Engine Model | Cat C3.3B DIT (turbo) |
Net Power | 53.8 kW72.1 HP |
Gross Power - SAE J1995 | 55.4 kW74.3 HP |
Net Power - SAE 1349 | 53.8 kW72.1 HP |
Displacement | 3.3 l203 in³ |
Bore | 94 mm3.7 in |
Stroke | 120 mm4.7 in |
Net Power SAE 1349† | 54.2 kW72.7 HP |
Operating Weight - 320 mm/12.6 in Tracks | 4013 kg8846 lb |
Rated Operating Capacities - 50% Tipping Load | 1315 kg2900 lb |
Breakout Force - Tilt Cylinder | 2284 kg5035 lb |
Ground Contact Area - With 320 mm/12.6 in Track | 0.96 m²1483 in² |
Rated Operating Capacities - 35% Tipping Load | 921 kg2030 lb |
Rated Operating Capacity with Optional Counterweight | 1406 kg3100 lb |
Tipping Load | 2631 kg5800 lb |
Bucket Pin Height - Carry Position | 198 mm7.8 in |
Bucket Pin Height - Maximum Lift | 3075 mm121 in |
Clearance at Maximum Lift and Dump | 2283 mm89.9 in |
Departure Angle | 35° |
Ground Clearance | 226 mm8.9 in |
Height - Top of Cab | 2111 mm83.1 in |
Length - Track on Ground | 1499 mm59 in |
Length - With Bucket on Ground | 3486 mm137.3 in |
Length - Without Bucket | 2767 mm108.9 in |
Maximum Dump Angle | 52° |
Maximum Overall Height | 3915 mm154.1 in |
Maximum Reach - With Arms Parallel to Ground | 1305 mm51.4 in |
Overall Length - Track | 1999 mm78.7 in |
Rack Back Angle - Maximum Height | 87° |
Reach - Maximum Lift/Dump | 608 mm23.9 in |
Turning Radius from Center - Bucket | 2184 mm86 in |
Turning Radius from Center - Coupler | 1392 mm54.8 in |
Turning Radius from Center - Machine Rear | 1561 mm61.5 in |
Vehicle Width (320 mm/12.6 in tracks) | 1676 mm66 in |
Vehicle Width (400 mm/15.7 in tracks) | 1755 mm69 in |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 43 kW58 HP |
Hydraulic Flow - High Flow - Loader Hydraulic Flow | 112 l/min30 gal/min |
Hydraulic Flow - High Flow - Loader Hydraulic Pressure | 23000 kPa3335 psi |
Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 29 kW39 HP |
Hydraulic Flow - Standard - Loader Hydraulic Flow | 76 l/min20 gal/min |
Hydraulic Flow - Standard - Loader Hydraulic Pressure | 23000 kPa3335 psi |
ROPS | ISO 3471:2008 |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
Travel Speed - Forward or Reverse - One Speed | 9.5 km/h5.9 mile/h |
Travel Speed - Forward or Reverse - Two Speed | 13.7 km/h8.5 mile/h |
Cooling System | 14 l3.7 gal (US) |
Engine Crankcase | 11 l3 gal (US) |
Fuel Tank | 105 l27.7 gal (US) |
Hydraulic System | 50 l13.2 gal (US) |
Hydraulic Tank | 39 l10.3 gal (US) |
Bucket Pin Reach - Maximum Lift | 238 mm9.4 in |
Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Net Power - ISO 9249 | 54.3 kW72.8 HP |
Net Power ISO 9249† | 54.8 kW73.5 HP |
Note | †Tier 4 Interim equivalent engine offered only for Australia/New Zealand, Macedonia, Ukraine and South Korea. |
Peak Torque - 1,600 rpm - SAE J1995 | 265 N·m195 ft·lbf |
Inside Cab** | 83 dB(A)83 dB(A) |
Note (1) | **The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
Note (2) | ***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Outside Cab*** | 103 dB(A)103 dB(A) |
Ground Contact Area - With 400 mm/15.7 in Track | 1.19 m²1848 in² |
Ground Pressure - With 320 mm/12.6 in Track | 41.1 kPa6 psi |
Ground Pressure - With 400 mm/15.7 in Track | 33.4 kPa4.8 psi |
Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Rated Operating Capacities - 50% Tipping Load | 1315 kg2900 lb |
Note | *Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Operating Weight - 400 mm/15.7 in Tracks | 4057 kg8945 lb |