Power - Net | 66 kW88 HP |
Operating Weight - Nominal | 7990 kg17615 lb |
Operating Weight - Maximum | 8760 kg19312 lb |
Model | Cat 3054C Mechanical Turbo |
Emissions | Engine meets U.S. EPA Tier 2/EU Stage II equivalent emission standards. |
Rated Power (Standard) - 2,200 rpm - Gross - ISO 14396 | 68.5 kW93 HP |
Net Power - 2,200 rpm - ISO 9249 | 66 kW88 HP |
Net Peak Power - 2,000 rpm - SAE J1349 | 65 kW87 HP |
Net Peak Power - 2,000 rpm - ISO 9249 | 65 kW88 HP |
Net Peak Power - 2,000 rpm - EEC 80/1269 | 65 kW88 HP |
Torque Rise - 1,200 rpm - Net | 38% |
Maximum Torque - 1,400 rpm | 394 N·m291 ft·lbf |
Bore | 105 mm4.1 in |
Stroke | 127 mm5 in |
Displacement | 4.4 l268.5 in³ |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
Note (2) | No derating required up to 2286 m altitude. Auto derate protects hydraulic and transmission systems. |
Type | Closed Center |
Pump Type | Variable Flow, Axial Piston |
Maximum Pump Capacity | 132 l/min34.9 gal/min |
System Pressure - Backhoe | 250 bar3626 psi |
System Pressure - Loader | 250 bar3626 psi |
Inside Cab | 80 dB(A)80 dB(A) |
Outside Cab | 104 dB(A)104 dB(A) |
Note | Travel speeds of Two Wheel Drive backhoe loader at full throttle, when equipped with 16.9×28 rear tires. |
Power Shuttle Transmission - Forward 1st | 5.5 km/h3.4 mile/h |
Power Shuttle Transmission - Forward 2nd | 9 km/h5.6 mile/h |
Power Shuttle Transmission - Forward 3rd | 20.7 km/h12.9 mile/h |
Power Shuttle Transmission - Forward 4th | 40 km/h24.9 mile/h |
Power Shuttle Transmission - Reverse 1st | 5.5 km/h3.4 mile/h |
Power Shuttle Transmission - Reverse 2nd | 9 km/h5.6 mile/h |
Power Shuttle Transmission - Reverse 3rd | 20.7 km/h12.9 mile/h |
Power Shuttle Transmission - Reverse 4th | 40 km/h24.9 mile/h |
Cooling System | 22 l5.8 gal (US) |
Fuel Tank | 160 l42.3 gal (US) |
Engine Oil - With Filter | 8.8 l2.3 gal (US) |
Transmission - Power Shuttle - AWD | 15 l4 gal (US) |
Rear Axle | 14.5 l3.8 gal (US) |
Rear Axle - Planetaries | 1.5 l0.4 gal (US) |
Front Axle (AWD) | 11 l2.9 gal (US) |
Front Axle (AWD) - Planetaries | 0.7 l0.2 gal (US) |
Hydraulic System | 106 l28 gal (US) |
Hydraulic Tank | 40 l10.6 gal (US) |
Operating Weight - Estimated | 7990 kg17615 lb |
Operating Weight - ROPS Capacity - Maximum | 8760 kg19312 lb |
Counterweights - Base | 115 kg254 lb |
Counterweights - Medium | 240 kg529 lb |
Minimum Counterweight Recommendations - Standard Stick: Loader Bucket - GP | 115 kg254 lb |
Minimum Counterweight Recommendations - Standard Stick: Loader Bucket - MP | 0 kg0 lb |
Note | *Machine Configuration – standard engine, standard stick hoe, standard cab with A/C, AWD standard shift transmission, 0.96 m³ MP loader bucket, 610 mm standard duty hoe bucket, 12.5/80-18 and 16.9-28 tires, no counterweight, 80 kg operator and full fuel tank. |
Features (1) | Heavy-duty rear axle with self adjusting inboard brakes, differential lock and final drives. |
Features (2) | AWD is engaged by front console panel switch or by brake pedal during all-wheel-braking operation. AWD can be engaged on the move, under load, in any gear, forward or reverse. AWD has outer final drives for easy maintenance. |
Features (3) | AWD front axle is pendulum mounted and permanently sealed and lubricated, requiring no daily maintenance. Also features double-acting steering cylinder with 52° steering angle for increased maneuverability. |
Front Axle (AWD) - Static | 22943 kg50581 lb |
Front Axle (AWD) - Dynamic | 9177 kg20232 lb |
Rear Axle - Static | 19120 kg42152 lb |
Rear Axle - Dynamic | 7648 kg16861 lb |
Type | Front Wheel |
Power Steering | Hydrostatic |
AWD Cylinder, One (1) Double Acting - Bore | 65 mm2.6 in |
AWD Cylinder, One (1) Double Acting - Stroke | 120 mm4.7 in |
AWD Cylinder, One (1) Double Acting - Rod Diameter | 36 mm1.4 in |
Turning Circle - AWD (inner wheel not braked) - Outside Front Wheels | 8.18 m26.8 ft |
Turning Circle - AWD (inner wheel not braked) - Outside Widest Loader Bucket | 10.97 m36 ft |
Type | Fully enclosed boosted, hydraulic, multiple discs. |
Features (1) | Inboard oil-immersed, hydraulically actuated multiple Kevlar discs on final drive input shaft. |
Features (2) | Completely enclosed and sealed. |
Features (3) | Self-adjusting. |
Features (4) | Dual foot-operated boosted brake pedals can be interlocked for roading. |
Features (5) | Parking/secondary brakes are independent of the service brake system. Parking brake is mechanically applied through a hand lever located in the right side console. |
Features (6) | Meets ISO 3450:1996 requirements. |
Overall Length - In Roading Position | 5726 mm225.4 in |
Overall Transportation Length | 5678 mm223.5 in |
Overall Transportation Height - 4.3 m | 3757 mm147.9 in |
Overall Width - Excluding Loader Bucket | 2346 mm92.4 in |
Height - Top of Cab/Canopy | 2869 mm113 in |
Height - Top of Exhaust Stack | 2716 mm106.9 in |
Rear Axle - Centerline to Front Grill | 2708 mm106.6 in |
Wheelbase - AWD | 2200 mm86.6 in |
Note | Dimensions and performance specifications shown are for machines equipped with 12.5/80-18 SGL front tires, 16.9-28c rear tires, standard cab, standard stick with 610 mm standard duty bucket, and 1.05 m³ GP loader bucket and standard equipment unless otherwise specified. |
Overall Length - In Roading Position | 5682 mm223.7 in |
Overall Transportation Length | 5675 mm223.4 in |
Overall Transportation Height - 4.3 m | 3757 mm147.9 in |
Overall Width - Excluding Loader Bucket | 2346 mm92.4 in |
Height - Top of Cab/Canopy | 2869 mm113 in |
Height - Top of Exhaust Stack | 2716 mm106.9 in |
Rear Axle - Centerline to Front Grill | 2708 mm106.6 in |
Wheelbase - AWD | 2200 mm86.6 in |
Note | Dimensions and performance specifications shown are for machines equipped with 12.5/80-18 SGL front tires, 16.9-28c rear tires, standard cab, standard stick with 610 mm standard duty bucket, and 1.05 m³ GP loader bucket and standard equipment unless otherwise specified. |
Capacity | 1.05 m³37.08 ft³ |
Width | 2262 mm89.1 in |
Lift Capacity at Maximum Height | 3610 kg7959 lb |
Lift Breakout Force | 54.46 kN12243 |
Tilt Breakout Force | 53.92 kN12122 |
Tipping Load - Breakout Point | 7012 kg15459 lb |
Maximum Hinge Pin Height | 3447 mm135.7 in |
Dump Angle at Full Height | 46° |
Dump Height at Maximum Angle | 2733 mm107.6 in |
Dump Reach at Maximum Angle | 900 mm35.4 in |
Maximum Bucket Rollback at Ground Level | 38° |
Digging Depth | 88 mm3.5 in |
Maximum Grading Angle | 113° |
Grill to Bucket Cutting Edge, Carry Position | 1482 mm58.3 in |
Maximum Operating Height | 4368 mm172 in |
Bucket Weight - Excluding Teeth and Forks | 428 kg944 lb |
Capacity | 0.96 m³33.9 ft³ |
Width | 2262 mm89.1 in |
Lift Capacity at Maximum Height | 3475 kg7661 lb |
Lift Breakout Force | 54 kN12140 |
Tilt Breakout Force | 60.48 kN13596 |
Tipping Load - Breakout Point | 7110 kg15675 lb |
Maximum Hinge Pin Height | 3447 mm135.7 in |
Dump Angle at Full Height | 46° |
Dump Height at Maximum Angle | 2764 mm108.8 in |
Dump Reach at Maximum Angle | 825 mm32.5 in |
Maximum Bucket Rollback at Ground Level | 39° |
Digging Depth | 147 mm5.8 in |
Maximum Grading Angle | 116° |
Grill to Bucket Cutting Edge, Carry Position | 1450 mm57.1 in |
Maximum Operating Height | 4368 mm172 in |
Bucket Weight - Excluding Teeth and Forks | 611 kg1347 lb |
Digging Depth - SAE Maximum | 4119 mm162.2 in |
Digging Depth, Manufacturer's Maximum | 4709 mm185.4 in |
Digging Depth - 2440 mm Flat Bottom | 3743 mm147.4 in |
Digging Depth - 600 mm Flat Bottom | 4094 mm161.2 in |
Digging Depth, 600 mm Flat Bottom, Manufacturer's | 4670 mm183.9 in |
Reach from Swing Pivot at Ground Line | 5609 mm220.8 in |
Maximum Operating Height | 5719 mm225.2 in |
Loading Height | 4031 mm158.7 in |
Loading Reach | 1477 mm58.1 in |
Swing Arc | 180° |
Bucket Rotation | 205° |
Stabilizer Overall Width | 2242 mm88.3 in |
Bucket Dig Force | 57.22 kN12864 |
Stick Dig Force | 35.29 kN7934 |