Bit Load | Up to 16 964 kg (37,400 lb) |
Hole Diameter | Up to 127-200 mm (5.0-7.87 in) |
Engine | C18® ACERT™ @ 1,800 rpm |
U.S. EPA Tier 2 Equivalent - Engine | C18 ACERT @ 1,800 rpm |
U.S. EPA Tier 2 Equivalent - Emissions | U.S. EPA Tier 2 equivalent |
U.S. EPA Tier 2 Equivalent - Rated Horsepower | 361 kW484 HP |
U.S. EPA Tier 2 Equivalent - Elevation Capability | 4572 m15000 ft |
U.S. EPA Tier 4 Final - Engine | C18 ACERT @ 1,800 rpm |
U.S. EPA Tier 4 Final - Emissions | U.S. EPA Tier 4 Final |
U.S. EPA Tier 4 Final - Rated Horse Power | 354 kW475 HP |
U.S. EPA Tier 4 Final - Elevation Capability | 3658 m12000 ft |
Compressor - Rotary Drilling | 32.6 m³/min (1,150 ft³/min) @ 8.6 bar (125 psi) |
Angle Drilling Available | 30° to –15° in 5° increments |
DTH Drilling | Includes tool lubrication system |
Rotary Drilling | Optional tool lubrication system |
Note | With the compressor’s electronic compressor controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both compressor packages are configured with this feature. |
Choice (1) | Low pressure 8.6 bar (125 psi) |
Choice (2) | High pressure 24.1 bar (350 psi) |
Components (1) | Coolers with easy cleaning access |
Components (2) | Replaceable cooler core sections |
Components (3) | Functional in ambient temperature of up to 52° C (125° F) |
Components (4) | Automatic variable speed fan control |
Climate Level 1 Standard Fluids and Lubricants (1) | Rated down to –1° C (30° F) |
Climate Level 1 Standard Fluids and Lubricants (2) | Withstands high heat up to 52° C (125° F) |
Climate Level 2 Arctic Fluids and Lubricants | Rated down to –18°C (0°F) |
Features (1) | Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life |
Features (2) | Slip resistant walkways |
Features (3) | Fuel tank capacity 833 L (220 gal) |
Components (1) | Three leveling jacks provide leveling on a 7° bench (any orientation) |
Components (2) | Heavy duty tow hooks (front end) |
Components (3) | Four (4) lift lugs, for use with cables or chains |
Choice (1) | Fixed access ladders to the cab area |
Choice (2) | Small platform to the cab with access ladders |
Components (1) | Drill pipe thread greaser with remote fill tank or disposable grease bucket |
Model | Cat 336 Excavator type |
Ground Clearance | 533 mm21 in |
Carrier Rollers | Three (double post) |
Triple Grousers (1) | 600 mm (23.6 in); 1.44 bar (20.8 psi) ground pressure |
Components (1) | Auxiliary circuit pump |
Components (2) | Fan pump |
Components (3) | Two primary pumps |
Components (4) | Charge pump |
Components (5) | Wiring for third party interface |
11 m (36 ft) Mast Standard Drilling - Bit load (single-pass) | 16964 kg37400 lb |
11 m (36 ft) Mast Standard Drilling - Hoist capacity | Up to 11 907 kg (Up to 26,250 lb) |
11 m (36 ft) Mast Standard Drilling - Hoist speed | 1.32 m/s4.3 ft/s |
11 m (36 ft) Mast Standard Drilling - Hole depth range - Multi-pass depth | Down to 47.5 m (Down to 156 ft) |
11 m (36 ft) Mast Standard Drilling - Hole depth range - Single-pass depth | 11 m36 ft |
11 m (36 ft) Mast Standard Drilling - Hole diameter range | 127-200 mm (5.0-7.87 in) |
11 m (36 ft) Mast Standard Drilling - Pull-down capacity | Up to 15 876 kg (Up to 35,000 lb) |
Compressor - DTH Drilling | 29.7 m³/min (1,050 ft³/min) @ 24.1 bar (350 psi) |
DTH Drilling - 1050 cfm/350 psi | 29.7 m³/min (1,050 ft³/min) @ 24.1 bar (350 psi) includes 113 L (30 gal) tool oiler |
Rotary or DTH drilling, connection point for foam injection - 1150 cfm/125 psi | 32.6 m³/min (1,150 ft³/min) @ 8.6 bar (125 psi) |
Body length | 9.65 m31.66 ft |
Height mast down | 3.5 m11.5 ft |
Height mast up | 16.535 m54.25 ft |
Length mast down | 17.6 m57.66 ft |
Mast only length | 15.721 m51.58 ft |
Note | *For width with platform access to cab or service platform walkway contact the factory. |
Width cab end* | 3.6 m11.75 ft |
Width non-cab end | 3.6 m11.75 ft |
9.1 m (30 ft) pipes for 11 m (36 ft) Mast - Accepts quantity of four (4) - Option 1 | 101 mm4 in |
9.1 m (30 ft) pipes for 11 m (36 ft) Mast - Accepts quantity of four (4) - Option 2 | 114 mm4.5 in |
9.1 m (30 ft) pipes for 11 m (36 ft) Mast - Accepts quantity of four (4) - Option 3 | 127 mm5 in |
9.1 m (30 ft) pipes for 11 m (36 ft) Mast - Accepts quantity of four (4) - Option 4 | 140 mm5.5 in |
9.1 m (30 ft) pipes for 11 m (36 ft) Mast - Accepts quantity of four (4) - Option 5 | 152 mm6 in |
High Volume Water Injection - Maximum - Tank Above Deck - Capacity | 757 l200 gal (US) |
High Volume Water Injection - Maximum - Tank Below Deck - Capacity (Insulated for Extreme Cold Weather) | 757 l200 gal (US) |
Water Injection - Tank Mounted Below Front Deck - Components | Water flow meter, volume control, tank fill level indicator |
Water Injection - Tank Mounted Below Front Deck - Feature | Self-purging for winterization |
Feature (1) | Dual starter motors |
Feature (2) | Ether starting aid |
Feature (3) | Common air intake filters provide +500 hour service interval in normal operating conditions |
Feature (4) | Tier 4 Final package complete with DEF/Engine Shutdown Control Package |
Choice (3) | Platform access to the cab with full length service access walkway also with access ladders and self-closing gates |
Components (5) | Oil sampling ports |
11 m (36 ft) Mast - Hoist | Up to 11 907 kg (Up to 26,250 lb) |
11 m (36 ft) Mast - Multi-pass depth | Down to 47.5 m (Down to 156 ft) |
11 m (36 ft) Mast - Pulldown - rated single cylinder pull-down/hoist system | Up to 15 876 kg (Up to 35,000 lb) |
11 m (36 ft) Mast - Single-pass depth | 11 m36 ft |
Features (1) | CE compliant |
Features (2) | CSA certifiable |
Features (3) | EAEU certifiable |
Features (4) | CSA certified |
Features (5) | MDG15 and MDG41 aligned |
Components (7) | Drill tool lubricator is included with selection of DTH Compressor |
Components (7) | Drill tool lubricator (optional) |
Components (1) | Track chain guards and guides |
Features (1) | Pipe carousel: – 11 m (36 ft) Mast: Accepts quantity of four (4) 9.1 m (30 ft) pipes |
Features (2) | Pre-split angle drilling package for negative angle (–15 to 30°) in 5° increments |
Features (3) | Standard angle drilling package for (0 to 30°) in 5° increments |
Features (4) | Hydraulically actuated, self-indexing pipe carousel accepts various pipe diameters |
Features (5) | Bit changes are above deck level |
Features (6) | Single cylinder pulldown/hoist system |
Features (7) | Deck wrench fits flats of corresponding drill pipe diameters and DTH hammer |
Features (8) | Configured with roller deck bushing (for low pressure/tricone drilling) |
Features (9) | Two-piece deck bushing (for high pressure DTH drilling) |
Features (10) | Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating |
Features (11) | Variable hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in) |
Features (12) | Closed circuit camera mounted in mast to view pipe carousel/top drive operation |
Features (13) | Pipe positioner for angle drilling, multi-pass pipe handling |
Features (14) | Manual pipe catcher – One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket |
Components (1) | One-piece roller deck bushing |
Components (2) | Pipe positioner clamps |
Components (3) | Deck wrench |
Components (4) | Bit sub |
Components (5) | Top sub |
Components (6) | Pipe wiper seal |
Components (1) | Two-piece bushing |
Components (2) | Pipe positioner clamps |
Components (3) | Deck wrench |
Components (4) | Shock sub |
Components (5) | Cross over subs |
Components (6) | Pipe wiper seal |
Torque - Single Motor | 11700 N·m8629 lb/ft |
Rotation Speed | 0-150 rpm |
Components (1) | Output shaft with box-end API-IF (NC46) 101 mm (4 in) thread |
Components (2) | Rotary torque control |
Components (3) | Virtual rotary head travel interlocks |
Cab Design | – Compact FOPS cab has 1.9 m² (20.5 ft²) floor space with an integrated operator station – Cab rubber shock-mounts absorb mechanical vibration – Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) screens; color, high-definition and 12 volt power port – Additional display screen for cc cameras; color, high-definition 254 mm (10 in) – Power convertor 24V to 12V – Radio-ready for communication and entertainment stereo – Two swing out doors and Cat keyed locks – Literature holder – Storage area suitable for lunchbox |
Cab Packages | – Standard configuration includes a fabric seat, removable floor mat, single pane window glass and driller window guard – Premium configuration includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass and driller window guard |
Seating | – Seat swivels, locks and has two point retractable/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) |
Windows | – Large windows front, rear and right cab side; full length drill window with guard – Window shades (option) – Windshield wiper with a common washer tank – Manometer Pressure Gauge (option) |
Lighting | – LED interior lights, backlit joysticks and keypads – Flood lights for the drill perimeter; area spotlights – Lighting is 4,200 lumens – Mast beacon and tram clearance light |
HVAC | – Floor heating vent – Filter access from deck, 500 hour service interval – Defogging HVAC vents on main window |
Cameras | – Three (3) CC cameras (front and left side) providing 360° vision coverage from operators seat; camera on the mast to view pipe carousel/top drive operation |
Components (1) | All electric controls for drilling, tramming, leveling plus auxiliary functions |
Components (2) | Rotary torque control |
Components (3) | Virtual rotary head travel stops |
Components (4) | Pipe positioner engaged/disengaged indicator |
Components (5) | Drill depth meter |
Components (6) | Drill performance and display system |
Components (7) | Delayed engine shut down |
Components (8) | Filter indicators for hydraulic, fuel, compressor and engine |
Components (9) | Jack pressure sensors shown |
Components (10) | Data logging of machine health with warnings and fault code records with export capability |
Components (11) | Dust suppression control |
Components (12) | Mast lock indicator |
Components (13) | ECM proportional fan speed control system |
Components (14) | Tram interlock, machine stability limits |
Components (15) | Tram interlock, pipe in hole |
Components (16) | Tram interlock, mast up and locked or down and parked |
Components (17) | Tram interlock, jacks retracted |
Components (18) | Tram interlock, winch parked |
Components (19) | Cab environment controls (AC, heat, fan speeds) |
Components (20) | Pre wired for Terrain and Autonomous Operation |
Type (1) | Autonomous ready |
Components (1) | Drill depth meter |
Components (2) | Drill Assist (auto level, auto retract jacks, auto raise and lower mast, single-pass rotary auto drill) |
Components (3) | Cat Terrain ready |
Components (4) | Product Link Elite™ – Satellite, Cellular, Dual (options) |
Water Injection - Tank Mounted Below Front Deck | 757 l200 gal (US) |
High Volume Water Injection - Maximum - Tanks Total Capacity | 1514 l400 gal (US) |
Water Injection plus Dust Collector (1) | 76.5 m³/min (2,700 ft³/min) dust collector; includes standard water injection |
Water Injection plus Dust Collector (2) | Self-cleaning filters, dust chute clean-out door |
Choices (1) | Static dust curtains, four sides boxed enclosed |
Choices (2) | Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector) |
Choices (3) | Tram off spray system (option) |
Feature (1) | Approach angle of 15 degrees facilitates loading and unloading on a lowboy |
Components (1) | Seven (7) emergency stop buttons |
Components (2) | Hinged window guard over the full length of the front drill window |
Components (3) | Conditional safety interlocks |
Components (4) | Self-closing gates |
Components (5) | Electric horn activated by push button in the cab |
Components (6) | Automatic tram alarm with yellow strobe light |
Components (7) | Battery disconnect and starter switches can be locked out |
Components (8) | Air hose retention devices |
Components (9) | Slip resistant platform surfaces |
Components (10) | Machine lifting provisions |
Components (11) | FOPS Certified Operator Cab |
Package (1) | Basic – Centralized manual lubrication for all pivot points, gravity fill for fuel and water |
Package (2) | Standard – Automated lubrication system, fast fill for fuel and water |
Package (3) | Premium – Automated lubrication system, fast fill fuel and water, service center for lubricant drain, plus fill blowdown hose |
Working Weight Range | 37 500-41 700 kg (82,700-92,000 lb) |