2) ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Note (1) * Includes blade tilt cylinder.
Note (2) ** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Drawbar Height (Center of Clevis)* 765 mm30.1 in
Ground Clearance* 596 mm23.4 in
Height - FOPS Cab* 3820 mm150.4 in
Height - ROPS/Canopy* 4000 mm157.5 in
Height - Top of Stack* 4005 mm157.7 in
Length - Basic Tractor - With Drawbar 5180 mm204 in
Length - Basic Tractor - With Winch 5545 mm218.3 in
Length - Track on Ground 3470 mm136.6 in
Length - With Multi-Shank Ripper 6538 mm257.4 in
Length - With SU-Blade** 6880 mm270.9 in
Length - With Single-Shank Ripper 6529 mm257 in
Length - With U-Blade 6967 mm274.3 in
Note (1) *Includes grouser height for total dimensions on hard surfaces.
Note (2) **Includes drawbar.
Overall Length - Basic Tractor 4910 mm193.3 in
Overall Length - SU-Blade/SS Ripper 8230 mm324 in
Track Gauge 2250 mm88.6 in
Width - Over Trunnions 3300 mm129.9 in
Width - Without Trunnions - Standard Shoe 2880 mm113.4 in
Engine Power - EU 80/1269 302 kW405 HP
Note (1) Capable of meeting U.S. EPA Tier 1 Equivalent.
Note (2) Engine ratings apply at 1,900 rpm.
Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (4) No derating required up to 2286 m (7,500 ft) altitude.
Note (1) Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi).
Note (2) Complete system consists of pump, tank with filter, valves, lines, linkage and control levers.
Note (2) +Includes (1) shank, add 347 kg for each additional shank.
Note * With oil filters.
FOPS FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
Note Hearing protection may be needed when the machine is operated with an open operator station for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment.
ROPS ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Sound The declared dynamic operator sound pressure level is 85 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 100% of the maximum engine cooling fan speed. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed.
Note Positive Pin Retention Track.
Note (1) Operating Weight: Includes clutch/brake arrangement, lubricant, coolant, 100% fuel, hydraulic controls and fluids, 610 mm (24 in) extreme service shoes, SU-Blade, single-shank ripper, ROPS, FOPS cab and operator.
Note (2) Shipping Weight: Includes clutch/brake arrangement, lubricants, coolant, 20% fuel and ROPS, FOPS cab and 610 mm (24 in) extreme service shoes.
Maximum Drum Capacity - Optional Cable Length 62 m204 ft
Maximum Drum Capacity - Recommended Cable Length 78 m257 ft
Note (1) * Weight: Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2) Variable speed, hydraulically driven, dual braking system, three‑roller fairlead.
Wire Cable Ferrule Size - Length 70 mm2.8 in
Wire Cable Ferrule Size - Outside Diameter 60 mm2.4 in
Brakes Brakes meet the standard ISO 10265.

Equipment

D9R Standard Equipment

  • ELECTRICAL
    • Alternator, 75 amp
    • Back-up alarm
    • Batteries, 12-volt (2), 190 amp-hour
    • Converter, 10-volt, 10 amp
    • Horn, forward warning
    • Lighting system: – Two on fender facing forward – Two on fender facing rearward – Two on top of the lift cylinders
    • Starting receptacle
  • OPERATOR ENVIRONMENT
    • Canopy, ROPS/FOPS
    • Cat D9R Monitoring System
    • Decelerator and governor control
    • Heater
    • Hydraulic control lever restraints
    • Hydraulic system, four valve
    • Mirror, rearview
    • Seat, cloth with mechanical suspension
    • Seat belt, retractable 76 mm (3 in)
  • UNDERCARRIAGE
    • 610 mm (24 in) extreme service grouser with sealed and lubricated PPR track (43 section)
    • Lifetime lubricated rollers and idlers
    • Pinned equalizer bar with remote greasing location
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage, eight-roller tubular track roller frame
    • Track adjusters, hydraulic
    • Track guides
    • Two-piece master links
  • POWER TRAIN
    • 3408C DITA diesel engine
    • Advanced Modular Cooling System (AMOCS)
    • Blower fan
    • Clutch-brake with combined steering and brake control levers
    • Coolant, extended life
    • Drains, ecology fluid
    • Final drives, three planet double reduction planetary
    • Fuel priming pump
    • Muffler
    • Power shift transmission (3F/3R)
    • Precleaner with dust ejector
    • Prescreener
    • Separator, water/fuel
    • Thermal shield
    • Torque divider
  • OTHER STANDARD EQUIPMENT
    • CD ROM parts book
    • Engine enclosure
    • Guards – bottom, hinged extreme service with front towing device
    • Hinged radiator guard doors
    • Load sensing hydraulics
    • Mounting, lift cylinders
    • Rain cap
    • Service instructions, international
    • Vandalism protection (8 caplocks)

D9R Optional Equipment

  • ELECTRICAL
    • Alternator, 105 amp
    • Battery: – Arctic (includes four batteries) – Heavy Duty (includes four batteries)
    • Converter, 24-volt to 12-volt (includes 20 amp converter)
    • Lights, 10 halogen: – Two on fender facing forward – Two on fender facing rearward – Four on top of lift cylinders – Two on sides of ROPS facing rearward
  • GUARDS
    • Dozer lines
    • Fuel tank
    • Rear screen
    • Undercarriage idlers
  • OPERATOR ENVIRONMENT
    • Air conditioner (under hood, fender or ROPS)
    • Cab (standard, arctic or steel mill)
    • Seat: – Vinyl seat with mechanical suspension – Cloth seat with air suspension
  • POWER TRAIN
    • 3408C, U.S. EPA Tier 1 Equivalent
    • Coolant – arctic
    • Ether starting aid
    • Fan: – Desert – Reversible
    • Fast fuel system
    • Final drives: – Guarded – Cold weather – Steel mill
    • Grid, radiator core protector: – Grid, coated radiator core protector
    • Lubrication: – Arctic – High ambient – Steel mill
    • Precleaner, turbine or turbine with screen
    • Prelube engine
    • Radiator: – Copper-nickel (in conditions with airborne abrasive materials) – High ambient
  • UNDERCARRIAGE
    • Tracks, PPR, sealed and lubricated
    • 560 mm (22 in) Extreme Service
    • 610 mm (24 in) Extreme Service circular holes
    • 610 mm (24 in) Super Extreme Service
    • 610 mm (24 in) Super Extreme Service Steel Mill
    • 685 mm (27 in) Extreme Service
    • 685 mm (27 in) Extreme Service circular holes
    • 685 mm (27 in) Super Extreme Service
    • 760 mm (30 in) Moderate Service
    • Carrier rollers
    • Carrier rollers, cold weather
    • Undercarriage arrangements: – Cold weather – Steel mill
  • SPECIAL ARRANGEMENTS
    • Arctic
    • Desert
    • Heavy construction
    • Steel mill
  • BULLDOZER ARRANGEMENTS
    • 9SU blade
    • 9SU abrasion resistant blade
    • 9SU abrasion resistant blade, black
    • 9U blade
    • 9U abrasion resistant blade
    • 9U abrasion resistant blade, black
  • HYDRAULIC CONTROLS
    • Dual tilt
  • REAR ATTACHMENTS
    • Counterweight
    • Drawbar rear
    • Single shank ripper
    • Multi shank ripper
    • Multi shank ripper – steel mill
    • Pin puller (single shank only)
    • CapSure Hammerless Installation and Positive Retention System: – Single shank – Multi shank – Single shank deep
    • Winch
  • OTHER ATTACHMENTS
    • Cellular Product Link
    • Fuel lines, heater
    • High speed oil change system
    • Paint: – Black paint on hood and top of radiator guard – Corrosion resistant

360° Interactive

Exterior

Interior

Related Products

D9R
Products
footer-border

© 2022 Caterpillar. All Rights Reserved. Cat, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Facebook YouTube LinkedIn
Model.GetDictionaryValue(